Crestron SP-CASE User manual

Crestron Electronics, Inc. Specifications subject

15 Volvo Drive to change without notice.

Rockleigh, NJ 07647

Tel: 888.CRESTRON / 201.767.3400 Doc. 5740

Fax: 201.767.7576 / BBS: 201.767.5506 12.98

www.crestron.com

SmartPresenter™ Carrying Case:

SP-CASE

The SP-CASE has been designed as a carrying case for the SmartPresenter system.

Its lightweight, hard-shell plastic construction offers maximum protection. The pre-cut

foam included with the case has provisions for the SmartPresenter system hardware

and accessories.

Instructions

The illustration below shows the provisions for the SmartPresenter system hardware and miscellaneous

accessories. Place the system components in the designated area. The pre-cut foam securely holds the

components in place.

SP-Case: System Component Locations

SP-1

CNWM / CNWML

ACCESSORIES

POWER

PACK

ANTENNA

NOTE: Before traveling with the SP-CASE, make sure it closes completely and both cover clips are

secured in the closed position.