Global ROO4M Operating instructions

Brand: Global

Model: ROO4M

Type: Operating instructions

This manual is also suitable for

P009TM

Installation and

Operation Manual

Please read the explanation carefully before use it.

2.4G Digital Wireless Camera

With Quad USB Receiver

(ROO4M+P009TM)

S-B004M5000001 R004M+P009TM 105X142mmx16P,80g

Features

Motion detection

4 channel selected

Video/Audio

Metal case

Quad function

Recorder function

Remote monitoring

Connect the receiver with the USB port on your computer. The windows hardware

wizard installs the receiver driver to your computer. If the hardware wizard can

not find the driver, Please manually install the software.

Software Installation

Package list

1.It can reduce or increase the quantity of camera according to client's

request. Connect max 4pcs camera

2.When switch to quad mode, the sound will be shielded

4. Interface Basics

This sections gives you a brief introduction about the various interfaces.

4.1 Main Window

Takes a snapshot of the camera s view

2 3

Snapshot

Detect

Web sever

Setup

Playback

Enters the playback mode to view recorded videos

Enters the setup option of BlueJay Viewer

Enables web server mode for remote viewing

Controls the viewer to go into detection mode or standby mode

1. Monitoring Screen:

This will display the camera s view. Depending on the configuration, you can

have different type of viewing methods on this screen.

This icon indicates that the camera is monitoring

This icon indicates that the camera is in standby mode

This icon indicates that the camera is recording

This icon indicates that the camera s audio is enabled

3. Option Menu: This area allows you to do the following.

2. Channel Status: This area will display the status of individual cameras.

4. Camera/Screen Control: This area controls the following:

Displays the signal strength of wireless cameras

Cruise camera to let it automatically move on its own

Opens the snapshot folders to view captured pictures

Adjusts the screen size on the monitoring screen

Displays one channel on the monitoring screen

Displays multiple channels on the monitoring screen

Cycles the camera to see all area

5. Channel Information: Displays the current channel s information

System Requirements

Device

CPU

RAM

Network

Resolution

IP Cam

Operating Software

Pentium 4 3.0 GHz or above

1 GB or above

Ethernet Port

1024 x 768 (24 bits)

1 or more

Windows XP or Vista

512 MB or above

Ethernet Port

800 x 600 (24 bits)

1 or more

Windows 2000

Windows Media Player 9

Windows Media Player

Pentium 4 2.0 GHz or above

Windows Media Player 9 or above

Minimum Recommended

Match code

Open the rubber cover to expose match button. Use tweezers or sharp tool

to setting the frequency .

Match button

CHCH

The first use need to match code, Press the icon show the dialog box as below:

Select a camera with you want to match, then

press the match button on the camera about 3

seconds. if the matching success , the window

displays image of the surveillance camera .

1. Language Support: Changes the interface of the Wireless Guard to the

language selected.

2. Mail Server: The mail server settings for users who wish to use the E-mail

notification when detection occurs

3. Start Up Options: Allows user to pre -determine start up options including:

Start Detecting: Starts the viewer in detection mode

Start Web Server: Starts the viewer web server

4. Recurring recording: Records over older files to save space for the hard disk

5. Storage Locations: Locations of where the files are being saved for recorded

videos and captured images

6. Web Service: Configuration settings for the web server

IP Address: The IP address of the web service for the viewer

Web Server Port: The port for the web service

Web Server Account: Default is user

Web Server Password: Password for the web service

Server Port: The port for the MMS service

Server Channel: The channel for the MMS service

7. System Setting

Press web server icon of main screen, and open the IE browser to input

http: \\web server IP:7788, then appear the below dynamic image.

Web server

MMS Server

If you can't see image please Installation the Java software

The IE browser is without audio monitoring. If you need to monitor with audio

images, the system provides a second control method: Open windows media

player , in the menu bar select "File" select "Open URL ... ..." option. In the pop-

up window, enter http://192.168.1.106:8080/ point to confirm, with audio remote

control image display OK.

1. Choose from the following to adjust the image:

Flip Horizontal: Flips the image horizontally

Flip Vertical: Flips the image vertically

Rotate: Rotates the image accordingly with rotation angle and direction

2. Adjust video parameters to process brightness, saturation, and gamma.

Basic Settings

1. Name and note: Defines a personal name and description of the camera

2. Text Display: Allows customization of what information can be displayed on the

channel s screen

Channel Information: Check it to show channel number and channel name

Date Time: Check it to show date, time, and week

Font Size: Adjusts the size of the font being displayed

Text color: The text color on the screen

Background: The text background color on the screen

Watermark: Check for attaching a watermark image on the screen

Image Adjust

This section sets up how recording will be performed under recording mode.

Record Setting

1. Image Quality: Adjusts the quality of the recording format

Resolution: Adjust the recording image size

Quality: How detailed the recording of the image

2. Surveillance Mode: Adjusts the type of recording it would be trigged with

First Selection Details:

Schedule: Will go into detection mode and record on user s configured

schedule

Record-at-click: Once in detection mode, it will record in either full time

or on detection

Non-record: Will only monitor in detection mode, no recording will be done

Second Selection Details:

Full-time: Will always record

Triggered: Will record a time frame when viewer detects movement

3. Schedule Based: If Schedule is chosen from mode, user can preset a

time to record .

Add new Schedule: To add a schedule

Edit Schedule: To edit an existing schedule

Delete Schedule: Deletes a selected schedule

1 2

If the camera is mounted in a special way, the section can adjust the image

accordingly.

1. Choose the start time of Scheduling Type Monthly.

2. Choose the end time of Scheduling Type Monthly.

3. Select the icon Operative Period to specific period.

4. Select the icon to setup month day of Monthly

Scheduling.

1. Choose the start time of Scheduling Type Weekly.

2. Choose the end time of Scheduling Type Weekly.

3. Select the icon Operative Period to specific period.

4. Select the icon to setup weekday of Weekly

Scheduling .

1. Setup the start time of Scheduling Type daily.

2. Setup the end time of Scheduling Type daily.

3. Select the icon Operative Period to specific

period.

1. Setup the start date and time of Scheduling

Type Periodically .

2. Setup the end date and time of Scheduling

Type Periodically.

Select the icon recording, and the next, Add new Schedule, then appear the

below image

This section will be available if the recording option is set to triggered, this

particular area allows user to customize sections of detection and the

sensitivity.

Motion Detect

1. Displayed Screen: Hit the Refresh View button to refresh the image.

2. Block Setting: Allows custom areas to detect on the displayed screen

Full-area detection: Detects all areas on the screen

Custom detection: Detects user created detection blocks

Add new block: Create a new block to detect, do this by holding down the

right mouse button over the displayed screen area to create a new block

Delete a block: Select a block on the displayed screen and hit this button

to delete it

Clear all blocks: Deletes all blocks on the displayed screen

Test Motion detect: Test the detection by moving an object in front of the

camera, the blocks should change color when it detects motion

3. Sensitivity: Adjust the sensitivity of the blocks

Add new Schedule

Periodically

Daily

Weekly

Monthly

Alert Setting

This section will be available if the recording option is set to triggered, this

particular area allows the user to set notification options in the even the

viewer detects motion.

1. Vibrational alert: When enabled, it vibrates the whole viewer when motion

is detected

2. Message alert: When enabled, it prompts a message alert on viewer when

motion is detected

3. Sound alert: When enabled it will playback the chosen sound when motion

is detected

4. E-mail alert: When enabled, a message will be sent based on the

information filled out

This section allows users to playback and search through the recorded

videos.

1. Screen: This area will display the video output from the recording

2. Time and channel selection: This filters out when and which channel to be

listed in the Record List , hit the Query button to bring up the list once selected

the proper times and channel.

3. Record list: This area is where you choose the video and have the option to

delete it and open the file directory of your videos

4. Video tracker: Use this to track through your video

5. Playback controls: (From left to right)

Play / Stop / Previous track / Rewind / Fast forward / Next track

/ Playback speed (1x, 2x, 4x, 8x, 16x)

6. Capture options: Use the camera to capture a picture on the main display

screen and use the folder to access the captured picture(s)

Playback

Q: Why are some of the camera and/or screen control not accessible?

A: Some of the controls can only be accessed when in single screen mode.

Also, you will need tobe out of the detection mode in order to access them

as well.

Q: Why can I not access the settings and playback?

A: You need to be out of detection mode in order to access these settings.

Q: Why can t I pan, tilt, and/or zoom?

A: These can only be done by going into single screen mode or that the

camera itself does not support pan, tilt, and/or zoom.

Q: I don t have static IP address, can I used DDNS?

A: This program supports DDNS, but you can still access it through IP

address or DNS address.

Q: Why does the viewer not start recording after going into detection mode?

A: Double check the channel s recording setup. Make sure that the

recording options you set are the correct ones. If it s full-time, it should

record all the time. If triggered, it will record only when camera detects

movement.

Q: When I enabled the web server, I can t preview the image of the camera

from other PCs. Why?

A: Please check if the local area connection has the firewall blocking that

particular program and that the IP address is correct.

Q: What does can not connect to following channel(s): CH** mean?

A: It means the viewer can not detect the IP camera. It could be caused by a

bad network setup, make sure that your network is configured correctly.

Q: What does can not import to the following channel(s): CH** mean?

A: It means that another web server is conflicting with another IP address.

Double check your IP address assignment on all your network devices.

Q: What does no buffer space error and virtual RAM insufficient mean?

A: It means your computer is running low on resources (typically means that

your RAM is insuficient). Upgrading your memory will most likely address

this issue. Again, we strongly recommend systems to be equipped with 1

GB of RAM.

Q&A

Specification

General

Operating Frequency 2400~2525

Unobstructed Effective Range 100m(Min.)

Operating Temperature

Operating Humidity 85%RH

-10 ~ +50

Power Supply

Image resolution

Video resolution(VGA)

Imaging Sensor Type

View Angle

Night Vision Range

Consumption Current

Power Supply

Image Forma

Video Format

Receive

CMOS

3~5M

350 50mA

DC +5V

JPEG

640x480

WMV

640x480

Camera

Item Value

Global ROO4M Operating instructions

Brand: Global

Model: ROO4M

Type: Operating instructions

This manual is also suitable for

P009TM

Download PDF

report

Global ROO4M Operating instructions

This manual is also suitable for

Global ROO4M Operating instructions

Other documents