ABB Video indoor station M2231x-x User manual

Brand: ABB

Model: Video indoor station M2231x-x

Category: Door intercom systems

Type: User manual

This manual is also suitable for

M2231 SERIES

2TMD041600D0107

│

09.04.2018

Product manual

ABB-Welcome

M2231.-. 4.3" video hands-free indoor

station

Table of contents

Product manual 2TMD041600D0107 │

Table of contents

1 Notes on the instruction manual .................................................................................................................... 4

2 Safety ............................................................................................................................................................. 4

3 Intended use .................................................................................................................................................. 4

4 Environment ................................................................................................................................................... 5

4.1 ABB devices ....................................................................................................................................... 5

5 Product description ........................................................................................................................................ 6

5.1 Control elements ................................................................................................................................ 6

6 Technical data ............................................................................................................................................... 8

7 Mounting/Installation ...................................................................................................................................... 9

7.1 Requirement for the electrician .......................................................................................................... 9

7.2 General installation instructions ....................................................................................................... 10

7.3 Mounting ........................................................................................................................................... 11

7.3.1 Recommended installation height ..................................................................................................11

7.3.2 Dismantling .....................................................................................................................................11

7.3.3 Installation dimension .....................................................................................................................12

7.3.4 Wiring ..............................................................................................................................................12

7.3.5 Address setting ...............................................................................................................................12

7.3.6 Surface-mounted installation ..........................................................................................................13

7.3.7 Desktop-mounted installation .........................................................................................................14

7.3.8 Flush-mounted installation .............................................................................................................14

7.3.9 Cavity wall installation ....................................................................................................................16

7.3.10 Replace the front cover ..................................................................................................................16

8 Commissioning ............................................................................................................................................ 17

8.1 Device settings ................................................................................................................................. 17

8.2 Intercom call settings ....................................................................................................................... 19

8.3 Switch actuator settings ................................................................................................................... 21

8.4 Program button settings ................................................................................................................... 22

8.5 Call forward settings ......................................................................................................................... 23

8.6 Auto unlock settings ......................................................................................................................... 24

8.7 Outdoor station password settings .................................................................................................. 25

8.8 Ringtone settings ............................................................................................................................. 26

8.9 Volume settings ................................................................................................................................ 27

8.10 Date and time settings ..................................................................................................................... 28

8.11 Other settings ................................................................................................................................... 29

8.12 Blacklist settings ............................................................................................................................... 30

8.13 History review ................................................................................................................................... 31

8.14 Camera list ....................................................................................................................................... 32

8.15 Language settings ............................................................................................................................ 34

8.16 Information ....................................................................................................................................... 34

8.17 Reset factory default ........................................................................................................................ 35

Table of contents

Product manual 2TMD041600D0107 │

9 Operation ..................................................................................................................................................... 36

9.1 Incoming a call ................................................................................................................................. 36

9.2 Display and volume settings ............................................................................................................ 37

9.3 Communication menu ...................................................................................................................... 38

9.3.1 Overview .........................................................................................................................................38

9.3.2 Intercom call ...................................................................................................................................38

9.3.3 Call guard unit ................................................................................................................................39

9.3.4 Broadcast .......................................................................................................................................39

9.3.5 Switch actuator ...............................................................................................................................40

9.4 Cleaning ........................................................................................................................................... 41

Notes on the instruction manual

Product manual 2TMD041600D0107 │

1 Notes on the instruction manual

Please read through this manual carefully and observe the information it contains. This will

assist you in preventing injuries and damage to property, and ensure both reliable operation and

a long service life for the device.

Please keep this manual in a safe place. If you pass the device on, also pass on this manual

along with it. ABB accepts no liability for any failure to observe the instructions in this manual.

2 Safety

Warning

Electric voltage!

Dangerous currents flow through the body when coming into direct or indirect

contact with live components.

This can result in electric shock, burns or even death.

– Disconnect the mains power supply prior to installation and/or disassembly!

– Permit work on the 100-240 V supply system to be performed only by

specialist staff!

3 Intended use

This device is an integral part of the ABB-Welcome door communication system and operates

exclusively with components from this system. The device must only be installed in dry indoor

rooms.

Environment

Product manual 2TMD041600D0107 │

4 Environment

Consider the protection of the environment!

Used electric and electronic devices must not be disposed of with household

waste.

– The device contains valuable raw materials that can be recycled. Therefore,

dispose of the device at the appropriate collecting facility.

4.1 ABB devices

All packaging materials and devices from ABB bear the markings and test seals for proper

disposal. Always dispose of the packing materials and electric devices and their components via

an authorized collection facility or disposal company.

ABB products meet the legal requirements, in particular the laws governing electronic and

electrical devices and the REACH ordinance.

(EU-Directive 2012/19/EU WEEE and 2011/65/EU RoHS)

(EU-REACH ordinance and law for the implementation of the ordinance (EG) No.1907/2006)

Product description

Product manual 2TMD041600D0107 │

5 Product description

5.1 Control elements

Fig. 1: Control elements

No. Function

1 4.3" Color display

Communication button

■

While a call is coming, press this button to activate the communication within 30 s

and press again to end the call.

■

In standby mode, press this button to enter the communication menu.

– If the LED flashes slowly, this indicates an incoming call.

– If the LED illuminates, this indicates that a conversation is in progress.

– If the LED flashes rapidly, it indicates system is busy.

Unlock button

■

Open the door by pressing this button at any time.

■

Auto-unlock: the door is automatically opened after incoming call (for this function,

long press this button for more than 10 s until the backlit LED is on, the same

operation will switch off the function and LED will be off)

– The LED illuminates to indicate auto-unlock.

– The LED flashes fast, it means door is open exceeding the set time (sensor must

be connected first)

Surveillance button

■

In standby mode, press this button to surveil the default outdoor station.

■

While the display is on, press this button to switch to surveil next outdoor station.

(Function is available depending on the installation's type)

■

**While the display is on, long press this button to snapshot manually.

■

In standby mode, if the LED flashes, long press this button to display the "History"

menu.

– The LED flashes slowly to show the notification of missing call.

Product description

Product manual 2TMD041600D0107 │

Mute button

■

In standby mode, press this button to mute ringtone of this indoor station.

■

In standby mode, long press this button to mute ringtone of all indoor stations in

the same apartment.

■

While a call is coming, press this button to reject the call.

■

During the conversation, press this button to mute microphone.

– *The LED illuminates to indicate mute status

Programmable button 1

■

Default function of button 1 releases the 2nd lock connected with outdoor station.

■

In standby mode, long press this button for 3 s to send SOS alarm to guard unit.

And LED flashes slowly to indicate success and flashes fast to indicate fail.

■

*Programmable for addition function, e.g. call guard unit, intercom.

System setting button

Enter into the system setting for various functions of the device.

The LED flashes fast, it means setting is busy

8 **Induction loop function

Tab.1: Description

* For use of those buttons, please contact your electrical installer.

** The function is only available in M22343-.

Induction loop function

This function is available for hearing-impaired persons wearing a hearing aid to hear the person

speaking from the outdoor station or from other indoor stations during an intercom call.

The device is able to interface hearing aids with "T" function at a distance of around 35 cm.

Fig. 2: Distance

Technical data

Product manual 2TMD041600D0107 │

6 Technical data

Designation Value

Display resolution 480 x 272

Display size 4.3”

Operating temperature -10 °C…+55 °C

Storage temperature -40 °C…+70 °C

Protection IP 30

Single-wire clamps 2 x 0.28 mm² - 2 x 0.75 mm²

Fine-wire clamps 2 x 0.28 mm² - 2 x 0.75 mm²

Bus voltage 20-30 VDC

Size 137 mm x 155 mm x 24 mm

Tab.2: Technical data

Mounting/Installation

Product manual 2TMD041600D0107 │

7 Mounting/Installation

Warning

Electric voltage!

Dangerous currents flow through the body when coming into direct or indirect

contact with live components.

This can result in electric shock, burns or even death.

– Disconnect the mains power supply prior to installation and/or disassembly!

– Permit work on the 100-240 V supply system to be performed only by

specialist staff!

7.1 Requirement for the electrician

Warning

Electric voltage!

Install the device only if you have the necessary electrical engineering

knowledge and experience.

– Incorrect installation endangers your life and that of the user of the electrical

system.

– Incorrect installation can cause serious damage to property, e.g. due to fire.

The minimum necessary expert knowledge and requirements for the installation

are as follows:

– Apply the "five safety rules" (DIN VDE 0105, EN 50110):

1. Disconnect

2. Secure against being re-connected

3. Ensure there is no voltage

4. Connect to earth and short-circuit

5. Cover or barricade adjacent live parts.

– Use suitable personal protective clothing.

– Use only suitable tools and measuring devices.

– Check the type of supply network (TN system, IT system, TT system) to

secure the following power supply conditions (classic connection to ground,

protective grounding, necessary additional measures, etc.).

Mounting/Installation

Product manual 2TMD041600D0107 │

7.2 General installation instructions

■

Terminate all branches of the wiring system via a connected bus device (e.g., indoor station,

outdoor station, system device).

■

Do not install the system controller directly next to the bell transformer and other power

supplies (to avoid interference).

■

Do not install the wires of the system bus together with 100-240 V wires.

■

Do not use common cables for the connecting wires of the door openers and wires of the

system bus.

■

Avoid bridges between different cable types.

■

Use only two wires for the system bus in a four-core or multi-core cable.

■

When looping, never install the incoming and outgoing bus inside the same cable.

■

Never install the internal and external bus inside the same cable.

Mounting/Installation

Product manual 2TMD041600D0107 │

7.3 Mounting

7.3.1 Recommended installation height

Fig. 3: Recommended installation height

7.3.2 Dismantling

Fig. 4: Dismantiling

Open the housing of the panel by pulling the clamp at the bottom of the device.

Mounting/Installation

Product manual 2TMD041600D0107 │

7.3.3 Installation dimension

Fig. 5: Installation dimension

■

The bottom of the device has screw holes for fastening on the wall according to the above

dimension instructions.

■

In addition, the bottom of the device can be fixed to the existing flush-mounted box. The

dimension of the compatible flush-mounted box is shown in illustration above.

7.3.4 Wiring

Fig. 6: Wiring

Affix the bottom of the device and connect it in accordance with the illustration. The insulated

section of the cable end must not be longer than 10 mm.

7.3.5 Address setting

Set addresses of the preferred outdoor stations and the address of the indoor station on the

jumper. (See Chapter "Adjusting the device".)

Mounting/Installation

Product manual 2TMD041600D0107 │

7.3.6 Surface-mounted installation

Mounted on the wall

Fig. 7: Mounted on the wall

■

Affix the bottom of the device to the wall.

■

Latch the upper part of the device onto the bottom. Place the upper side of the device on the

lock-in lugs and then press the bottom side onto the bottom part of the device until it is

caught by the clamp.

Mounted with flush-mounted box

Fig. 8: Mounted with flush-mounted box

■

Affix the bottom of the device to the existing flush-mounted box.

■

Latch the upper part of the device onto the bottom part. Place the upper side of the device

on the lock-in lugs and then press the bottom side onto the bottom part of the device until it

is caught by the clamp.

Mounting/Installation

Product manual 2TMD041600D0107 │

7.3.7 Desktop-mounted installation

Fig. 9: Desktop-mounted installation

Affix the bottom of the device to the desktop bracket.

Latch the upper part of the device onto the bottom part. Place the upper side of the device on

the lock-in lugs and then press the bottom side onto the bottom part of the device until it is

caught by the clamp.

7.3.8 Flush-mounted installation

Dismantling the frame

Fig. 10: Dismantling the frame

For flush-mounted installation, dismantle the frame first.

Mounting/Installation

Product manual 2TMD041600D0107 │

Mounted with back cover

Fig. 11: Mounted with back cover

■

Affix the back cover inside the wall directly.

■

Latch the upper part of the device onto the bottom part. Place the upper side of the device

on the lock-in lugs and then press the bottom side onto the bottom part of the device until it

is caught by the clamp.

Mounted with metal flush-mounted box

Fig. 12: Mounted with metal flush-mounted box

■

Affix the metal flush-mounted box inside the wall.

■

Affix the back cover to the metal flush-mounted box.

■

Latch the upper part of the device onto the bottom part. Place the upper side of the device

on the lock-in lugs and then press the bottom side onto the bottom part of the device until it

is caught by the clamp.

Mounting/Installation

Product manual 2TMD041600D0107 │

7.3.9 Cavity wall installation

Fig. 13: Cavity wall installation

[1] Attach a pair of supporting brackets to the back cover of the indoor station. Place 4 screws

through the back cover and attach with 4 claw brackets.

[2] Rotate 4 claw brackets to attach to the supporting brackets and pull the rubber bands

around the corner of the claw brackets to fix the claws.

[3] Put the back cover into the cavity wall

[4] Tighten the screws

[5] Latch the upper part of the indoor station onto the bottom part. Place the upper side of the

indoor station on the lock-in lugs and then press the bottom side onto the bottom part of the

device until it is caught by the clamp.

7.3.10 Replace the front cover

Fig. 14: Replace the front cover

The installation of the indoor station is now complete.

Commissioning

Product manual 2TMD041600D0107 │

8 Commissioning

8.1 Device settings

Fig. 15: Device settings

No. Description

Station

Select switch to set the address of default outdoor station.

X10 X1

Selector switches to set the address (tens and units digits) of the indoor station.

X200 X100

Dip switches to set the address (hundreds digits) of the indoor station.

Master/slave function

Only one indoor station in each apartment must be set as "Master" (ON=Master). All additional

indoor stations in the same apartment must be set as "Slave (OFF=slave).

Terminal resistor

In video installations or mixed audio and video installations, the switch must be set as ON at

the last device of the bus line.

a b = BUS connection

door bell connection

DC GND =Additional power supply

6 Connector for induction loop

Tab.3: Description

Commissioning

Product manual 2TMD041600D0107 │

Connection

Fig. 16: Connection

No. Description

1 Connection for the doorbell pushbutton

■

Connection for the system controller

■

When using several indoor stations: connection for the internal bus

Commissioning

Product manual 2TMD041600D0107 │

8.2 Intercom call settings

Fig. 17: Intercom call settings

No. Functions

1 Choose the previous selection or scroll up

2 Choose the next selection or scroll down

3 Confirm the selection you choose or enter to edit it

4 Return to the previous screen

5 Add a new intercom list. A total of 32 intercom lists can be added

Existing intercom list: Press button √ to modify the settings.

means an external intercom from different apartments.

*For establishing an external intercom, each apartment must have a master indoor station.

Existing intercom list: Press button √ to modify the settings.

means an internal intercom in the same apartment.

Tab.4: Description

Commissioning

Product manual 2TMD041600D0107 │

Add an intercom call

Fig. 18: Add an intercom call

No. Functions

Enter to choose the call type:

– an external intercom means a call from different apartments

– an internal intercom means a call within the same apartment

Enter to change the target address, from 001 to 250.

*If the call type is the internal intercom, there is no need to set the target address.

Rename the intercom list:

Scroll through letters of the alphabet or numbers one by one with “+” or “-” button

After setting, press “save” tor confirm.

Page is loading ...

ABB Video indoor station M2231x-x User manual

Brand: ABB

Model: Video indoor station M2231x-x

Category: Door intercom systems

Type: User manual

This manual is also suitable for

M2231 SERIES

Download PDF

report

ABB Video indoor station M2231x-x User manual

This manual is also suitable for

ABB Video indoor station M2231x-x User manual

Related papers

Other documents