V-ZUG 032 Installation guide

Type
Installation guide

V-ZUG 032 is a glass ceramic hob with frameless design and beveled edges, offering a sleek and modern look to your kitchen. Its advanced features and versatile cooking options make it a great choice for home cooks who value convenience and precision.

Here are some of its key capabilities:

  • Precise temperature control: With its intuitive touch controls, you can effortlessly adjust and maintain the desired temperature for each cooking zone, ensuring perfect results for a variety of dishes.

  • Energy-efficient cooking: The hob's efficient design minimizes heat loss, allowing you to save energy while cooking. Its rapid heat-up time also means you can start cooking quickly and efficiently.

V-ZUG 032 is a glass ceramic hob with frameless design and beveled edges, offering a sleek and modern look to your kitchen. Its advanced features and versatile cooking options make it a great choice for home cooks who value convenience and precision.

Here are some of its key capabilities:

  • Precise temperature control: With its intuitive touch controls, you can effortlessly adjust and maintain the desired temperature for each cooking zone, ensuring perfect results for a variety of dishes.

  • Energy-efficient cooking: The hob's efficient design minimizes heat loss, allowing you to save energy while cooking. Its rapid heat-up time also means you can start cooking quickly and efficiently.

Installation instructions
Glass ceramic hob Toptronic
Frameless, with facets
J039.133-1
10.1.11 SCTH
1
These installation instructions apply to the model: 032 (GK45TEBS.1)
Identification plate
The identification plate is next to the connection plate.
Affix the second identification plate (enclosed) in an accessible position behind the front
of the fitted cabinet beneath the appliance.
Refer to the identification plate for specifications for the required mains voltage, current type and fuses.
Application height of the appliance: up to max. 2000 m above sea level
The appliance is equipped with a mains cable that should be connected to a distribution box by the customer. For pyrometric reasons
the connection cable is not to be exchanged.
The appliance should be installed by qualified personnel only. Each step must be carried out and checked in full in the order
specified.
Validity
General notes
If fitting in flammable material, the guidelines and standards for low voltage installations and for the fire protection must be
strictly observed.
Installation accessories included
Designation Art. no.
Mounting angle right/left H6.2623
Wood screws for mounting angle Misc.
Accessories
Designation Art. no.
Thermal screen set H6.2622
Instant adhesive for installation in stone work surfaces
Permabond F246, incl. Activator, 50 ml tube. From Silitech AG, 3008 Bern.
B11.502
Set of fixing brackets for special installation cases H6.1548
Electrical connections
Electrical connections must made by trained electricians in accordance with the guidelines and standards for low voltage
installations and the specifications of the local electricity supply companies.
A plug-in appliance may only be connected to a socket outlet with earthing contact, installed according to specifications. An
all-pole mains isolating device with 3 mm contact opening should be provided in the house wiring system. Switches, plug and
socket devices, circuit breakers and fusible cut-outs which are accessible after installation and which have all-poles switching
are permissible as isolating devices. Effective earthing and separately installed neutral and earth conductors ensure safe and
fault-free operation. After installation, live parts and cables with basic insulation must not be accessible. Old installations should
always be checked.
Connection plate
Identification plate
600/550
Installation pipe
Clamp
Distribution box
400 V~ 2N
230 V~
230 V~
AUS / NZ
PE/
PE/
yellow/
green
N blue
L1 brown
L2 black
yellow
/
green
N blue
L1 brown
Installation instructions
Glass ceramic hob Toptronic
Frameless, with facets
J039.133-1
10.1.11 SCTH
2
Indications
The work surface must be flat, to ensure the required sealing against ingressing of liquids.
Installing
The layout of the cooking zones on the integrated hob may differ from the illustrated hob!
With wood work surfaces
1. Create the installation cut-out accurately.
2. Centre mounting rails A and fix in the installation cut-out with the wood screws C according to the drawing.
3. All stop positions D must be removed before installing the appliance.
4. Where necessary establish mains supply connection before inserting the appliance.
5. Lower the appliance symmetrically into the installation cut-out as far as the work surface, on to the spring catch elements.
The connection cable is not to touch the hot parts of the metal tray under the cooking zones.
With stone work surfaces
With stone work surfaces, mounting rails A can be bonded in place (for adhesive see
ACCESSORIES).
1. Clean/prime the bonding surfaces on the stone and the mounting rails then allow to dry thoroughly.
2. Apply the adhesive to the stone and smooth with the spatula. Apply a thin coating of the activator to the bonding surface of the
installation rails.
3. Position the installation rails centrally and press well in. Comply with the recommended bonding time for the utilized adhesive.
4. Where necessary establish mains supply connection before inserting the appliance.
5. Lower the appliance symmetrically into the installation cut-out as far as the work surface, on to the spring catch elements.
The connection cable is not to touch the hot parts of the metal tray under the cooking zones.
Installation
The distance from the appliance cut-out to flammable walls (left, right and rear) must be at least 50 mm. Parts such as partition
walls, reinforcing strips which protrude into the installation space under the cooking zone must be of non-flammable materials.
The distance between the underside of the appliance tray and any kitchen unit parts of flammable material must be at least
20 mm. When installed directly under a drawer and if the tray can be reached from below without tools, a protective guard must
be used. The thermal screen set (see ACCESSORIES) is recommended.
Y – Y
A
560 ±1
584
514
490 ±1
min. 50
min. 25
600
600/550
min. 20
Y
Y
CD
23
max. 39.2
from support
Set of fixing brackets for
special installation cases
Aim for a
max. of R10
Centering marks,
front/rear
Centering mark,
middle of cut-out
Cable length 1.5 m
Drawer/cabinet
  • Page 1 1
  • Page 2 2

V-ZUG 032 Installation guide

Type
Installation guide

V-ZUG 032 is a glass ceramic hob with frameless design and beveled edges, offering a sleek and modern look to your kitchen. Its advanced features and versatile cooking options make it a great choice for home cooks who value convenience and precision.

Here are some of its key capabilities:

  • Precise temperature control: With its intuitive touch controls, you can effortlessly adjust and maintain the desired temperature for each cooking zone, ensuring perfect results for a variety of dishes.

  • Energy-efficient cooking: The hob's efficient design minimizes heat loss, allowing you to save energy while cooking. Its rapid heat-up time also means you can start cooking quickly and efficiently.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI