2. JasonL
  3. QDSB3127.W.WT

JasonL QDSB3127.W.WT Operating instructions

  • Hello, I've reviewed the assembly instructions for the Quadro Square Legs 3P 120 Degree Workstation. This document provides detailed steps on how to assemble your new workstation. It includes information on the required tools, number of people needed for the installation and details on components including screws that need to be used during assembly. Feel free to ask me any questions about the assembly process or the workstation itself.
  • What tools are required for assembly?
    How many people are needed for the installation?
    What is the length of the extendable beam?
Page 1 of 7
Need help!
Call us on
1300 527 665
www.jasonl.com.au
Tools Required: Power screwdriver; Allen key set (provided)
2 persons required for installation
ASSEMBLY INSTRUCTIONS
Quadro Square Legs
3P 120 Degree
Workstation
Sizes: 1200x1200x700 mm
Table top x3
Leg Quadro Square x3
Intermediate Leg Quadro Square x3
Beam x6
Plastic bracket x24
A
B
C
D
E
Allen keyJ
M8x20MM CSK x12
M8x20MM Socket head x12
M6x20MM Socket head x24
Washers and chipboard screws x24
F
G
H
I
COMPONENTS
SCREWS
Page 2 of 7
Need help!
Call us on
1300 527 665
www.jasonl.com.au
D
E
F G H I
B
ASSEMBLY INSTRUCTIONS
Quadro Square Legs
3P 120 Degree
Workstation
Sizes: 1200x1200x700 mm
A
C
Page 3 of 7
Need help!
Call us on
1300 527 665
www.jasonl.com.au
ASSEMBLED
WORKSTATION
TOP VIEW
ASSEMBLY INSTRUCTIONS
Quadro Square Legs
3P 120 Degree
Workstation
Sizes: 1200x1200x700 mm
D
E
A
B
C
G
H
STEP 01
Using Allen Key provided, attach 4 plastic brackets per leg (E)
(as per picture above) using M6x20MM (H) Socket head screw.
Using Allen Key provided, attach M8x20MM Socket head (G)-
screw socket half way into leg for both legs (B).
STEP 02
Page 4 of 7
Need help!
Call us on
1300 527 665
www.jasonl.com.au
ASSEMBLY INSTRUCTIONS
Quadro Square Legs
3P 120 Degree
Workstation
Sizes: 1200x1200x700 mm
STEP 03
Please set extendable beam (D) to
800mm length and secure beam at
that length using screws provided
Page 5 of 7
Need help!
Call us on
1300 527 665
www.jasonl.com.au
800
ASSEMBLY INSTRUCTIONS
Quadro Square Legs
3P 120 Degree
Workstation
Sizes: 1200x1200x700 mm
STEP 04
TOP VIEW
Attach beam (D) to legs (B) using nut insert in legs.
See point attached
Frame looks like this. Using Allen Key, attach beam (D) with Socket (F)
STEP 05
Page 6 of 7
Need help!
Call us on
1300 527 665
www.jasonl.com.au
F
F
F
F
ASSEMBLY INSTRUCTIONS
Quadro Square Legs
3P 120 Degree
Workstation
Sizes: 1200x1200x700 mm
B
B
C
Page 7 of 7
Need help!
Call us on
1300 527 665
www.jasonl.com.au
Please desktop on top of the frame. Tops will need to be drilled
using 30mm chipboard screws. Please put washers underneath
the plastic brackets hole before drilling the screws into the Tops.
ASSEMBLY INSTRUCTIONS
Quadro Square Legs
3P 120 Degree
Workstation
Sizes: 1200x1200x700 mm
STEP 06
TOP VIEW
I
/