Davis Instruments New Anemometer Design Owner's manual

Brand
Davis Instruments
Model
New Anemometer Design
Category
Security device components
Type
Owner's manual

Davis Instruments New Anemometer Design

The Davis Instruments New Anemometer Design is a significant improvement over the previous model, offering a wider operating range, greater durability, and the same accurate data that Davis weather stations are known for. With an operating range of less than 1 mph to over 220 mph, this anemometer can measure wind speeds in a variety of conditions, from gentle breezes to hurricanes. It is also more durable than the previous model, making it ideal for use in harsh environments.

This anemometer is easy to install and use. Simply attach the wind cups to the stainless steel shaft and tighten the set screw with the included Allen wrench. The anemometer can then be mounted on a pole or other structure using the included mounting hardware.

Davis Instruments New Anemometer Design

The Davis Instruments New Anemometer Design is a significant improvement over the previous model, offering a wider operating range, greater durability, and the same accurate data that Davis weather stations are known for. With an operating range of less than 1 mph to over 220 mph, this anemometer can measure wind speeds in a variety of conditions, from gentle breezes to hurricanes. It is also more durable than the previous model, making it ideal for use in harsh environments.

This anemometer is easy to install and use. Simply attach the wind cups to the stainless steel shaft and tighten the set screw with the included Allen wrench. The anemometer can then be mounted on a pole or other structure using the included mounting hardware.

Your Vantage Pro2™ has an
IMPROVED ANEMOMETER
Your Vantage Pro2 Integrated Sensor Suite includes an improved
anemometer. It now has a greater operating range of wind speeds, from
less than 1 mph to over 220 mph (1 - 173 kts; 0.5 - 89 m/s; 1 - 322 kph).
It will provide even greater durability in the eld, and provide the same
accurate data Davis weather stations are known for.
The new anemometer control head looks dierent from the old one. To
avoid confusion, please refer to these instructions and illustrations,
rather than the ones in your Vantage Pro2 ISS Installation manual.
Page 1: Components
The new housing has a dierent shape. Refer to this illustration of the
ISS components:
Anemometer
Vane
Wind Cups
Debris Screen
(place inside cone
after installation)
Rain Collector
Solar Panel
(wireless
ISS only)
Radiation
Shield
Anemometer Cable
40' (12.2 m)
Anemometer
Base
ISS Base
Anemometer
Arm
Control
Head
SIM
Housing
Console Cable 100' (30 m)
(Cabled ISS Only)
Sensor
Mounting Shelf
(ISS Plus Only)
UV and Solar
Sensors
(ISS Plus Only)
Metric Rain Adapter
(US versions only,
factory installed in
UK & EU versions)
Your Vantage Pro2™ has an
IMPROVED ANEMOMETER
Your Vantage Pro2 Integrated Sensor Suite includes an improved
anemometer. It now has a greater operating range of wind speeds, from
less than 1 mph to over 220 mph (1 - 173 kts; 0.5 - 89 m/s; 1 - 322 kph).
It will provide even greater durability in the eld, and provide the same
accurate data Davis weather stations are known for.
The new anemometer control head looks dierent from the old one. To
avoid confusion, please refer to these instructions and illustrations,
rather than the ones in your Vantage Pro2 ISS Installation manual.
Page 1: Components
The new housing has a dierent shape. Refer to this illustration of the
ISS components:
Anemometer
Vane
Wind Cups
Debris Screen
(place inside cone
after installation)
Rain Collector
Solar Panel
(wireless
ISS only)
Radiation
Shield
Anemometer Cable
40' (12.2 m)
Anemometer
Base
ISS Base
Anemometer
Arm
Control
Head
SIM
Housing
Console Cable 100' (30 m)
(Cabled ISS Only)
Sensor
Mounting Shelf
(ISS Plus Only)
UV and Solar
Sensors
(ISS Plus Only)
Metric Rain Adapter
(US versions only,
factory installed in
UK & EU versions)
Page 3:
In the list of parts, ignore the “drip ring.” It is now molded into the
housing.
Page 4:
Refer to this illustration when attaching the wind cups.
Tighten set
screw with
Allen wrench
Push cups onto
stainless steel
shaft
Attaching the Wind Cups
3465 Diablo Avenue, Hayward, CA 94545-2778 U.S.A.
510-732-9229 • Fax: 510-732-9188
E-mail: [email protected] • www.davisnet.com
®
Document No. 07395.273 Rev A February 6, 2013
©2013 Davis Instruments Corp. All rights reserved.
Vantage Pro is a registered trademark of Davis Instruments Corp. Hayward, CA.
Page 3:
In the list of parts, ignore the “drip ring.” It is now molded into the
housing.
Page 4:
Refer to this illustration when attaching the wind cups.
Tighten set
screw with
Allen wrench
Push cups onto
stainless steel
shaft
Attaching the Wind Cups
3465 Diablo Avenue, Hayward, CA 94545-2778 U.S.A.
510-732-9229 • Fax: 510-732-9188
E-mail: [email protected] • www.davisnet.com
®
Document No. 07395.273 Rev A February 6, 2013
©2013 Davis Instruments Corp. All rights reserved.
Vantage Pro is a registered trademark of Davis Instruments Corp. Hayward, CA.
  • Page 1 1
  • Page 2 2

Davis Instruments New Anemometer Design Owner's manual

Brand
Davis Instruments
Model
New Anemometer Design
Category
Security device components
Type
Owner's manual

Davis Instruments New Anemometer Design

The Davis Instruments New Anemometer Design is a significant improvement over the previous model, offering a wider operating range, greater durability, and the same accurate data that Davis weather stations are known for. With an operating range of less than 1 mph to over 220 mph, this anemometer can measure wind speeds in a variety of conditions, from gentle breezes to hurricanes. It is also more durable than the previous model, making it ideal for use in harsh environments.

This anemometer is easy to install and use. Simply attach the wind cups to the stainless steel shaft and tighten the set screw with the included Allen wrench. The anemometer can then be mounted on a pole or other structure using the included mounting hardware.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents