Robertshaw 41-208 Series Gas Range Ignitor User manual

  • Hello! I am an AI chatbot trained to assist you with the Robertshaw 41-208 Series Gas Range Ignitor User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
INSTALLATION DATA
41-208 SERIES
GAS RANGE IGNITOR
WARNING
 Thisignitorshouldbeinstalledbyaqualiedservicetechnician.
 Improperinstallaoncanpresentahazard.
 ThisisaNortonlgnitorwithapowderblueceramic.Amprangto
 openvalveandignitegasis2.5to3.0amps.(TypicallyROUND
 CARBORUNDUMIGNITORSTYLE).
 UseonlywhereaRobertshawHVCoranEatonNC1400orNC4000
 seriesgasvalveisspecied.
 Othernumberstolookforonthevalvecouldbe774T1OOP,
 774T11OP,and774T109Pseries.
KIT INCLUDES:
BracketA BracketB BracketC BracketD
(2)10-359Screws8-32x1/2”
(2)10-3608x1/2”
(2)10-36110x3/8”
(2)10-36210x3/4”
(2)10-3638x1/4
(2)WireNuts
Thiskitwillreplacesixdierentpopularapplicaons.Reviewallsixand
picktheapplicaonthatsuitsyourburnerstyle.Thenfollowstep-
by-stepinstrucons.
BURNER APPLICATION #1
1.Turnogasandelectricalsupplybeforeservicing.
2.Removeovenracks,racksupports,andovenboom.
3.Removeignitorthendisconnectthetwowiresfromignitor.
ASSEMBLY
1.AachbracketCtoignitorusingthetwo10-360screws(8x1/2).
2.Aachignitortoburnerusingthetwo10-359screws(8-32x1/2).
3.Reconnectwires.
BURNER APPLICATION #2
1.Turnogasandelectricalsupplybeforeservicing.
2.Somemodelsmayrequireremovingthedoor.Opendoor2”and
liupando.
3.Removeovenracks,racksupports,andovenboom.
4.Removeignitorthendisconnectthetwowiresfromignitor.
ASSEMBLY
1.AachbracketBtobackwallofoven.Useoriginalscrews.
2.Aachignitortobracketusingthetwo10-363screws(8x1/4).
3.Reconnectwires.
BURNER APPLICATION #3
1.Turnogasandelectricalsupplybeforeservicing.
2.Somemodelsmayrequireremovingthedoor.Opendoor2”and
liupando.
3.Removeovenracks,racksupports,andovenboom.
4.Disconnectthetwowiresfromignitor.
5.Removeburnerwithignitorsllaached.
6.Removeignitor.
ASSEMBLY
1.AachignitortoburnerusingbracketAasaspacerwiththetwo
10-362screws(10x3/4).
2.Placeburnerbackinproperposion.
3.Reconnectwires.
CustomerServiceTelephone1.800.304.6563
CustomerServiceFacsimile1.800.426.0804
Robertshaw®,Ranco®,Paragon®andUni-Line®are
trademarksofRobertshaw,itssubsidiariesand/or
affiliatedcompanies.Allotherbrandsmentioned
maybethetrademarksoftheirrespectiveowners.
ForTechnicalService
Telephone1.800.445.8299
Facsimile1.630.260.7294
www.uni-line.com
www.robertshaw.com
©2014Robertshaw
11/14–1-817RevB
BURNER APPLICATION #4
1.Turnogasandelectricalsupplybeforeservicing.
2. Somemodelsmayrequireremovingthedoor.Opendoor2”and
 liupando.
3. Removeovenracks,racksupports,andovenboom.
4. Disconnectthetwowiresfromignitor.
5. Removeburnerwithignitorsllaached.
6. Removeignitor.
ASSEMBLY
1. AachbracketDtoburnerusingoriginalscrews.
2. Aachignitortobracketusingthetwo10-363screws(8x1/4).
3. Placeburnerbackinproperposion.
4. Reconnectwires.
BURNER APPLICATION #5
1. Turnogasandelectricalsupplybeforeservicing.
2. Somemodelsmayrequireremovingthedoor.Opendoor2”
andliupando.
3. Removeovenracks,racksupports,andovenboom.
4. Disconnectthetwowiresfromignitor.
5. Removeburnerwithignitorsllaached.
6. Removeignitor.
ASSEMBLY
1. AachbracketBtoburnerusingoriginalscrews.
2. Aachignitortobracketusingthetwo10-363screws(8x1/4).
3. Placeburnerbackinproperposion.
4. Reconnectwires.
BURNER APPLICATION #6
1. Turnogasandelectricalsupplybeforeservicing.
2. Somemodelsmayrequireremovingthedoor.Opendoor2”and
liupando.
3. Removeovenracks,racksupports,andovenboom.
4. Removeignitorthendisconnectthetwowiresfromignitor.
ASSEMBLY
1. AachbracketBtobackwallofoven.
2. Aachignitortobracketusingthetwo10-363screws(8x1/2).
3. Reconnectwires.
/