Zonet ZVC7611W User manual

Type
User manual

This manual is also suitable for

Zonet ZVC7611W is an advanced network camera that allows you to monitor your home or office remotely via the internet or a local network. It features high-quality 640 x 480 video streaming, pan-tilt-zoom control, motion detection, night vision, and two-way audio communication. With its wireless connectivity, you can place the camera anywhere within range of your Wi-Fi network, making it ideal for surveillance in hard-to-reach areas.

Zonet ZVC7611W is an advanced network camera that allows you to monitor your home or office remotely via the internet or a local network. It features high-quality 640 x 480 video streaming, pan-tilt-zoom control, motion detection, night vision, and two-way audio communication. With its wireless connectivity, you can place the camera anywhere within range of your Wi-Fi network, making it ideal for surveillance in hard-to-reach areas.

Copyright Statement
is the registered trademark of Zonet Technology Inc. All the products and
product names mentioned herein are the trademarks or registered trademarks of their
respective holders. Copyright of the whole product as integration, including its
accessories and software, belongs to Zonet Technology Inc. Without the permission of
Zonet Technology Inc., any individual or party is not allowed to copy, plagiarize, imitate
or translate it into other languages.
Table of Contents
1. Introduction ................................................................................................1
2. Package Content..........................................................................................1
3. System Requirement....................................................................................2
4. Hardware Installation ...................................................................................2
4.1 LED and Focusing ................................................................................2
4.2 Know your ZVC7611/ZVC7611W ...........................................................3
4.3 Connecting ZVC7611/ZVC7611W to Your Network ...................................4
4.4 ZVC7611/ZVC7611W Application Example ..............................................5
5. Software Installation ....................................................................................6
6. Using the Administrator Utility..................................................................... 11
6.1 General Setting ................................................................................. 12
6.1.1 LAN Setting ............................................................................... 14
6.1.2 Security..................................................................................... 15
7. Using the Viewer Utility .............................................................................. 16
7.1 Configure IP Camera Viewer ............................................................... 18
7.1.1 Configure Cameras ..................................................................... 18
7.1.1.1 Camera ........................................................................ 19
7.1.1.2 Schedule Recording ....................................................... 21
7.1.1.3 Audio ........................................................................... 23
7.1.1.4 Motion Record ............................................................... 24
7.1.2 General Settings......................................................................... 25
7.1.2.1 General ........................................................................ 25
7.1.2.2 E-Mail Setting ............................................................... 26
7.1.2.3 Security ....................................................................... 27
7.1.2.4 About........................................................................... 28
7.3 Full-screen mode............................................................................... 32
7.4 Scan ................................................................................................ 33
7.5 Zoom-in / Zoom-out .......................................................................... 34
7.6 PTZ.................................................................................................. 35
7.7 Snapshot.......................................................................................... 36
7.8 Recording ......................................................................................... 37
7.9 Video Playback .................................................................................. 38
8. Web Connection and Setup ......................................................................... 39
8.1 Camera ............................................................................................ 40
8.2 LAN ................................................................................................. 41
8.3 WLAN (For ZVC7611W) ...................................................................... 43
8.4 E-Mail and FTP .................................................................................. 45
8.5 Motion Detection ............................................................................... 46
8.6 System............................................................................................. 47
8.7 Status .............................................................................................. 48
8.8 Users ............................................................................................... 48
8.9 Log .................................................................................................. 49
9. Specifications ............................................................................................ 50
10. Frequently Asked Questions ........................................................................ 51
Appendix A Viewing via UPnP in Windows XP ....................................................... 52
Appendix B Configure Windows 2003 Server ....................................................... 55
1
1. Introduction
Thank you for choosing Zonet ZVC7611/ZVC7611W. ZVC7611/ZVC7611W sends live
video through 10/100Mbps wired network to a web browser or camera viewer across
Internet anywhere in the world! This compact, self-contained unit lets you keep an eye
on your home, your kids, and your workplace—whatever’s important to you.
How does the Camera do all of this? Unlike standard “web cams” that require an attached
PC, ZVC7611/ZVC7611W can connect directly to a network. The MJPEG video
compression produces a high quality, high-frame rate, 640 x 480 video stream. The
included Camera Viewer utility lets you record the video to your local hard drive, “live” or
on a predetermined schedule.
Use the instructions in this User Manual to help you integrate ZVC7611/ZVC7611W into
your network. These instructions should be all you need to get the most out of
ZVC7611/ZVC7611W.
2. Package Content
One ZVC7611/ZVC7611W
One Quick Installation Guide
One Installation CD w/Manual
One Power Adapter
One Camera Stand
One Ethernet Cable
One Antenna (ZVC7611W Only)
Contact your local authorized reseller or the store purchased from for any items
damaged and/or missing.
2
3. System Requirement
LAN: 10/100Mbps Fast Ethernet
WLAN: IEEE 802.11b/g
OS System: Windows 2000/XP/Server 2003/Vista/7
IE Version: 6.0.29 or above
CPU: Intel Pentium III 750MHz above or Intel Celeron 1GHz above
Memory Size: 128MB (256MB recommended)
DirectX 9.0 or above
VGA card with fully DirectX 9.0 supported.
VGA Card Resolution: 800 x 600 or above
4. Hardware Installation
4.1 LED and Focusing
The Camera head and its focus ring allow you to modify the aim and focus of
ZVC7611/ZVC7611W.
To adjust ZVC7611/ZVC7611W’s focus, rotate the focus ring.
LED Indicator Status Description
ON Indicates LAN port is connected
LAN
Flashing
Indicates LAN activity
(transferring or receiving data)
ON Indicates WLAN is connected
WLAN
(ZVC7611W only)
Flashing
Indicates WLAN activity
(transferring or receiving data)
POWER ON Indicates camera is receiving power
3
4.2 Know your ZVC7611/ZVC7611W
Front View
Bottom View
Reset Button
LAN Port
Power Jack
Focus Ring
LED Green:
LAN Activity
LED Orange:
WLAN Activity
(ZVC7611W Only)
LED Blue:
Power On
Wireless SMA Connector
(ZVC7611W Only)
4
Port & Button Description
Power Jack Where you can connect the power adapter
LAN Port Where you can connect the RJ-45 Ethernet cable
Antenna Connector
(ZVC7611W Only)
This is standard Reverse SMA connector where any
antenna with Reverse SMA connector can connect to
ZVC7611W
Reset Button
1.
If problems occur with your ZVC7611/ZVC7611W,
press the reset button with a pencil tip for less than 2
seconds and the camera will re-boot itself, keeping your
original configurations.
2.
If problems persist or you experience extreme
problems or you forgot your password, press the reset
button for longer than 5 seconds and the camera will
reset itself to the factory default settings
Note: your original configurations will be replaced with
the factory default settings.
4.3 Connecting ZVC7611/ZVC7611W to Your Network
1. Connect ZVC7611/ZVC7611W to
your network by provided RJ-45
Ethernet cable from the
switch/router to the LAN port of
ZVC7611/ZVC7611W.
2. Connect the power adapter to
the ZVC7611/ZVC7611W and
plug the power adapter to power
socket. ZVC7611/ZVC7611W will
be powered on. When the
ZVC7611/ZVC7611W is ready,
the POWER LED will steady blue.
5
3. You have to connect the Wireless
Antenna to ZVC7611W if you’d
like to use it in a wireless network
environment.
4. Make sure that you have
installed correct VGA driver and
DirectX 9.0 or above.
4.4 ZVC7611/ZVC7611W Application Example
The following diagram explains one of the most typical applications for the
ZVC7611/ZVC7611W.
6
5. Software Installation
NOTE:
Snap-shot screens of the following installation procedure are based on Windows
XP. Installation procedures will be similar for other windows operating systems.
1.
Insert Installation CD to
your CD-ROM drive
and the
Welcome screen appears. If
you don’t see the Welcome
screen, b
rowse CD and
double-click
Autorun.exe
.
2. The Wizard will show four
selections, select the
program you want to install
or click Exit to install later.
7
3.
Click Next to continue the
installation
4.
If you want to change the
path, click Change;
otherwise just click Next to
continue.
5.
Click Install to start
installing the program
8
6.
Click Finish to complete
Administrator Utility
installation.
7.
Go back to wizard page and
click Install 16 Chan
camera viewer, the system
will start running viewer
installation.
8.
Administrator Utility will
run automatically after
viewer installation. In first
page, the cameras found in
the network are listed.
Choose one you want to
configure and click
Configure Camera to
continue.
9
9.
Enter default password
1234 and click OK to login
IP setup page.
10.
The program will detect IP
address status of your
network automatically. You
can accept the suggested
value or enter the value
manually. If you enter the
value manually, please be
aware that Subnet Mask
must be the same for both
camera and PC. Click OK to
apply the configuration.
11.
Click IPCam Surveillance
Software icon from
desktop/ quick launch bar/
start menu to start the IP
camera surveillance
software.
10
12.
C
lick System configure
button and a popup
menu will appear. Select
Configure Cameras to
configure
ZVC7611/ZVC7611W.
13.
C
hoose the camera you
want to connect in Camera
Search list and click Select
to add it into the channel you
want to view then click ok
14.
IP Camera Viewer will pop
out and the video will show
on the channel you choose
automatically.
Congratulations! You’ve successfully configured your ZVC7611/ZVC7611W!
11
6. Using the Administrator Utility
IPCam Admin Utility allows users to search and setup ZVC7611/ZVC7611W located
within Intranet or Internet. From the utility, users can view all the information of the
selected camera; furthermore, it provides a setting wizard, which can guide users to add
ZVC7611/ZVC7611W to the network easily and promptly.
There are two ways to run IPCam Admin Utility as follows.
1. Click Start select Programs\IP Camera\Admin Utility to run the utility.
2. Double click IPCam Admin Utility icon to run the utility.
12
6.1 General Setting
Information of Camera
Camera Information It displays MAC address, IP Address, Camera Name and
Model of the selected camera.
Task Bar
Search Camera
Click Search Camera to search cameras on the network.
Browse Camera via Web
Click Browse Camera via Web to
activate browser and
auto connect to IP cam to get video
Configure Camera
Click Configure camera to
change the IP setting and
user name password of the IP Cam you selected.
Languages
Language Supports 3 languages (English/Japanese/Chinese).
13
When you click Configure Camera icon , a screen will pop up to enter User Name
and Password. The default value is as follows.
User Name: Admin
Password: 1234
14
6.1.1 LAN Setting
IP Address: Enter an IP Address within the IP address range on your LAN. Default
IP Address: http://192.168.2.3
NetMask: Subnet Mask field must match the subnet setting on your LAN.
Gateway: Gateway setting must be the same with the gateway used by the PCs on
your LAN.
DNS: DNS Server (Domain Name Server) translates names to IP addresses. Set the
same DNS Server as the PCs on your LAN.
Web Port: Default web port is 80. If you change the web port from 80 to 8080, you
must type http://192.168.2.3:8080 to connect ZVC7611/ZVC7611W through web
browser.
15
6.1.2 Security
Camera Name: The default camera name is IP Camera/Wireless IP Camera.
New Password: Enter the new password you want to use for ZVC7611/ZVC7611W.
Confirm Password: Retype the new password to confirm the setting.
16
7. Using the Viewer Utility
Before you start:
IPCam Surveillance Software will only work when monitor’s resolution is 1024 x 768.
Please must change the resolution before using IPCam Surveillance Software.
You can click IPCam Surveillance Software icon from desktop/ quick launch
bar/ start menu to start IPCam Surveillance software.
IP Camera Viewer Introduction:
You can also put the mouse cursor on a certain figure to see the button name.
Language
Display
layout
Full screen /
Scan
Zoom Out /
Zoom In
PTZ Control /
Home
Recording / System configure
Playback / Snap shot
Close window (stop
surveillance) / Minimize window
Video displaying area
Message display
box
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60

Zonet ZVC7611W User manual

Type
User manual
This manual is also suitable for

Zonet ZVC7611W is an advanced network camera that allows you to monitor your home or office remotely via the internet or a local network. It features high-quality 640 x 480 video streaming, pan-tilt-zoom control, motion detection, night vision, and two-way audio communication. With its wireless connectivity, you can place the camera anywhere within range of your Wi-Fi network, making it ideal for surveillance in hard-to-reach areas.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI