Danfoss AMV 25 SD/SU is an actuator for three point control, which can be mounted with the valve stem in either horizontal position or pointing upwards. It has a spring function that will fully open or close the valve when the power is removed, depending on the spring action selected. The valve selection will also affect the spring action.
The manual override is achieved by disconnecting the power supply, removing the cover, and inserting a 5 mm Allen key (not supplied) into the top of the positioning spindle and turning the key against the spring. To hold a manual override position, the key must be wedged.
Danfoss AMV 25 SD/SU is an actuator for three point control, which can be mounted with the valve stem in either horizontal position or pointing upwards. It has a spring function that will fully open or close the valve when the power is removed, depending on the spring action selected. The valve selection will also affect the spring action.
The manual override is achieved by disconnecting the power supply, removing the cover, and inserting a 5 mm Allen key (not supplied) into the top of the positioning spindle and turning the key against the spring. To hold a manual override position, the key must be wedged.
Danfoss AMV 25 SD/SU is an actuator for three point control, which can be mounted with the valve stem in either horizontal position or pointing upwards. It has a spring function that will fully open or close the valve when the power is removed, depending on the spring action selected. The valve selection will also affect the spring action.
The manual override is achieved by disconnecting the power supply, removing the cover, and inserting a 5 mm Allen key (not supplied) into the top of the positioning spindle and turning the key against the spring. To hold a manual override position, the key must be wedged.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI