2. sks
  3. EDGE AL 56

sks EDGE AL 56 User manual

  • Hello! I've reviewed the user manual for the SKS EDGE AL 56 SET fender. This document provides step-by-step instructions for attaching the fenders, including how to use the sliding bridge and adjust the stays. I am ready to answer your questions about the installation process.
  • What is the minimum distance to keep between fender and tire?
    Does the set include screws?
GERMANY
1.
2.
1 Nm
1 Nm
LONG
SHORT
LONG
SHORT
2.1
2.2
6.1
1 Nm
3.
1.
2.
*
3.
1.
2.
1 Nm
MANUAL ¬ EDGE AL 56 SET ¬ 11530
ALLROAD ROAD
1. Stay-assembling front + rear
To item 2.+3.+4.
Various parts for
mounting the fenders
Parts
Spacers for forks
with disc brakes
Slidingbridge
ATTENTION!
Keep the minimum
distance of 15 mm
between fender and tyre.
2.1Brake-ttingfront
2. Frame mounting front
2.2 Stay attachment front incl. lengths adjustments of the stays
3. Frame mounting rear
3.2 Assembling of sliding bridge 90° degree angle
3.3 Assembling of sliding bridge 0° degree angle
3.1 Remove the rear wheel
3.2.1 Screw the sliding bridge
4. Assembling at the bottom bracket
3.2.2 Clip the fender on the sliding bridge
5. Remount the rear wheel
Mounting of spacers for frames with disc brakes
6.1 Stay attachment rear incl. lengths adjustments of the stays
6. Rear stay assembling
* Screw is not included in
the scope of delivery
ATTENTION!
/