DEAR CUSTOMER
Congratulations for your purchase!
Please read this manual carefully, and keep it for future reference.
If you need extra support, please write to [email protected]
INSTRUCTION MANUAL
ROOF MOUNT LCD COLOR TV RECEIVER
TV-1836TFT
This unit may be submitted to changes in specifications, characteristics and/or operation without prior
notice to the user, in order to continue improving and developing its technology.
NOTE
CAUTION
RISK OF ELECTRIC
SHOCK, DO NOT
OPEN
PREMIER CUSTOMER SERVICE
Venezuela:
0800 ELECTRIC (353-2874)
Colombia:
01-900-331-PEJC (7352)
Panama:
300-5185
Website
www.premiermundo.com
E-mail:
Caution: To reduce the risk of electric shock do not open
this device, there are not serviceable parts for customers.
Please refer any maintenance or repair to qualified
personnel.
This sign means the existence of dangerous voltage at
the inside of the unit, which states a risk of electric shock.
This sign means that there are important instructions of
operation and handling in the manual that comes with this
Device.
Page 1
1.Precautions
2.Accessories
3.Appearance
4.Remote Controller Operation
5.Basic Installation Methods
6.Basic Operation Methods
7.Menu Operation
7.1 Picture
7.2 Option
7.3 Clock
7.4 System
7.5 Preset
8.Before you request for repair
9.Technical Parameters
3
4
5
6
8
8
11
11
11
13
13
16
18
19
Table of Contents
Page 2
1. Precautions
Storage and Keeping
Maintenance
Please plug off all connection wires before you start cleaning this machine.
Keep this machine
away from too hot
or too cold places.
The storage
temperature of this
machine is
20~60 , the
application
temperature of this
machine is 0~40 .
Never use this
machine near
bathtub,
washbasin, and
kitchen, etc places
with water or at
damp basement,
swimming pool or
similar places.
Never make
the TV set
under effect
of moisture,
dust or oil
smoke etc.
environment.
Avoid this
machine from
dropping or
impacting.
Never
extrude or
chafe this
machine with
sharp objects.
Never put this
machine within
certain box at
your will or
place it at too-
oscillating
place and under
further severe
collision.
Please wipe
the machine
cover, display
screen and
buttons with
soft cloth
dipped with
little soft
abluent.
Never wipe this
machine with
abrasion cloth,
abstergent powder,
alcohol and
benzene etc.
various
propellants or
chemical cleaning
media.
Alcohol
Page 3
!
Warning!
1. For the sake of safety for yourself and others, please don't watch
or turn on the TV set during driving.
2. It is very dangerous to watch or operate TV while driving.
Special Notice
!
A few highlights or dark spots may occur on the LCD screen. It is a
very common phenomenon to the active matrix display technology,
and never necessary means any defects or faults. Never try to repair
this machine by yourself. In case of any fault or failure, please turn
off the display at once, and notify the corresponding dealer. The
display is made up of many precision electronic components. Any
disassembly or modification may lead to damage or broken.
Operation Precautions
1.Only the attached automobile adapter (12V) is applicable.
2.For the sake of safety, when you are not intended to use the display,
please plug off the automobile adapter.
2. Accessories
Automobile
power supply
adapter
Screws,
iron piece
Remote
controller
AV, power
supply
conversion
line
Page 4
TV-
183
6TFT
3. Appearance
Loudspeaker
Volume increases, analog
quantity selection +
Volume decreases, analog
quantity selection -
Channel decreases, option
selection
Channel increases, option
selection
AV / TV Shift
Menu
TFT-LCD screen
Remote receiving
window
Roof Mount
switch
Power indicator
Standby switch
power on/off
Audio / Video / +12V
power supply / antenna /
car-backing end jack
Lamp switch
Antenna box
Roof mount Switch: Press the Roof mount Switch one time is to
separate the TV set from the top cover. When you finish watching TV,
please press the TV set toward automobile ceiling one time with force
to fix the TV set onto the TV top cover on the automobile ceiling.
Lamp Switch: The lamp distinguishes on 0 and lights on 1 .
Page 5
4. Remote Controller Operation
Caution
!
1) Please align the remote controller with the infrared-receiving
window on TV set in operation.
2) Never oppress, drop, wet or disassembly the remote controller.
3) Never press any button continuously and swiftly. Operation
interval is at least 3 seconds.
4) Press Power to turn on the machine before pressing CH+, CH- for
channel selection.
Channel keys (digit key (0-9) and - / - - ): There are 0 ~ 255 in total of
256channels available on the remote controller for your option by the
11buttons of 0-9 and - / - - on the remote controller. When the channel
is a one-digit figure, just press the corresponding digit button. If the
channel is a two-digit figure, you should press - / - - first to show - -
on the display screen before further pressing the corresponding digit
buttons.
Page 6
Power Switch
Exit Game
Call
Timer
Language
Menu
Calendar
AV / TV Shift
Auto Search
Channel Selection
Volume Adjust
Mute
Pict
Channel keys
Return
Horizontal
Channel Shift
LCD display mode
Vertical
TV-1836TFT
CH / (Channel selection)
Press CH , the number of TV channel increases.
Press CH , the number of TV channel decreases.
VOL - / + (Volume adjust)
Press VOL - , the volume of TV set decreases.
Press VOL + , the volume of TV set increases.
PICT (Mode):
By pressing this button, users can realize the five picture statuses of
Personal,Standard, Soft, Vivid and light.
POWER (Power switch):
Press this button is to turn off the TV set, press it again is to turn on
the machine. Press this button in game status is to exit game.
MUTE (Mute):
Press this button, sound disappears, press it again or VOL+/ VOL- is
to resume normal sound.
CALL (Call):
Press this button is to display the character of program currently
watching.
TIMER:
Time setup of sleep off,it is used to set the time off within 120 minutes.
CALE:
Press this button is to show Year, Month, Day and Week. Press CH - /
CH + is to adjust the Year, press VOL - / VOL + is to adjust the Month.
AV(AV / TV shift):
Press this button is to realize switch between AV and TV pictures.
AUTO: Press and hold this button for 5 seconds can realize automatic
channel search.
(Return) :
Press this button can return to previous channel, press it again return
to current channel.
: Picture Mode: Two screen modes in the zoom mode : 4:3,16:9.
LANG:
Press this button can realize the switch of English, German, French,
Spanish, Portuguese, Italian, Dutch, Russian, Chinese and Japanese
OSD menu language.
: Press this button to flip the picture horizontally, and press it
again to resume image.
: Press this button to flip the picture vertically, and press it again
to resume image.
Page 7
5. Basic Installation Methods
(1) Fix the iron piece onto the
TV top cover with attached
screws as per illustration.
(2) Perform connection as per
car-backing rearview
diagram.
(3) Fix the TV top cover onto
the automobile ceiling with
attached screws.
6. Basic Operation Methods
Basic Interface Connection
(1) Connection Method of External Antenna Conversion Line:
Just insert the output end of automobile antenna into the
jack for six-core AV conversion line on TV set.
Page 8
(3)Wire Diagram for Car-backing Rearview System:
Notes: The TV system locks automatically on Av2 when backing the car
and resumes original status upon completion.
Car-backing camera head
Red video line 2
Yellow White Black
Black
Connect with the positive
power supply of reversing
light, the display turns on
automatically during
backing and locks on
VIDEO 2 to display the
backing picture.
VCD.DVD
VIDEO1
Automobile
Antenna
Blue
VCD
AUDIO
IN
DC
12V
VCC
Mect skill
set input
port
(2)Connection Method of AV Conversion Line:
Hold the AV conversion line, align the side marked with on the plug of
conversion line with the side marked with on the plug of AV conversion
line of TV set, and just insert.
1. Yellow line is for VIDEO 1 IN.
2. Red line is for VIDEO 2 IN.
3. White line is for AUDIO IN.
4. In-socket 12V power supply IN
5. Blue line is for AUDIO output.
6. Black single line is for car backing.
.
Page 9
DC+ --12V/1200mA
Basic TV set operation methods
(1) Connect with power supply and turn on power switch.
(2) Pull out telescopic antenna.
(3) Press Channel Selection to choose the desired channel.
(4) Adjust the sound volume of the TV signal.
AV / TV Shift
Menu
Volume
decreases
Volume
increases
Power indicator
Power ON/OFF
Remote controller
receiving window
Change in order
of 3, 2, 1,
Change in order
of 1, 2, 3,
Page 10
CH / CH Select VOL + / VOL - : Adjust
7. Menu Operation
Press MENU to display options as follows:
PICTURE OPTION CLOCK
SYSTEM PRESET
7.1. Picture
Contrast, bright, color, Sharp and TINT displays on the screen as
illustrated below:
Press CH+ or CH- to select the item Contrast. Press VOL+ or VOL- to
adjust the analog quantity of Contrast. Press CH+ or CH- in turn to select
Bright, Color and Sharp, and can also adjust the analog quantity of
Bright, Color and Sharp.
Only when displaying the picture of NTSC system, it will show the
character of TINT in the Picture menu.
Notice
7.2.Option
Language and Calendar displays on the screen as illustrated below:
Press CH-/CH+ to select the item Language:
CH / CH Select VOL + / VOL - : Adjust
Option
Language English
Calendar
Game
Select Adjust
Picture
Contrast
Bright
Color
Sharp
80
80
60
50
Select Adjust
80
Page 11
Press CH+ or CH- to select the item Calendar:
Press VOL-/VOL+ adjust calendar, then press CH+/CH- adjust year,
and press VOL-/VOL+ adjust month.
CH / CH Select VOL + / VOL - : Adjust
Press VOL - / VOL + can realize selection of English, German, French,
Spanish, Portuguese, Italian, Dutch, Russian, Chinese and Japanese OSD
menu language.
Option
Language English
Calendar
Game
Select Adjust
Press CH+ or CH- to select the item Game:
Press VOL-/VOL+ then game begins, then press VOL- to move leftward,
VOL+ to rightward, CH- to quick down and CH+ to rotate the game by
360 degrees. Press POWER to exit game and resume to TV or VIDEO status.
CH / CH Select VOL + / VOL - : Adjust
Option
Language English
Calendar
Game
Select Adjust
When play games under weak or no signal, the game bar will twist slightly.
It is recommended to switch to video status before play the game again.
Notice
Page 12
7.3. Clock
Time, ON Time, OFF Time, Attention, Besp oke Time, and Position will display
on the screen as illustrated below:
VOL-Adjust hour VOL+ Adjust minute CH- / CH+ Select items to be setup
Press VOL-/VOL+ to set up Time, then press CH- / CH+ to choose ON
Time, OFF Time, Attention , and Bespoke Time, press VOL-/VOL+ to adjust
time. Upon Bespoke Time be setup, press CH-/CH+ again to choose
Position, and press VOL-/VOL+ to adjust till the channel number of desired
program, and then you can preserve your desired program
Clock
Time - - : - -
ON Time - - : - -
OFF Time - - : - -
Attention - - : - -
Bespoke Time - - : - -
Position -
Before adjust other items, Time must be set first. And setup On Time for all
items is 24 hours at the most.
Notice
7.4. System
Color System, Sound System, Blue back,Horizontal, Vertical and Zoom
displays on the screen as illustrated below:
Press CH- or CH+ to select the item Color system:
Page 13
CH / CH Select VOL + / VOL - : Adjust
Then press VOL- or VOL+ to revolve the screen in the order of AUTO,
PAL , NTSC and SECAM. Please choose carefully this system correctly.
Otherwise, it may cause achromatic or inferior color.
It is recommend to select on AUTO position.
System
Color system AUTO
Sound system DK 6.5M
Blue back ON
Horizontal
Vertical
Zoom 16:9
System
Color system AUTO
Sound system DK 6.5M
Blue back ON
Horizontal
Vertical
Zoom 16:9
Press CH- or CH+ to select the item Sound system:
Then press VOL+, the Sound System displays in the order of BG 5.5M,
I 6.0 M, DK 6.5M, L 6.5M.
Notice
Please set the Sound System at local one. In case with picture while without
sound or with noise, please check the Sound System for correct setup first.
CH / CH Select VOL + / VOL - : Adjust
Page 14
Press CH- or CH+ to select the item Blue back:
CH / CH Select VOL + / VOL - : Adjust
To set on or off of the Blue back by pressing VOL-/VOL+ key under no signal.
System
Color system AUTO
Sound system DK 6.5M
Blue back ON
Horizontal
Vertical
Zoom 16:9
CH / CH Select VOL + / VOL - : Adjust
CH / CH Select VOL + / VOL - : Adjust
Press CH-or CH+ to select the item Horizontal:
Press VOL - / VOL + can realize horizontal , press again to resume the picture.
Press CH- or CH+ to select the item Vertical:
Press VOL - / VOL + can realize vertical flip, press again to resume the picture.
System
Color system AUTO
Sound system DK 6.5M
Blue back ON
Horizontal
Vertical
Zoom 16:9
System
Color system AUTO
Sound system DK 6.5M
Blue back ON
Horizontal
Vertical
Zoom 16:9
Page 15
CH / CH Select VOL + / VOL - : Adjust
Press CH-or CH+ to select the item Zoom:
Press VOL - / VOL + can choice LCD screen display mode:
16:9 mode and 4:3 mode.
7.5. Preset
Position, Remember, Band, Swap, Fine, Search, and Auto Search will
display on the screen as illustrated below:
Press CH- or CH+ to choose the item Remember:
CH / CH Select VOL + / VOL - : Adjust
Press VOL- or VOL+ to choose ON under the item Remember, it then
displays this channel upon changing program. In Off, it doesn't display the
Channel Number.
System
Color system AUTO
Sound system DK 6.5M
Blue back ON
Horizontal
Vertical
Zoom 16:9
Preset
Position 1
Remember ON
Band V-L
Swap 1
Fine
Search
Auto Search
Page 16
CH / CH Select VOL + / VOL - : Adjust
Press VOL- or VOL+ to start Auto Search, and put into automatic
memory and storage upon completion of Auto Search. Choose channel in
order of V-L V-H UHF, and return to Program No. 0 upon completion.
Notice
1.Auto Search Start from Program No. 0.
2.When receive signal under Search, the Program Indication Bar should
turn from red into green, which means the optimum position for signal
storage. If channel under weak signal is received, the channel storage
system will automatically identify it as no signal.
Press CH- or CH+ to select the item Auto Search:
Position 1
Remember ON
Band V-L
Swap 1
Fine
Search
Auto Search
Preset
Page 17
8. Before you request for repair
Phenomena below are not necessary mean failure with TV set. Please check
off per following methods before you request for repair.
Phenomena
Possible Causes
No picture, no sound
Improper connection with automobile adapter.
Use of unauthorized power supply. Power Switch
is on OFF position.
No image
Whether the correct Channel selected.
Automatically set up the Receiving Channel
again. Any new place is subject to re-setup of
channels.
No sound
Whether the sound is turned to the end or the
Sound System is incorrect. Whether earphone
plugged in. Whether ERASE functions under
too weak signal.
Dark picture
Whether brightness and contrast adjust
correctly;
Whether environment temperature too low.
Unclear or unstable
image
Whether antenna adjusted correctly;
Maybe too weak signal received at the
receiving place.
Superposed image
Whether the antenna is in proper direction;
Maybe received the building or reflected signals
nearby.
Snowstorm
Maybe under wave interference of automobile
motor, train, high voltage line and neon light.
Achromatic or
flashing color
Whether color adjusted well, whether the
decoloration actions under the Colour system
with too weak proper signal.
No car-backing
function
Whether the black AV single line is in loose
connection with the positive power supply of
reversing light. Whether the red connection
head of socket is in poor contact.
Page 18
9. Technical Parameters
Product Name: LCD Color TV Receiver
Display Device: Color TFT-LCD
Receiving Frequency range: 48.25MHZ~863.25MHZ
Sound System: DK I BG M L
Screen Size: 7 inches
Audio Output: 0.3W (Max)
Loudspeaker: One 4.0 cm round loudspeakers
Connecting Terminal: AV power supply jack:
(1. Yellow line is for VIDEO 1 IN.
2. Red line is for VIDEO 2 IN.
3. White line is for AUDIO IN.
4.Blue line is for AUDIO output.
5. In-socket 12V power supply Input
6. Black single lineis for car backing.
7. Antenna jack.
Applicable Power Supply: Car battery (12V) automobile adapter.
Power Consumption: about 10W
Outer Dimension: W 200mm H 170mm T 35mm
Weight: 700g
Resolution: 1440 (H) 234 (V)
Response Speed (ms): R: 30 / F:50
Visible Angle: U: 15 / D:35 R / L: 55
2
Brightness: 300cd/m
Contrast: 150:1
Page 19
DC+ --12V/1200mA
Page is loading ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Premier TSP-4241USD User manual
-
-
-
-
-
-
-
-
-
Other documents
-
PYLE Audio PLVWR740 User manual
-
StarTech.com NF05D1200P Datasheet
-
PYLE Audio PLVWR750T User manual
-
Sitronics LCD CTV-700 Sl User manual
-
Swann SW-A-LCD8 User manual
-
SoundMax SM-LCD711 User manual
-
Hyundai H-LCD703 User manual
-
-
Sanyo 14GX37 User manual
-
