VISUAL COMFORT KW3932 User manual

Type
User manual
Onda Medium Table Lamp
Item # KW3932
ASSEMBLY INSTRUCTIONS
This light fixture should be installed in accordance with all applicable,
local installation codes, and by a person familiar with the construction
and operation of it, as well as the hazards involved. Inspect item and
contents carefully. If any damage or defect is found, do not install.
Retain all packaging material until installation is complete and approved.
NOTICE:
A
B
D
F
E
Bulb not included
C (Packaged separately) TOOLS REQUIRED (NOT INCLUDED):
Scissors
1. Carefully remove all parts from the box. Place on a clean, soft surface.
2. Install harp (D) by squeezing together and inserting into the top of
saddle (E).
3. Remove finial (B) from harp (D).
4. Remove shade (C) from packaging and install to harp (D) using
finial (B).
NOTE: If shade has additional packaging, carefully cut off from
interior of shade to avoid damages.
5. Install light bulb into the socket.
6. Place diffuser (A) on the top of shade (C).
7. Remove protective cover (F) from plug.
8. Plug into electrical outlet and test the fixture.
Care Instructions: Clean only with a soft dry cloth or feather duster. Do
not use abrasive or chemical agents.
US
M
L
I
D
S
E
T
LED
Onda Medium Table Lamp
Item # KW3932
UNPACKING NOTICE
Please follow instructions below to avoid possible damages caused by
improper removal.
NOTICE:
1. Open box and remove top layer of packaging.
2. Carefully lift body by fabric handles while supporting other end of body
until clear of packaging. Place upright on a clean, soft surface.
  • Page 1 1
  • Page 2 2

VISUAL COMFORT KW3932 User manual

Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI