MOES WP-USD-WH-MS is a smart power plug that allows you to control your lights, fans, and other devices from anywhere using your smartphone or voice assistant. It connects to your existing Wi-Fi network and doesn't require a hub or bridge. You can use the Smart Life app to control your devices, set schedules, create scenes, and more. The smart plug is also compatible with Amazon Alexa and Google Assistant, so you can control your devices with your voice.
MOES WP-USD-WH-MS is a smart power plug that allows you to control your lights, fans, and other devices from anywhere using your smartphone or voice assistant. It connects to your existing Wi-Fi network and doesn't require a hub or bridge. You can use the Smart Life app to control your devices, set schedules, create scenes, and more. The smart plug is also compatible with Amazon Alexa and Google Assistant, so you can control your devices with your voice.
Instruction Manual
WiFi Smart Power Plug
Specification
Preparation for use
Description
This smart socket would connects to your existing home
Wi-Fi network easily to provide wireless control of your
lights- with no hub or bridge required.
Compatible with Tuya platform .You can control the
brightness of lights, adjust the fan, set schedules, or
include with other devices in lighting scenes to set the
perfect ambiance.
1.Make sure your phone is connected to Wi-Fi and the
Bluetooth is enabled.
Safety Information
Risk of Electric Shock: Electricity can cause personal
injury and property damage if handled improperly. If you
are not sure about any part of these instructions, please
seek professional assistance from a qualified electrician.
1.APP Download Smart Life APP
2.Register or Login
Download “Smart Life”Application
Enter the Register/Login interface; tap “Register” to
create an account by entering your phone number to get
verification code and “Set password”. Choose “Log in” if
you already have a Smart Life account.
Product Name: Smart Power Plug
Working Voltage: AC100V-240V 50/60Hz
Protocol: Wi-Fi 2.4G+Bluetooth
Working Temperature: -10~65℃
Rated Power (Resistive load): <200W
Support system: Android / iOS
Please scan the QR code or download Smart Life on App store.
Preparation: Ensure the switch has been connected with
electricity;ensure your phone has been connected to
Wi-Fi and is able to connect to the Internet.
The switch only supports 2.4G network.If you have
connected 5G network,please disconnect 5G network
firstly and connect 2.4G network.
3.Configure the APP to the switch
Note:
2.Confirm the device is ready for pairing mode(ON/OFF
the power button for 6 times and hold on on the 6th time
until the indication light flashes fast for app
configuration.)
Add device
On/off Button
3.Open Smart Life/Tuya App and Click“+”,then the
prompt page will automatically show on the screen.Click
“Add”.
4.Enter Wi-Fi Password and click “Next”,waiting for the
connection completed.
5.Add the device successfully, you can edit the name of
the device to enter the device page by click “Next”
BD26
1.During the free warranty period, if the product breaks down during normal
use, we will offer free maintenance for the product.
2.Natural disasters/man-made equipment failures, disassembly and repair
without the permission of our company, no warranty card, products beyond
the free warranty period, etc., are not within the scope of free warranty.
3.Any commitment (oral or written) made by the third party (including the
dealer/service provider) to the user beyond the warranty scope shall be
executed by the third party.
4.Please keep this warranty card to ensure your rights.
5.Our company may update or change the products without notice. Please
refer to the official website for the updates.
6.Click“Done”to enter the device page to enjoy your
smart life with home automation.
Equipment operating instructions
EZ mode: ON/OFF the power button for 6 times and hold
on on the 6th time until the indicator light flashes fast for
successful pairing/reset；
AP mode: ON/OFF the power button for 6 times and hold
on on the 6th time under EZ mode until the indicator light
flashes slowly to enter AP mode.
2.How to ON/OFF manually
Manually “short press” the on/off button to turn on/off
the device.
1.How to reset/re-pair Wi-Fi code
2.Confifigure the Amazon Echo device
(If you have already confifigured Amazon Echo, you can
skip this step. The following instructions are based on
the iOS client.)
① Make sure you Amazon Echo device is powered on
and connected to a Wi-Fi network.
② Open the Alexa APP on your phone and log in.
③ tap on the menu in the upper left corner of the Home
page, select “Settings” and tap “Set Up A New Device”
to set up the Amazon Echo.
④ Choose your Amazon Echo device type and language
for connecting.
⑤ Press and hold the small dot on the device until the
light turns yellow.
⑥ Click “Continue” to connect to the hotspot, connect to
the Amazon Echo hotspot, and return to the APP page.
⑦ Click “Continue” to find and connect to your home
① Tap on “Skills” in the Alexa App menu.
② Then search for “App Name”. Tap “Enable” to enable
the Skill.
③ Enter the App account and password, then tap “Link
Now” to link your App account to enable the Skill. Now
you can start your smart home journey.
3.Key step —— Link Skill
Wi-Fi network.
⑧ Amazon Echo will take a few minutes to try to connect
to the network.
⑨ After the network connection is successful, tap
“Continue”. An introduction video will appear，After the
video ends, tap “Continue” to jump to the Alexa Home
page.
⑩ You have now completed the Amazon Echo's
confifiguration process.
4.Common commands
Control the device via voice commands, now you can
control your smart device with Echo. You can control
your device (such as your bedroom light) with the
following commands:
Alexa, turn on/offff bedroom light. (Turn on/offff the
light)
Alexa, set bedroom light to 50 percent. (Set the light to
any brightness)
Alexa, brighten/dim bedroom light. (Increase/weaken the
brightness of the light)
3.How to manually dimmer
Plug the dimmable bulb onto the smart power Plug, and
manually “long press” the on/off button to dimmer for
brightness adjust, release your finger when when the light
intensity changes to the value you want.
When the brightness is with its maximum value under ON
state,long press the ON/OFF button to dim the lights to
the minimum value slowly, or release your finger to stop
the intensity changing.
When the brightness is not with its maximum value under
ON state, long press the ON/OFF button to lighten the
lights to the maximum value slowly.
Enter Smart Life Skill in Alexa APP
1.Complete product networking confifiguration in
the App
Complete the device's networking confifiguration
according to the prompts in the App. Note: In the App,
change the name of the device to an easily identififiable
name such as Alexa; names are usually in English, such
as “bed light”.
Voice control
App control
APP
SERVICE
RECYCLING INFORMATION
Product Information
Product Name_______________________________________
Product Type________________________________________
Purchase Date_______________________________________
Warranty Period______________________________________
Dealer Information___________________________________
Customer's Name____________________________________
Customer Phone_____________________________________
Customer Address___________________________________
____________________________________________________
Maintenance Records
Failure date Cause Of Issue Fault Content Principal
WARRANTY CARD
English
1 2 63 54 7 8
English English English English English English English
English
English
10 11 1512 1413 16 17
English English English English English English English English
18 19
9
English
20
Bitte scannen Sie den QR-Code, um das deutsche
Handbuch, das Installationsvideo und die Funktionsein-
führung zu erhalten
Escanee el código QR para obtener el manual en español,
el video de instalación y la introducción de la función
Veuillez scanner le code QR pour obtenir le manuel en
français, la vidéo d'installation et l'introduction des
fonctions
Отсканируйте QR-код, чтобы получить руководство на
русском языке, видео по установке и описание функций
Leia o código QR para obter o manual em português, o
vídeo de instalação e a introdução das funções
请扫描二维码获取中文的说
明书、安装视频及功能介绍
All products marked with the symbol for separate collection of waste electrical
and electronic equipment (WEEE Directive 2012/19 / EU)
must be disposed of separately from unsorted municipal
waste. To protect your health and the environment, this
equipment must be disposed of at designated collection points
for electrical and electronic equipment designated by the
government or local authorities.
Correct disposal and recycling will help prevent potential
negative consequences for the environment and human health.
To find out where these collection points are and how they
work, contact the installer or your local authority.
Steps for connecting the APP
to the device
Method One: Scan the QR code to configure the
network guide.
Make sure your Smart Life/Tuya Smart APP has successfully
connected to a WiFi
1.
① ②
③ ④
Method Two:
Warning:
Changes or modifications to this unit not expressly
approved by the party responsible for compliance could
void the user's authority to operate the equipment.
NOTE:
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired operation.
FCC Statement:
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15
of the FCC Rules.These limits are designed to provide
reasonable protection against harmful interference in a
residential installation.This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or
more of the following measures:
—Reorient or relocate the receiving antenna.
—lncrease the separation between the equipment and
receiver.
—Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician
for help.
The equipment complies with FCC Radiation exposure limit
set forth for uncontrolled environment.This equipment
should be installed and operated with minimum distance
20cm between the radiator and your body.
-
1
MOES WP-USD-WH-MS is a smart power plug that allows you to control your lights, fans, and other devices from anywhere using your smartphone or voice assistant. It connects to your existing Wi-Fi network and doesn't require a hub or bridge. You can use the Smart Life app to control your devices, set schedules, create scenes, and more. The smart plug is also compatible with Amazon Alexa and Google Assistant, so you can control your devices with your voice.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
MOES MS-1LW-N-110 User manual
-
MOES ZK-EU16M-WH-MS User manual
-
MOES MS-108ZR User manual
-
MOES MS-104Z User manual
-
MOES WS-Y-EUTC-WH-EN User manual
-
MOES MS-104 User manual
-
-
MOES ZP-UK16M-WH-MS User manual
-
MOES WRS-EUC-3D-BK-MS User manual
-
