Mircom LT-6165-CCH-5014-PANELKIT Installation guide

Mircom
Brand
Mircom
Model
LT-6165-CCH-5014-PANELKIT
Type
Installation guide
1 LT-6165 Rev 1
CCH-5014-PANELKIT Installation
Instructions
1. Contents of the Kit
Name Quantity Picture Description
CH-509 1
Backplate for 6 modules
Attach to backbox with 4 HD-212 nuts
BK-368 12
Medium “Z” Bracket 4 ½” used for mounting
display adders FDX-008(W)(KI), IPS-2424DS,
QAZT-5302DS and RAX-1048TZDS
Attach to backplate with 24 HD-050 nuts
BK-369 2
Small “Z” Bracket 3 ¾” used for mounting
RAX-LCD and RAXN-LCD annunciators if
more display frames are required
Attach to backplate with 4 HD-050 nuts
CH-502B 3
2-window deadfront used for mounting display
adders FDX-008(W)(KI), IPS-2424DS, QAZT-
5302DS and RAX-1048TZDS
Comes with 4 x CH-536B deadfront covers
attached with 16 screws
Attach to backbox with 2 HD-024 metal
screws and 2 HD-304 washers
CH-443B 1
2-window deadfront used for the QMP-5101B,
QMP-5101N, QMT-5302 and QMT-5302N
Comes with 2 x CH-436B blank plates
attached with 4 nuts
Attach to backbox with 2 HD-024 metal
screws and 2 HD-304 washers
CH-1008B 1
4-window deadfront used for mounting display
adders FDX-008(W)(KI), IPS-2424DS, QAZT-
5302DS and RAX-1048TZDS
Attach to backbox with 4 HD-024 metal
screws and 4 HD-304 washers
HD-024 14
Metal screw
For fastening CH-502B, CH-443B, CH-1008B
deadfronts to backbox (12), and extra (2)
LT-6165 Rev 1 2
HD-304 14
Washer
For fastening CH-502B, CH-443B, CH-1008B
deadfronts to backbox (12) and extra (2)
HD-212 6
Nut, #8-32
For fastening backplate to backbox (4) and
extra (2)
HD-050 64
Nut, #6-32
For fastening brackets to backplate (28),
modules to brackets (28), and extra (8)
HD-226 8
Spring nut
For closing deadfronts
MD-575 1
Cable extender, 26-pin ribbon
MD-687 8
34-pin ribbon cable, 12”
Name Quantity Picture Description
24.0”
12.0”
3 LT-6165 Rev 1
2. Attach the Backplate
CH-455 Backplate
4 x HD-212 nuts
LT-6165 Rev 1 4
3. Attach Brackets
Bracket
4 x HD-050
nuts
Install brackets pointing out
5 LT-6165 Rev 1
4. Mount Annunciators
5. Attach Deadfronts
4 x HD-050 nuts
RAX-1048TZDS
2 x BK-368
2 x HD-304 washers
2 x HD-024 screws
CH-443 deadfront
Slide HD-226 spring
nut on to side rail
aligned with the screw
on the deadfront
LT-6165 Rev 1 6
Example Setup
CH-443B
CH-502B
CH-502B
Cutout to
mount audio
module
Cutout to
mount audio
module
Cutout to mount
display/audio
module
Cutout to mount
display/audio
module
Cutout to mount
display/audio
module
Cutout to mount
display/audio
module
CH-502B
Cutout to mount
display/audio
module
Cutout to mount
display/audio
module
CH-1008B
Cutout to mount
display/audio
module
Cutout to mount
display/audio
module
Cutout to mount
display/audio
module
Cutout to mount
display/audio
module
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6

Mircom LT-6165-CCH-5014-PANELKIT Installation guide

Mircom
Brand
Mircom
Model
LT-6165-CCH-5014-PANELKIT
Type
Installation guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents