Mircom LT-6162-CCH-5008-ANNUNKIT Installation guide

Mircom
Brand
Mircom
Model
LT-6162-CCH-5008-ANNUNKIT
Type
Installation guide
1 LT-6162 Rev 1
CCH-5008-ANNUNKIT Installation
Instructions
1. Contents of the Kit
Name Quantity Picture Description
CH-455 1
Backplate for 8 modules
Attach to backbox with 4 HD-212 nuts
BK-368 12
Medium “Z” Bracket 4 ½” used for mounting
display adders FDX-008(W)(KI), IPS-2424DS,
QAZT-5302DS and RAX-1048TZDS
Attach to backplate with 24 HD-050 nuts
BK-369 2
Small “Z” Bracket 3 ¾” used for mounting
RAX-LCD and RAXN-LCD annunciators if
more display frames are required
Attach to backplate with 4 HD-050 nuts
CH-503B 1
2-window deadfront used for RAX-LCD and
RAXN-LCD Annunciators
Attach to backbox with 2 HD-024 metal
screws and 2 HD-304 washers
CH-502B 3
2-window deadfront used for mounting display
adders FDX-008(W)(KI), IPS-2424DS, QAZT-
5302DS and RAX-1048TZDS
Comes with 4 x CH-536B deadfront covers
attached with 16 screws
Attach to backbox with 2 HD-024 metal
screws and 2 HD-304 washers
CH-443B 1
2-window deadfront used for the QMP-5101B,
QMP-5101N, QMT-5302 and QMT-5302N
Comes with 2 x CH-436B blank plates
attached with 4 nuts
Attach to backbox with 2 HD-024 metal
screws and 2 HD-304 washers
HD-024 10
Metal screw
For fastening CH-503B, CH-502B, CH-443B
deadfronts to backbox (8), and extra (2)
LT-6162 Rev 1 2
HD-304 10
Washer
For fastening CH-503B, CH-502B, CH-443B
deadfronts to backbox (8) and extra (2)
HD-212 5
Nut, #8-32
For fastening backplate to backbox (4) and
extra (1)
HD-050 54
Nut, #6-32
For fastening brackets to backplate (24),
modules to brackets (24), and extra (6)
HD-226 5
Spring nut
For closing deadfronts
MD-575 2
Cable extender, 26-pin ribbon
MD-687 6
34-pin ribbon cable, 12”
Name Quantity Picture Description
24.0”
12.0”
3 LT-6162 Rev 1
2. Attach the Backplate
3. Attach Brackets
CH-455 Backplate
4 x HD-212 nuts
Bracket
4 x HD-050
nuts
Install brackets pointing out
LT-6162 Rev 1 4
4. Mount Annunciators
5. Attach Deadfronts
4 x HD-050 nuts
RAXN-LCD
2 x BK-369
2 x HD-304 washers
2 x HD-024 screws
CH-443 deadfront
Slide HD-226 spring
nut on to side rail
aligned with the screw
on the deadfront
5 LT-6162 Rev 1
Example Setup
CH-443
CH-502
CH-502
CH-503
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5

Mircom LT-6162-CCH-5008-ANNUNKIT Installation guide

Mircom
Brand
Mircom
Model
LT-6162-CCH-5008-ANNUNKIT
Type
Installation guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents