GT-4ZP
4-Way Video & Power Distribution Adaptor (1 PS-2420UL required per GT-4ZP)
The GT-4ZP allows one PS-2420UL to power up four GT-1C7W app-enabled tenant stations. The GT-4ZP
replaces existing GT-4Z adaptors in a standard GT system, and requires 1 PS-2420UL per GT-4ZP. Each
GT-4ZP includes 4 power jumpers (GTW-24J) that are to be installed on the GT-1C7W between the B1/B2
and +/- terminals, which provides power to the GT-1C7W without having to install a local PS-2420UL for
each tenant station.
-INSTRUCTIONS-
GT-1C7W
GT-1C7W GT-1C7W
GT-1C7W
PS-2420UL
To GT-BC and GT-VBC
To GT-4ZP
B1/B2 are
polarized. It is
important to
maintain that
polarity or the
equipment could
be damaged.
B1 is positive, and
B2 is negative.
GT-4ZP to PS-2420UL
max 16’ (5m)
Up to 4 GT-2C
can be wired
to 1 GT-4ZP.
Wire the GT-2C
the same as
GT-1C7W
IN IN OUT OUT DC 24V
B1 B2 R1 R2 B1 B2 R1 R2 + -
-20': -20':
IN IN OUT OUT DC 24V
B1 B2 R1 R2 B1 B2 R1 R2 + -
-20':
B1 B2 R1 R2 B1 B2 R1 R2 + -
IN IN OUT OUT DC 24V
-20':
B1 B2 R1 R2 B1 B2 R1 R2 + -
IN IN OUT OUT DC 24V
GTW
24J
GTW
24J
GTW
24J
GTW
24J
GT-4ZP Instr
0621
SPECIFICATIONS
Power: 24V DC (One PS-2420UL per GT-4ZP)
Mounting: W-DIN11 (not included)
Contents: 1x GT-4ZP, 4x GTW-24J
Dimensions: 4-1/4” H x 4-13/16” W x 2-3/8” D
Temperature: 32-104° F (0-40° C)
WIRING
GTW-24J connection
on each GT-1C7W
B1
B2
B1
B2
R1
R2
R1
R2
C
CE
K
KE
+
-
IN
OUT
IN
OUT
GTW-24J
B1 B2 R1 R2 B1 B2 R1 R2 B1 B2 R1 R2
B1 B2 R1 R2 B1 B2 R1 R2 B1 B2 R1 R2
+ -
B1 B2 R1 R2 + - B1 B2 R1 R2 B1 B2 R1 R2
IN DC24V OUT (1) OUT (2)
LINE OUT OUT (3) OUT (4)
B1 B2 R1 R2 B1 B2 R1 R2 B1 B2 R1 R2
GT-4ZP to GT-1C7W - max 165’ (50m)
GT-4ZP
These instructions only include information on the installation of the GT-4ZP.
Please see the GT Installation Manual for complete system information.
SW1
Set SW1 to A
for last GT-4ZP
on trunk.
1A
B
SW1
iphone Corporation
(800) 692-0200
www.aiphone.com