2. VISUAL COMFORT
  3. RL 3493

VISUAL COMFORT RL 3493 User manual

  • I have reviewed the user manual for the RALPH LAUREN Riley Medium Table Lamp model RL 3493. The document provides detailed steps for assembling the lamp, including installing the harp, attaching the shade, adding the diffuser and installing light bulb. I'm ready to answer your questions about the product and the assembly procedure.
  • What tools are required for assembly?
    What should I inspect before assembly?
    What is the correct way to clean the lamp?
Riley Medium Table Lamp
Item # RL 3493
ASSEMBLY INSTRUCTIONS
This light fixture should be installed in accordance with all applicable,
local installation codes, and by a person familiar with the construction
and operation of it, as well as the hazards involved. Inspect item and
contents carefully. If any damage or defect is found, do not install.
Retain all packaging material until installation is complete and approved.
1. Carefully remove all parts from the box. Place on a clean, soft surface.
2. Install harp (C) to saddle (E), adjust to desired height, then tighten
adjustment knobs (D).
3. Remove finial (A) from harp (C).
4. Remove shade (B) from packaging and attach to harp (C) using
finial (A).
NOTE: If shade has additional packaging, carefully cut off from
interior of shade to avoid damages.
5. Place diffuser (G) onto top of shade (B).
6. Install light bulb into the socket.
7. Remove protective cover (F) from the plug.
8. Plug into electrical outlet and test fixture.
Care Instructions: Clean only with a soft dry cloth or feather duster. Do
not use abrasive or chemical agents.
NOTICE:
TOOLS REQUIRED (NOT INCLUDED):
Scissors
B (Packaged separately)
A
D
E
F
C
G
Bulb not included
US
M
L
I
D
S
E
T
LED
/