2. Home
  3. Home security & automation
  4. Door intercom systems
  5. Speco
  6. AIPK1

Speco AIPK1 Quick start guide

  • Hello, I've reviewed the Quick Start Guide for the Speco Technologies Door Intercom System AIPK1, including Indoor Station AIIS07, Outdoor Station AIOS06 and Power Supply AIPS03. This guide covers installation and features like door monitoring, unlocking, and password protection. I'm ready to answer any questions you might have about this system.
  • What is the default password for the indoor station?
    How long will the ringtone repeat when initiating a call?
    How can the door be unlocked?
1
June 21, 2023
AIPK1
|Single Door 2-Wire Video Intercom Kit
Quick Start Guide
2
June 21, 2023
Quick Start Guide
Kit Includes
1 – Indoor Station: AIIS07
1 – Outdoor Station: AIOS06
1 – Power Supply: AIPS03
Features
Ø Call, message, capture photos and record functionality.
Ø Door Lock/Unlock feature.
Ø Able to monitor doors.
Ø Password protected.
Ø Doorbell feature.
Ø Can have up to 4 indoor stations installed together.
Indoor Station
-Example image of the indoor station mounted
*Default password for the indoor station is: 123456
1) Video Monitoring- Click on to enter the monitor interface. This will have features such as:
Image effect, photo capturing and video recording tools.
2) Intercom- Click on to enter the intercom interface. The user will be able to call and talk in one
apartment or different apartments.
3) Message- Click on to enter the message interface. The user can check captured photos,
recorded videos, and view the devices information.
4) Settings- Click on to enter the settings interface. The user will be able to configure
ringtones/select languages/time and operate the configuration settings.
Outdoor Station
3
June 21, 2023
-600TVL doorbell camera -
-Front image
1) Calling residents- To initiate a call, press the upper/lower button. This will start the call to the Indoor
monitor. The ringtone will repeat for 30 seconds until the call is answered.
2) Unlock- The door can be unlocked through either the Indoor Monitor or by the external push button.
3) Lock- The door can be locked through the Indoor Monitor.
4) External camera extension- The outdoor station can be configured to have an external camera.
Power Supply
Installation
4
June 21, 2023
Power Supply Wiring
1) Begin wiring the power supply by first stripping (2) two-wire cables and stripping (1) AC power cord.
Remove the AC power cap. Loosen the top screws and connect a striped AC power cord (twin-core
power line) through the 2-pin connector. Tighten it after putting the wires through the two-pin
connector. After, take your (2) two-wire cables and connect them through Bus-A and Bus-B. 1 wire
for Bus-A & 1 wire for Bus-B.
Indoor Station Wiring
5
June 21, 2023
2) Begin by wiring the indoor station to the power supply. On the back of the indoor station take out the
phoenix connector and loosen up the first two pins. This is where the wires for Bus-A and Bus-B will
go. Use the two-wire cable and put it through the first two pins and then tighten the pins back up.
Outdoor Station Wiring
3) To wire the outdoor station to the power supply you will have to first take out the top screws with the
align key provided. Once the screws are out, the outer cover can be taken off. Find Bus-B & Bus-A on
the outdoor sta6on and wire it to Bus-B & Bus-A on the power supply.
Wiring Diagram
6
June 21, 2023
Speco Technologies is constantly developing and improving products. We reserve the right to modify product design
and specifications without notice and without incurring an obligation. Rev. 6/21/2023. We are not responsible for
typographical errors. ©2023 Speco Technologies. All rights reserved.
/