Phonic PCS1210 User manual

Brand: Phonic

Model: PCS1210

Category: Supplementary music equipment

Type: User manual

Phonic PCS1210 is a camera tracking conference system that can connect up to 100 microphone units (25 units for each channel) to one controller. It has multiple camera agreements and can realize camera tracking without other equipment. With its embedded system and LED display, you can easily configure the system functions and monitor the working condition. The system also supports hot-plug for microphone units, making it easy to add or remove units as needed.

User's Manual

iAMP1620 / iAMP3020

Camera tracking Conference system

ENGLISH .....................................I

V1.0 11 / 19 / 2019 1

PCS 1210

English

iAMP1620 / iAMP3020

English

A. Functions

B. Front Pannel

C. Rear Pannel

D. Chairman Unit

E. Delegate Unit

F. System Connection

G. Operating Instruction

H. Connecting with the Amplifier

Meet Setup

2..

Volume Setup

3..

Set Unit ID

4..

Camera Setup

5..

System Setup

6..

Default Setup

7..

System Info

CONTENTS

USER'S MANUAL

Phonic preserves the right to improve or alter any information within this

document without prior notice

iAMP1620 / iAMP3020

English

1. Read these instructions before operating this

apparatus.

2. Keep these instructions for future reference.

3. Heed all warnings to ensure safe operation.

4. Follow all instructions provided in this document.

5. Do not use this apparatus near water or in locations

where condensation may occur.

6. Clean only with dry cloth. Do not use aerosol or liquid

cleaners. Unplug this apparatus before cleaning.

7. Do not block any of the ventilation openings. Install

in accordance with the manufacturer

’

s instructions.

8. Do not install near any heat sources such as radiators,

heat registers, stoves, or other apparatus (including

9. Do not defeat the safety purpose of the polarized or

grounding-type plug. A polarized plug has two blades

with one wider than the other. A grounding type plug

has two blades and a third grounding prong. The wide

blade or the third prong is provided for your safety. If

the provided plug does not

into your outlet, consult

an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or

pinched particularly at plug, convenience receptacles,

and the point where they exit from the apparatus.

11. Only use attachments/accessories

by the

manufacturer.

12. Use only with a cart, stand, tripod, bracket, or

table

by the manufacturer, or sold with

the apparatus. When a cart is used, use caution

when moving the cart/apparatus

combination to avoid injury from tip-

over.

13. Unplug this apparatus during lighting

storms or when unused for long

periods of time.

14. Refer all servicing to

service personnel.

Servicing is required when the apparatus has been

damaged in any way, such as power-supply cord or

plug is damaged, liquid has been spilled or objects

have fallen into the apparatus, the apparatus has

been exposed to rain or moisture, does not operate

normally, or has been dropped.

IMPORTANT SAFETY INSTRUCTIONS

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK)

NO USER SERVICEABLE PARTS INSIDE

REFER SERVICING TO QUALIFIED PERSONNEL

The lightning flash with arrowhead symbol, within an

equilateral triangle, is intended to alert the user to the

presence of uninsulated

“

dangerous voltage

”

within the

product

’

magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is in-

tended to alert the user to the presence of important operat-

ing and maintenance (servicing) instructions in the literature

accompanying the appliance.

WARNING: To reduce the risk of or electric shock, do

not expose this apparatus to rain or moisture.

CAUTION: Use of controls or adjustments or performance

of procedures other than those

may result in

hazardous radiation exposure.

The apparatus shall not be exposed to dripping or splashing and that no objects

with liquids, such as vases,

shall be placed on the apparatus. The MAINS plug is used as the disconnect device, the disconnect device shall

remain readily operable.

Warning: the user shall not place this apparatus in the

area during the operation so that the mains switch

can be easily accessible.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

iAMP1620 / iAMP3020

English

A. Functions

■

.Embedded system,with LED display;

■

.Maximum 100 microphone units(25 units for each channel) can be

connected to one controller.

■

.More units

can be added with expanded device.

■

.Support hot-plug for microphone unit.

■

.Meet mode: voice control, FIFO, LIFO, chairman mode, all on mode.

■

.The total amount of speaking units can

be set from

(

included

chairman).

It has "All On"mode to active all the units.

■

.It

has auto off mode & time off mode for turning off the speaking

unit automatically.

Limited time can be set from 1-999 seconds.

■

With voice control function & the sensitivity can be configured by

the main unit.

■

. With RS232 ports.

It is easy to connect with other equipments.

■

Support multiple camera

agreements. Camera tracking

can

realized without other equipment.

B. Front Panel of the Main Unit

LED Display

Display the system configuration & working condition.

Configuring buttons

for the system functions.

ESC： to go back the main interface

ENTER：to carry out the menu function

↑/↓：to revise the data

←

/→：to turn page or to select

POWER：Power

switch & Indicator

iAMP1620 / iAMP3020

English

C. Rear Panel of the Main Unit

CENTRAL-TXD CENTRAL-RXD

PCS

1210

AC power input socket & fuse holder. Power

220V, fuse 2.5A.

Earphone jack

RCA 6.

3 jack for microphone

XLR audio output

Line in & Line out

Tel

in &

Tel out for telephone coupler

RS-485 port for camera

RS-232 port for camera

RS-232 port for video switch

10.

RS-232 port for sending signal to central controller

11.

RS-232 port for receiving signal from central controller

12.4 connection ports for

chairman/delegate units. Each port can be

connected with maximum 25 units

iAMP1620 / iAMP3020

English

D. Chairman Unit

E. Delegate Unit

Mic capsule: to pick

up the voice & send

it to amplifier.

Mic light loop: to

indicate the

working condition of the microphone.

Mic Display

Priority button: to

turn off

all

the

delegate units.

Mic button: to

turn on or turn off the

microphone

Earphone jack

Mic capsule: to pick up the voice & send it to

amplifier.

Mic light loop: to indicate the working

condition

of the microphone.

Mic Display

Mic button: to turn on or turn off the

microphone

Earphone jack

iAMP1620 / iAMP3020

English

F. System Connection Diagram

CENTRAL-TXD

CENTRAL-RXD

iAMP1620 / iAMP3020

English

iAMP1620 / iAMP3020

EnglishEngli

PCS1210

G. Operating Instruction

>>1. Meet Setup

（1）Meet Mode

Discuss Mode: Camera tracks the last

turned on unit.

Auto Mode: Camera tracks the speaking

unit.

Chairman Mode: Only Chairman unit can be turned on.

All On Mode: All the

units can be turned on. No limitation for speaking QTY.

Responder Mode: Only one delegate can be turned on. Once one delegate has been

turned on, others can not be turned on.

（

2）Queue Mode:

FIFO&LIFO: Select first in first out or last in first out for the queue.

（3）Auto OFF

To turn off the microphone automatically if the

chairman or delegate

do not speak in certain time.

0S means this function is unavailable.

（4）Time OFF

To turn off the microphone compulsively by the set

certain

time.

（5）Speaker

To set the limitation for speaking units QTY.

（6）Voice

To turn ON/OFF sound control function. If click sound control(ON),

mic unit will be

turned on when speaking to the mic.

（7）All ON

All the units will be turned on. This function can only be realized

when "Meet

Mode"is set "All On Mode"

（8）All Off

All the units will be turned off.

（9）Unit

To turn on/off a certain unit

Meet Mode:

Discuss Mode

Queue Mode:

FIFO Mode

Auto OFF:

OFF 00M 00S

4. Time OFF:

OFF 00M 00S

Speaker:04

Voice:OFF

All ON

All

Off

9. Unit:OFF 001

10. Priority Set:

Manul Recover

Priority tone:OFF

iAMP1620 / iAMP3020

English Español

EnglishEngli

PCS1210

（10）Priority Set

Manual Recover: Delegate units will be off when pressing the chairman priority once.

Delegate units need to be turned on manually by pressing the ON/OFF button.

Auto Recover: Delegate units will be off when long pressing the chairman priority button.

Delegate units will be on again when releasing the priority button.

Priority Tone: To play a tone when pressing the chairman priority button.

>>2. Volume Setup

（1）Unit Vol: Set volume for speaker or earphone on

the unit

（2）Unit dB: Set triggered voice level for voice

control

（3）Unit Vol(Lock/Unlock): to lock/unlock manual volume setup by attendee

（4）Unit dB(Lock/Unlock): to lock/unlock manual volume setup by attendee

>>3. Set Unit ID

Press"Mic" on the unit to setup ID for each unit. Then unit

ID will be from 1 to "X" in order. Press "ESC" to terminate

setup.

If add units to the system, all unit ID need to be re-setup.

>>4.Camera Setup

Type: Pelco-D/Pelco-P/Sony/EVI-D70/BRC-

Z330(baud

rate:9600)/Yaan(baud rate:4800); Channel:

Select needed camera to

operate.

Unit: The current unit address for tracking setup

1. Unit Vol：31

2. Unit dB:31

3. Unit Vol:Unlock

4. Unit dB:Unlock

Type:EVI-D70

Channel:1

Unit:000

Camera Setup

Start Setup

iAMP1620 / iAMP3020

English Español

EnglishEngli

PCS1210

Camera Setup: Press Enter to shift "Move "/

"Zoom

"control. Adjust camera by pressing different direction

button to control the movement & zoom of camera.

Press "Enter" for one second to save

preset position.

Speed

: to

set

rotation

speed

the

camera

Focusing:Focus range,the camera will adjust

automatically,manual operation can be

applied when needed.

Preview preset: to check the saved preset point list.

Test preset: to recall certain preset position.

Test panorama: to check panorama setup Clear preset:

to clear

all the preset position. It will require to enter

system password(default password is:000000).

Video: choose HD / SD when using HD camera / SD

camera

>>5.System Setup

（1）Volume

Set Line In/Line Out volume from 0-31

（2）Password

Left Right

Down

Move / Zoom

000

Speed

Speed+

Focus+

Preview preset

Test preset:000

Test panorama

Clear preset

Video:HD

Volume

Password

Line In: 00

Line Out:08

Focus

iAMP1620 / iAMP3020

English Español

EnglishEngli

System Password: To reset system password. Default

password is "000000"

（4）Boot Password: “ON”means system will require user to enter password when turn on

the system.“OFF”means no

need to enter password.

>>6. Default Setup

To load default setting for the system.

>>7.System Info

（1）Version: to check current system information

（2）System Check

Control button, display monitor & communication

can be checked here.

H.Connect Amplifier

Adjust the volume of amplifier to the minimum level and line out at

Testing

personnel need to speak toward the units while adjust

the volume

to an appropriate level.

The

position of speaker installation is important, avoid

place

microphone

units

toward

speaker in case of howling effect occur.

System Password

Boot Password:OFF

Default Settings

Versions Info

System

Check

Old PWD:-----

New PWD:-----

PCS1210

iAMP1620 / iAMP3020

English

SERVICE AND REPAIR

For replacement parts, service and repairs please contact the Phonic distributor in your

country. Phonic does not release service manuals to consumers, and advice users to not

attempt any self repairs, as doing so voids all warranties. You can locate a dealer near you at

http://www.phonic.com/where/.

WARRANTY INFORMATION

Phonic stands behind every product we make with a no-hassles warranty. Warranty coverage

may be extended, depending on your region. Phonic Corporation warrants this product for a

minimum of one year from the original date of purchase against defects in material and

workmanship under use as instructed by the user’s manual. Phonic, at its option, shall repair

or replace the defective unit covered by this warranty. Please retain the dated sales receipt as

evidence of the date of purchase. You will need it for any warranty service. No returns or repairs

will be accepted without a proper RMA number (return merchandise authorization). In order to

keep this warranty in effect, the product must have been handled and used as prescribed in the

instructions accompanying this warranty. Any tampering of the product or attempts of self repair

voids all warranty. This warranty does not cover any damage due to accident, misuse, abuse,

or negligence. This warranty is valid only if the product was purchased new from an authorized

Phonic dealer/distributor. For complete warranty policy information, please visit

http://www.phonic.com/warranty/.

CUSTOMER SERVICE AND TECHNICAL SUPPORT

We encourage you to visit our online help at http://www.phonic.com/support/. There you can find

answers to frequently asked questions, tech tips, driver downloads, returns instruction and other

helpful information. We make every effort to answer your questions within one business day.

[email protected]

http://www.phonic.com

Phonic PCS1210 User manual

Brand: Phonic

Model: PCS1210

Category: Supplementary music equipment

Type: User manual

Download PDF

report

Phonic PCS1210 User manual

Phonic PCS1210 User manual

Related papers

Other documents