Swann SW-A-LCD8 User manual

Brand: Swann

Model: SW-A-LCD8

Category: Portable TVs

Type: User manual

This manual is also suitable for

SW248-8LM

User Manual

SW248-8LM

SW-A-LCD8

T able of Contents

1.Precautions

2.Accessories

3.Appearance

4.Remote Controll operation

5.Basic Operation Methods

6.Menu Operation

6.1 Picture

6.2 Option

6.3 Clock

6.4

6.5 Preset

System

7.Before you request repairs

8.Technical Parameters

1. Precautions

Storage and Keeping

Maintenance

Please disconnect all wires before you start cleaning this machine.

Ensure monitor is

not stored or

operated in

temperatures

exceeding set

limits.

Storage: 20 ~ 60

Operating: 0 ~40

Never use this

monitor near

bathtubs,

washbasins,

kitchens etc......, or

places with open

water (swimming

pool etc...), damp

basements or

similar places.

Never operate

the monitor in

environments

with large

amounts of

moisture, dust,

or oil smole.

Never place

monitor in

containers with

other loose

objects. Doing

so can damage

the monitor due

due to collision.

A v o i d dropping

or impacting the

monitor.

Never use sharp

objects on or

around the

monitor.

P l e as e w i pe

the monitor cover,

display screen,

and buttons with

soft cloth dipped

witha light

detergent

solution.

Never wipe this

monitor with

abrasive cloths,

strong detergent

powder, alchol,

benzene etc...,

various

propellants or

chemical cleaning

solutions.

-1-

Alcohol

Special Notice

1. Only the included AC adapter and the automobile adapter (12V) are to

be used.

2. For the sake of safety, when you do not intend to use the display, please

un-plug the AC adapter or automobile adapter.

Earphone Operation Precautions

1. Please do not have your headphone / earphone to too high volume,

otherwise it may lead to inconvenience or danger to yourself and

other People.

2. When using open-designed earphone, please keep the volume down

to a reasonable level for the confort of those around you.

3. If you begin to display systoms of tinnitus, immidiately tune down the

volume or stop using this monitor.

4. Extended use of headphones / earphone is not recommanded. Doing

so can result in hearing damage.

A few highlights or dark spots may occur on the LCD screen, it is a very

common phenomenon to the active matrix, display technology, and

does not necessarily mean there is a defect or fault. Never try to open

this monitor yourself. In case of any fault or failure, please turn o the

display at once, and notify our company or the corresponding dealer.

This display is made up of many precise electronic components. Any

disassembly or modication may lead to damage to broken components.

-2-

! WARNING !

2 . Accessories

Base support

AC adapter

Earphone

Double-side adhesive

tape for base support

Car adapter

-3-

Remote Control

AV Signal Cable

3. Appearance

Channel +/selection

Power ON/OFF

Power indicator

Channel - /selection

Volume-/ selection -

Volume +/ selection+

TFT-LCD screen

Remote receiving

window

AV / TV Shift

Loudspeaker

-4-

(TV Tuner Optional)

4. Remote Controller Operation

Mute

Channel Selection

Timer

Channel keys

Channel Shift

Horizontal

Power ON/OFF

Exit Game

Call

Return

Language

Calendar

AV / TV Shift

Vertical

Caution

1. Please align the remote control with the infrared-receiving

window on monitor in operation.

Never mishandle, drop, saturate, or disassemble the remote

control.

3.Never press any button continuously and swiftly. Operation interval is at

least 2 seconds.

4.Press Power to turn on the machine before pressing CH+, Ch-

for channel selection. (TV Tuner Optional)

Channel keys (digit keys 0-9 and -/--): there are 0~255 in total of 256

channels available on the remote control for your option by the 11 buttons

of 0-9 and -/-- on the remote control. when the channel is a one-digit gure,

just press the corresponding digit key. If the channel is a two-digit gure, you

should press -/-- rst to show -- on the display screen before further pressing

the corresponding digit keys. (TV Tuner Optional)

-5-

(TV Tuner Optional)

Volume Adjust

Display Mode

CH /

Press C H , the number of T V c hannel increases.

Press C H , the number of T V c hannel decreases.

VO L - / + (Volume adjust)

Press VO L - , th e volume of TV se t decreases.

Press V OL + , the volume of TV se t increases.

M OD E ( M ode):

By pressing this button, users can alternate between ve picture modes

of Standard, Soft, Vivid, Light and Personal.

POW ER (P ower switch):

Press this button is to turn o the monitor, Press it again is to turn on

the machine. Press this button in game status is to exi t game.

M EN U( M enu button):P(ress this button to display the following ve

submenu s: PICTURE, OPTION, CLOCK , SYSTEM and PRESET.

M UT E ( M ute):

Press this button to mute sound competely, press it again or VOL+ / VOL-

to resume normal sound.

CA LL ( Call) :

Press this button to display the character of program currently

watching.

TI M ER :

Time se tup of sleep o, i t is used to set the time off within 120 minutes.

LA NG :

Press this button to switch between eight languages of English, Russian,

Chinese, Italian, Spanish, Portuguese, German and Arabic.

CA LE :

Press this button to show Year, Month, Day and Week. Press CH- / CH+ to

adjust the Year, press VOL- / VOL+ to adjust the Month.

(AV / TV shift):

TV Tuner optional for this model.

Press this button to switch between AV the input channel and TV channels.

Press this button can return to previous channel, press it again

returns

current channel.

: Press this button to ip the picture horizontally, press is again to

resume image.

: Press this button to ip the picture vertically, press it again to resume

image.

-6-

(Channel Selection): TV Tuner optional for this model.

(Return): TV Tuner optional for this model.

AV:

5. Basic Operation Methods

Basic interface connection

5.1 Installation Method of Base Support:

Align the screw bolts of base support with

the hardware pieces on bottom rear of the

monitor cover, rotate in clockwise direction

till the monitor is xed on the support.

5.2 Connection Method of Power Supply:

Align the power plug of the AC adapter

with the socket jack marked with DC 12V

on the machine cover.

5.3 Connection Method of External

Antenna Conversion Line:

Align one end of the attached antenna

cord with the antenna jack on monitor

and connect the other end with the plug

of the external antenna.

-7-

(TV Tuner optional for this model)

(TV Tuner Optional

for this model)

5.4 Connection Method of Earphone:

Align the earphone plug with the earphone

jack on the monitor, and just push in.

Caution

If earphone is used, the sound only transmit through the earphone, no

sound will ouput from the monitor.

Caution

5.5 Connection

Method of AV Input:

Insert the AV Signal Cable into

the AV Input Sockets, then plug

in your camera video signal into

the AV Signal Cable.

Basic operation methods of TV set:

1. Connect with power supply and turn

on the power switch.

2. Pull out telescopic antenna.

3. Press Channel Selection to choose the desired channel.

4. Tune the TV signal and adjust the sound volume of the TV.

Volume

decreases

Power ON/OFF

Change in the

order of 3, 2, 1,

Change in the

order of 1, 2, 3,

Volume

increases

AV / TV Shift

Remote

receiving

window

Power

indicator

-8-

(TV Tuner optional for this model)

6. Menu Operation

Press MENU to display options as follows:

PICTURE

SYSTEM

OPTION

CLOCK

PRESET

Picture

Contrast

Bright

Color

Sharp

CH / CH Select VOL + / VOL - : Adjust

6.1 Picture

Contrast, Bright, Color, Sharp and TINT displays on the screen

as illustrated below:

Press CH+ or CH- to select the item contrast. Press VOL+ or VOL- to adjust

analog quantity of Contrast. Press CH+ or CH- in turn to select Bright, Color

and Sharp, and can also adjust the analog quantity of Bright, Color and Sharp.

The TINT option will only be displayed when the TV is in NTSC

mode.

6.2 Option

Language,Calendar and Game displays on the screen as illustrated

below:

Press CH- or CH+ to select Language:

Select

Adjust

Option

Language

Calendar

Game

English

Select

Adjust

Note:

CH / CH Select VOL + / VOL - : Adjust

-9-

Then press VOL- or VOL+ to select a language between English,

German, French, Spanish, Italian, and Russian.

Press CH- or CH+ to select the item Game, press VOL- or VOL+ to enter

Game.

Press VOL+ to move right, VOL- to move left, CH- to move down, CH+ to

rotate, press Power to exit the game.

CLOCK

Time

On-time

O-time

CH-time

Attention

Position

Time,On-time,O-time,Attention,CH-time and Position displays on

the screen illustrated as blow:

6.3 C L O C K

- - : - -

Select

Adjust

VOL-Adjust hour VOL+ Adjust minute CH- / CH+ Select items to

be setup Press VOL-/VOL+ to set up clock, then press CH- / CH+

to choose ON Time.

-10-

Notes:

Before adjusting other items, time must be set first. And setup On

Time for all items is 24 hours at the most.

Press VOL-/VOL+ setup ON Time, press CH-/CH+ to choose CH- Time.

Upon setup, press CH-/CH+ again to choose Position, and press

VOL-/VOL+ to adjust till the channel number of desired program, and

then you can save your desired program*

Press VOL- or VOL+ adjust calendar, then press CH- / CH+ adjust year,

press VOL- / VOL+ adjust month.

Press CH- or CH+ to select the item Calendar.

Color System, Sound System, Blue back,Horizontal, and Vertical

displays on the screen as illustrated below:

6.4 System

System

Color System

Sound System

Vertical

Horizontal

AUTO

6.5M

Select

Adjust

Blue back ON

-11-

Notes: 1. Notes on Sound System: 5.5M means B/G, 6.0M stands for

I, and 6.5M is D/K(L), please set the Sound System at local

one.

2. In case with picture while without sound or with noise,

please check the Sound System for correct setup rst.

Press CH - /CH + to select Color system:

Then press VOL- or VOL+ to revolve the screen in the order of

PAL , NTSC or PAL, SECAM. Please choose carefully this system

correctly. Otherwise, it may cause visual errors or inferior color.

CH- / CH+ to select, VOL + / VOL - to Adjust

Then press VOL+, the Sound System displays in the order of DK, I, BG, L.

Press CH- or CH+ to select the item Blue back:

CH- / CH+ to Select, VOL + / VOL - to Adjust

Press CH- or CH+ to select the item Horizontal:

Press VOL - / VOL + can realize horizontal ip, press again to resume

the picture.

Press CH- or CH+ to select the item Vertical:

Press VOL - / VOL + can realize vertical ip, press again to resume

the picture.

Position, Remember, Band, Swap, Fine, Search, and Auto Search

will display on the screen as illustrated below:

6.5 Preset

-12-

Press CH- / CH+ to select Remember.

Preset

Position

Remember

Band

Swap

Fine

Auto search

V-L

Select

Adjust

Press VOL- or VOL+ to choose ON under the item Remember, it then

displays this channel upon changing program. In O, it doesn't display the

Channel Number.

Press CH - / CH + to select Auto Search:

( TV Tuner optional for this model)

Preset

Position

Remember

Band

Swap

Fine

Auto search

V-L

Select

Adjust

Press VOL- or VOL+ to start Auto Search, and put into automatic

memory and storage upon completion of Auto Search. Choose

channel in order of V-L→V-H→UHF, and return to Program No. 0

upon completion.

-13-

7. Before you request repairs

Issues below do not necessarily mean a failure of the monitor.

Please try the following solutions before you request a repair.

Phenomena

Possible Causes

No picture, no sound

No image

No sound

Dark picture

Achromatic or

ashing color

Upside down or

lateral inverted

picture

Improper connection with AC adapter or car

adapter. Use of unauthorized power supply.

Power Switch is on OFF position.

Check the correct Channel is selected.

Automatically set up the Receiving

Channel again. Any new location is

subject to re-setup of channels.

Ensure the sound is turned up and the

Sound System is correct. Check the

earphone plugged in. Whether ERASE

functions under too weak signal.

Whether brightness and contrast adjusted

correctly; Whether environment

temperature too low.

Whether color adjusted well, possible error in

color settings, poor signal strength.

Improperly adjusted Horizontal or Vertical

in the remote control.

-14-

8. T echnical Parameters

Product Name: LCD Color monitor

Display Device: Color TFT -LCD

Sound System: DK; I; BG; L; M

Screen Size: 8 inches

Audio Output: 0.3W (Max)

Loudspeaker: two 32mm round loud speakers

Connecting T erminal: Earphone jack, Audio / Video (AV) input jack,

External power supply jack.

Applicable Power Supply: Two options:

1.AC Power supply AC adapter

2.Automobile storage battery (12V) Automobile adapter

Power Consumption: about 10W

Outer Dimension: W 222mm H 172mm T 41mm

Weight: about 765g

Resolution: 1440 (H) 468 (V)

Response Speed (ms): R: 10 / F:20

Visible Angle: U: 40 / D: 60 R / L : 60

Brightness: 300cd/m

Contrast: 350:1

-15-

Warning

This operation instruction is only intended for reference. No further notice

is available to any modication of all information contained therein. Due to

continuing improvements, the features and design are subject to change

without notice.

No repairable components exist in the machine. Do not try to

dismantle or alter the monitor, the high voltage in the monitor

may result in injury or death. Maintenance and adjustment of the

monitor is subject to professionals only.

Notes

Swann SW-A-LCD8 User manual

Brand: Swann

Model: SW-A-LCD8

Category: Portable TVs

Type: User manual

This manual is also suitable for

SW248-8LM

Download PDF

report

Swann SW-A-LCD8 User manual

This manual is also suitable for

Swann SW-A-LCD8 User manual

Other documents