1055 Mendell Davis Drive, Jackson, MS 39272
888-994-7636, unifiedbrands.net
Please reference our website for the most
updated product information and specifications.
Drop-In Hot/Cold Combination Food Well models 9580
model
9580-2A 9580-3A 9580-4A 9580-5A 9580-6A
model 9580-3A shown
Standard Features:
• The same unit can now be used for hot or cold
food applications
Standard Features: COLD USE
• All stainless steel top
• Drain & gate valve standard (Note: gate valve shipped
loose for eld installation by others)
• Stainless, perforated bottom strainer plates provided
• Wrapped, coldwall construction refrigeration
• Stainless steel louver panel provided
• R-404a refrigerant, “CFC free”
Description:
Drop-in self-contained, cold pan / heated food well unit. With
the ip of a switch, this unit is converted from a hot breakfast
buffet to a cold salad bar for lunch, or any other use. One piece
stainless steel top and coved corner interior. Controls, cordset
& louver panel provided. True thermostatic control for hot
operation. R-404a refrigeration system is “CFC free”.
Specifications:
UNIT TOP: Top and water bath tank to be one piece, 16 gauge
stainless steel.
UNIT BODY: Fully insulated, exterior body to be corrosion
resistant steel. Unit sidewalls feature wrapped refrigeration lines
with foamed in place polyurethane insulation, unit bottom tted
with heating elements, berglass insulation and shield. Interior
tted with 1" drain at one end. Drain nipple supplied with gate
valve. 1" high perforated stainless steel bottom strainer plate(s)
provided for cold pan use. Condensing unit mounted on corrosion
resistant framework, suspended below unit body.
CONTROLS: Controls prewired to junction box mounted on
separate stainless steel panel for eld installation in counter
front. Connections to heating elements to be located outside of
heated zone to avoid wiring deterioration. Hard wire connection
required for hot food well operation.
Standard Features: HOT USE
• All stainless steel top
• Open tank Baine Marie style for wet operation
• True thermostatic control for precise food temperatures
• Drain and gate valve
For use with ice. Provided with cooling system to reduce ice usage.
Options & Accessories:
Adaptor bars
Remote on/off switch
Extended thermostatic lead
Randell Drop-In, Page 5
PP SPEC0061 Rev. B
Revised 10/07
1055 Mendell Davis Drive, Jackson, MS 39272, 888-994-7636, unifiedbrands.net
© 2009 Unified Brands. All Rights Reserved. DOVER® and the DOVER® Logo are registered
trademarks in the United States [and various other countries] of Unified Brands, a
wholly-owned subsidiary of Dover Corporation.
REQUIRES HARDWIRE CONNECTION
D
LEGEND FOR
1" DIA DRAIN LINE CONNECTION
120/208V-60Hz-1Ph 21.2Amps
120/240V-60Hz-1Ph 18.3Amps
MODEL # 9580-5A
(4) ELEMENT, 4400 WATTS
1/4hp COMPRESSOR
1" FPT AT 24" AFF
REQUIRES HARDWIRE CONNECTION
D
MODEL # 9580-4A
LEGEND FOR
120/240V-60Hz-1Ph 13.3Amps
120/208V-60Hz-1Ph 15.9Amps
1" DIA DRAIN LINE CONNECTION
1" FPT AT 24" AFF
1/4hp COMPRESSOR
(3) ELEMENTS, 3300 WATTS
120/208V-60Hz-1Ph 10.6Amps
120/240V-60Hz-1Ph 9.2Amps
1" DIA DRAIN LINE CONNECTION
1" FPT AT 24" AFF
1/4hp COMPRESSOR
(2) ELEMENTS, 2200 WATTS
REQUIRES HARDWIRE CONNECTION
D
MODEL # 9580-3A
LEGEND FOR
(1) ELEMENT, 1100 WATTS
REQUIRES HARDWIRE CONNECTION
1/4hp COMPRESSOR
120/208V-60Hz-1Ph 5.3Amps
120/240V-60Hz-1Ph 4.5Amps
1" DIA DRAIN LINE CONNECTION
1" FPT AT 24" AFF
MODEL # 9580-2A
D
LEGEND FOR
6"
6"
6"
1" HIGH PERFORATED
S/S BOTTOM
MODEL #9580-5A
CUTOUT DIMENSION
65.75" X 22.5"
CUTOUT DIMENSION
78.5" X 22.5"
69.25"
63.25"
20"
9"
18.25"
22"
26"
27.25"
65.25"
HP
J
D
1" HIGH PERFORATED
S/S BOTTOM
MODEL #9580-4A
CUTOUT DIMENSION
53" X 22.5"
56.5"
50.5"
20"
9"
18.25"
22"
26"
27.25"
52.5"
1" HIGH PERFORATED
S/S BOTTOM
MODEL #9580-3A
CUTOUT DIMENSION
40.25" X 22.5"
39.75"
37.75"
43.75"
20"
9"
18.25"
22"
26"
27.25"
1" HIGH PERFORATED
S/S BOTTOM
MODEL #9580-2A
CUTOUT DIMENSION
27.75" X 22.5"
25.25"
27.25"
31.25"
20"
22"
26"
18.25"
9"
6"
6"
20"
9"
18.25"
22"
26"
MODEL #9580-6A
12"x20" Cut Out Size No. of Amps / 60 / 1 PH
Model L D Pan Cap. Unit Control Panel Elements Watts H.P. 120V (Refrig.) 208V (Heated) 240V (Heated) Ship Wt.
9580-2A 31 1/8" 26" 2 27 3/4" x 22 1/2" 14” x 6” 1 1100 1/4 5.3 5.3 4.5 110
9580-3A 43 5/8" 26" 3 40 1/4" x 22 1/2" 14” x 6” 2 2200 1/4 5.3 10.6 9.2 135
9580-4A 56 1/2" 26" 4 53" x 22 1/2" 14” x 6” 3 3300 1/4 5.3 15.9 13.8 160
9580-5A 69 1/4" 26" 5 65 3/4" x 22 1/2" 14” x 6” 4 4400 1/4 5.3 21.2 18.3 185
9580-6A 82” 26” 6 78 1/2” x 22 1/2” 14” x 6” 5 5500 1/4 5.3 31.4 27.9 210
Requires 120 / 240V or 120/208V (4 wire) power supply hard wiring to “J” box. 120V refrigeration system - 208/240V heating system.
Models 9580A
REQUIRES HARDWIRE CONNECTION
D
LEGEND FOR
1" DIA DRAIN LINE CONNECTION
120/208V-60Hz-1Ph 21.2Amps
120/240V-60Hz-1Ph 18.3Amps
MODEL # 9580-5A
(4) ELEMENT, 4400 WATTS
1/4hp COMPRESSOR
1" FPT AT 24" AFF
REQUIRES HARDWIRE CONNECTION
D
MODEL # 9580-4A
LEGEND FOR
120/240V-60Hz-1Ph 13.3Amps
120/208V-60Hz-1Ph 15.9Amps
1" DIA DRAIN LINE CONNECTION
1" FPT AT 24" AFF
1/4hp COMPRESSOR
(3) ELEMENTS, 3300 WATTS
120/208V-60Hz-1Ph 10.6Amps
120/240V-60Hz-1Ph 9.2Amps
1" DIA DRAIN LINE CONNECTION
1" FPT AT 24" AFF
1/4hp COMPRESSOR
(2) ELEMENTS, 2200 WATTS
REQUIRES HARDWIRE CONNECTION
D
MODEL # 9580-3A
LEGEND FOR
(1) ELEMENT, 1100 WATTS
REQUIRES HARDWIRE CONNECTION
1/4hp COMPRESSOR
120/208V-60Hz-1Ph 5.3Amps
120/240V-60Hz-1Ph 4.5Amps
1" DIA DRAIN LINE CONNECTION
1" FPT AT 24" AFF
MODEL # 9580-2A
D
LEGEND FOR
6"
6"
6"
1" HIGH PERFORATED
S/S BOTTOM
MODEL #9580-5A
CUTOUT DIMENSION
65.75" X 22.5"
CUTOUT DIMENSION
78.5" X 22.5"
69.25"
63.25"
20"
9"
18.25"
22"
26"
27.25"
65.25"
HP
J
D
1" HIGH PERFORATED
S/S BOTTOM
MODEL #9580-4A
CUTOUT DIMENSION
53" X 22.5"
56.5"
50.5"
20"
9"
18.25"
22"
26"
27.25"
52.5"
1" HIGH PERFORATED
S/S BOTTOM
MODEL #9580-3A
CUTOUT DIMENSION
40.25" X 22.5"
39.75"
37.75"
43.75"
20"
9"
18.25"
22"
26"
27.25"
1" HIGH PERFORATED
S/S BOTTOM
MODEL #9580-2A
CUTOUT DIMENSION
27.75" X 22.5"
25.25"
27.25"
31.25"
20"
22"
26"
18.25"
9"
6"
6"
20"
9"
18.25"
22"
26"
MODEL #9580-6A
REQUIRES HARDWIRE CONNECTION
D
LEGEND FOR
1" DIA DRAIN LINE CONNECTION
120/208V-60Hz-1Ph 21.2Amps
120/240V-60Hz-1Ph 18.3Amps
MODEL # 9580-5A
(4) ELEMENT, 4400 WATTS
1/4hp COMPRESSOR
1" FPT AT 24" AFF
REQUIRES HARDWIRE CONNECTION
D
MODEL # 9580-4A
LEGEND FOR
120/240V-60Hz-1Ph 13.3Amps
120/208V-60Hz-1Ph 15.9Amps
1" DIA DRAIN LINE CONNECTION
1" FPT AT 24" AFF
1/4hp COMPRESSOR
(3) ELEMENTS, 3300 WATTS
120/208V-60Hz-1Ph 10.6Amps
120/240V-60Hz-1Ph 9.2Amps
1" DIA DRAIN LINE CONNECTION
1" FPT AT 24" AFF
1/4hp COMPRESSOR
(2) ELEMENTS, 2200 WATTS
REQUIRES HARDWIRE CONNECTION
D
MODEL # 9580-3A
LEGEND FOR
(1) ELEMENT, 1100 WATTS
REQUIRES HARDWIRE CONNECTION
1/4hp COMPRESSOR
120/208V-60Hz-1Ph 5.3Amps
120/240V-60Hz-1Ph 4.5Amps
1" DIA DRAIN LINE CONNECTION
1" FPT AT 24" AFF
MODEL # 9580-2A
D
LEGEND FOR
6"
6"
6"
1" HIGH PERFORATED
S/S BOTTOM
MODEL #9580-5A
CUTOUT DIMENSION
65.75" X 22.5"
CUTOUT DIMENSION
78.5" X 22.5"
69.25"
63.25"
20"
9"
18.25"
22"
26"
27.25"
65.25"
HP
J
D
1" HIGH PERFORATED
S/S BOTTOM
MODEL #9580-4A
CUTOUT DIMENSION
53" X 22.5"
56.5"
50.5"
20"
9"
18.25"
22"
26"
27.25"
52.5"
1" HIGH PERFORATED
S/S BOTTOM
MODEL #9580-3A
CUTOUT DIMENSION
40.25" X 22.5"
39.75"
37.75"
43.75"
20"
9"
18.25"
22"
26"
27.25"
1" HIGH PERFORATED
S/S BOTTOM
MODEL #9580-2A
CUTOUT DIMENSION
27.75" X 22.5"
25.25"
27.25"
31.25"
20"
22"
26"
18.25"
9"
6"
6"
20"
9"
18.25"
22"
26"
MODEL #9580-6A
REQUIRES HARDWIRE CONNECTION
D
LEGEND FOR
1" DIA DRAIN LINE CONNECTION
120/208V-60Hz-1Ph 21.2Amps
120/240V-60Hz-1Ph 18.3Amps
MODEL # 9580-5A
(4) ELEMENT, 4400 WATTS
1/4hp COMPRESSOR
1" FPT AT 24" AFF
REQUIRES HARDWIRE CONNECTION
D
MODEL # 9580-4A
LEGEND FOR
120/240V-60Hz-1Ph 13.3Amps
120/208V-60Hz-1Ph 15.9Amps
1" DIA DRAIN LINE CONNECTION
1" FPT AT 24" AFF
1/4hp COMPRESSOR
(3) ELEMENTS, 3300 WATTS
120/208V-60Hz-1Ph 10.6Amps
120/240V-60Hz-1Ph 9.2Amps
1" DIA DRAIN LINE CONNECTION
1" FPT AT 24" AFF
1/4hp COMPRESSOR
(2) ELEMENTS, 2200 WATTS
REQUIRES HARDWIRE CONNECTION
D
MODEL # 9580-3A
LEGEND FOR
(1) ELEMENT, 1100 WATTS
REQUIRES HARDWIRE CONNECTION
1/4hp COMPRESSOR
120/208V-60Hz-1Ph 5.3Amps
120/240V-60Hz-1Ph 4.5Amps
1" DIA DRAIN LINE CONNECTION
1" FPT AT 24" AFF
MODEL # 9580-2A
D
LEGEND FOR
6"
6"
6"
1" HIGH PERFORATED
S/S BOTTOM
MODEL #9580-5A
CUTOUT DIMENSION
65.75" X 22.5"
CUTOUT DIMENSION
78.5" X 22.5"
69.25"
63.25"
20"
9"
18.25"
22"
26"
27.25"
65.25"
HP
J
D
1" HIGH PERFORATED
S/S BOTTOM
MODEL #9580-4A
CUTOUT DIMENSION
53" X 22.5"
56.5"
50.5"
20"
9"
18.25"
22"
26"
27.25"
52.5"
1" HIGH PERFORATED
S/S BOTTOM
MODEL #9580-3A
CUTOUT DIMENSION
40.25" X 22.5"
39.75"
37.75"
43.75"
20"
9"
18.25"
22"
26"
27.25"
1" HIGH PERFORATED
S/S BOTTOM
MODEL #9580-2A
CUTOUT DIMENSION
27.75" X 22.5"
25.25"
27.25"
31.25"
20"
22"
26"
18.25"
9"
6"
6"
20"
9"
18.25"
22"
26"
MODEL #9580-6A
Component
-
1
-
2
Randell 9580-2A Datasheet
- Type
- Datasheet
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Delfield TT2-1221 Installation guide
-
Paradyne FrameSaver SLV 9580 T3 ATM DSU Installation Instructions Manual
-
Vollrath Induction Range, Ultra Series User manual
-
Broadcom HBA 9500-16i User manual
-
SINGER 114-38 User manual
-
-
KYOCERA KD250GX-LFB2 User manual
-
Australian Barbell Company 6 PAIR RACK Assembly Instructions
-
Australian Barbell Company 20 Class Bar Rack Assembly Instructions
-
Villa Barcelona LOWMRCL296EH Installation guide
