2. VISUAL COMFORT
  3. KW 3612
KW 3612

VISUAL COMFORT KW 3612 User manual

  • I've reviewed the assembly instructions for the Visual Comfort Table Lamp KW 3612. This document details the process of assembling the lamp, including attaching the shade, diffuser, and harp, as well as installing the light bulb and connecting the power. I'm ready to answer any questions you might have about the lamp and the procedures described
  • What tools are needed for assembly?
    What should I do if I find any damage or defect?
    How do I clean the lamp?
Armato Small Table Lamp
Item # KW 3612
ASSEMBLY INSTRUCTIONS
This light fixture should be installed in accordance with all applicable,
local installation codes, and by a person familiar with the construction
and operation of it, as well as the hazards involved. Inspect item and
contents carefully. If any damage or defect is found, do not install.
Retain all packaging material until installation is complete and approved.
NOTICE:
TOOLS REQUIRED (NOT INCLUDED):
Scissors
1. Carefully remove all parts from the box. Place on a clean, soft surface.
2. Remove socket ring (E) from socket cup (F).
3. Install harp (D) to socket cup (F) and secure with socket ring (E).
4. Remove finial (A) from harp (D).
5. Remove shade (C) and diffuser (B) from packaging and install to
harp (D) using finial (A).
NOTE: If shade and diffuser has additional packaging, carefully cut off
from interior of shade and diffuser to avoid damages.
6. Install light bulb into the socket.
7. Remove protective cover (G) from plug.
8. Plug into electrical outlet and test the fixture.
Care Instructions: Clean only with a soft dry cloth or feather duster. Do
not use abrasive or chemical agents.
A
C
D
E
F
G
Bulb not included
Metal shade option
B
US
M
L
I
D
S
E
T
Armato Small Table Lamp
Item # KW 3612
ASSEMBLY INSTRUCTIONS
This light fixture should be installed in accordance with all applicable,
local installation codes, and by a person familiar with the construction
and operation of it, as well as the hazards involved. Inspect item and
contents carefully. If any damage or defect is found, do not install.
Retain all packaging material until installation is complete and approved.
NOTICE:
TOOLS REQUIRED (NOT INCLUDED):
Scissors
A
C
D
E
F
G
Bulb not included
Linen shade option
US
M
L
I
D
S
E
T
1. Carefully remove all parts from the box. Place on a clean, soft surface.
2. Remove socket ring (E) from socket cup (F).
3. Install harp (D) to socket cup (F) and secure with socket ring (E).
4. Remove finial (A) from harp (D).
5. Remove shade (C) from packaging and install to harp (D) using
finial (A).
NOTE: If shade has additional packaging, carefully cut off from interior
of shade to avoid damages.
6. Install light bulb into the socket.
7. Remove protective cover (G) from plug.
8. Plug into electrical outlet and test the fixture.
Care Instructions: Clean only with a soft dry cloth or feather duster. Do
not use abrasive or chemical agents.
/