2. sks
  3. BLUEMELS 75 U

sks BLUEMELS 75 U User manual

  • Hello! I have reviewed the mounting instructions for the SKS BLUEMELS 75 U SET mudguards. This document provides detailed steps for assembling and mounting the mudguards, including stay adjustments and frame mounting. I'm ready to assist with any questions you have on the components, the mounting process, and general usage of the mudguards.
  • What is the minimum distance required between the fender and the tire?
    What are the optional spacers for?
    Is a screw included for mounting with an angle of 90?
MOUNTING INSTRUCTION BLUEMELS 75 U SET ¬ 11527
ALLROAD MOUNTAIN
GERMANY
1 Nm
1 Nm
1. Stay-assembling front + rear
rear
355 mm
335 mm
Parts
Spacers for:
► Forks with disc brakers
► Frame mounting rear
Optional
Various parts for
stay-assembling
To item 1.
ATTENTION!
Keep the minimum distance of
15 mm between fender and tyre.
Various parts for
mounting the fenders
To item 2.
To item 3.
1.
2.
355 mm
335 mm
2.1.1Bracket-ttingfront2.1 Mounting the front plugs
2. Frame mounting front
2.2 Optional .ttingstrapsfront
3.
1.
4.
2.
MOUNTING INSTRUCTION BLUEMELS 75 U SET ¬ 11527
ALLROAD MOUNTAIN
GERMANY
ACCESSORIES:
11260 Suspension fork mounts for Rock Shox and Suntour, angeld
11259 Suspension fork mounts for Rock Shox and Suntour
3. Frame mounting rear
3.2 Mounting the rear mudguard onto the frame direct by screwing it on at an angle of 0°
3.3 Mounting with an angle of 90°
3.1 Remove the rear wheel
3.3.1 Screw the bracket
3.3.2
Screw the fender on the frame
2.1 2.2
2.3
2.3 Stay attachment front incl. lengths adjustments of the stays
1 Nm 3.
1.
2.
Optional:
Clamp
3 Nm
Spacer
Optional
3 Nm
3.4 Remount the rear wheel
ATTENTION OPTIONAL! Mounting of spacers for frames with disc brakes
3.5.1 Stay attachment rear incl. lengths adjustments of the stays
3.5 Rear stay assembling
* Screw is not includet in
the scope of delivery
*
3.
1.
2.
2.
3.5
3.3
3 Nm
/