JasonL QDS120B6127.W.WT Operating instructions

Type
Operating instructions
Page 1 of 7
Need help!
Call us on
1300 527 665
www.jasonl.com.au
Tools Required: Power screwdriver; Allen key set (provided)
2 persons required for installation
ASSEMBLY INSTRUCTIONS
Quadro Square Legs
6P 120 Degree
Workstation
Sizes: 1200x1200x700 mm
Table top x6
Leg Quadro Square x4
Intermediate Leg Quadro Square x7
Beam x12
Plastic Bracket x48
A
B
C
D
E
Allen keyJ
M8x20MM CSK x24
M8x20MM Socket head x24
M6x20MM Socket head x48
Washers and chipboard screws x48
F
G
H
I
COMPONENTS
SCREWS
Page 2 of 7
Need help!
Call us on
1300 527 665
www.jasonl.com.au
D
E
F G H I
B
ASSEMBLY INSTRUCTIONS
Quadro Square Legs
6P 120 Degree
Workstation
Sizes: 1200x1200x700 mm
A
C
Page 3 of 7
Need help!
Call us on
1300 527 665
www.jasonl.com.au
ASSEMBLED
WORKSTATION
TOP VIEW
ASSEMBLY INSTRUCTIONS
Quadro Square Legs
6P 120 Degree
Workstation
Sizes: 1200x1200x700 mm
D
E
A
B
C
G
H
STEP 01
Using Allen Key provided, attach 4 plastic brackets per leg (E)
(as per picture above) using M6x20MM (H) Socket head screw.
Using Allen Key provided, attach M8x20MM Socket head (G)-
screw socket half way into leg for both legs (B).
STEP 02
Page 4 of 7
Need help!
Call us on
1300 527 665
www.jasonl.com.au
ASSEMBLY INSTRUCTIONS
Quadro Square Legs
6P 120 Degree
Workstation
Sizes: 1200x1200x700 mm
STEP 03
Please set extendable beam (D) to
800mm length and secure beam at
that length using screws provided
Page 5 of 7
Need help!
Call us on
1300 527 665
www.jasonl.com.au
800
ASSEMBLY INSTRUCTIONS
Quadro Square Legs
6P 120 Degree
Workstation
Sizes: 1200x1200x700 mm
STEP 04
TOP VIEW
Attach beam (D) to legs (B) using nut insert in legs.
See point attached
Frame looks like this. Using Allen Key, attach beam (D) with Socket (F)
STEP 05
Page 6 of 7
Need help!
Call us on
1300 527 665
www.jasonl.com.au
F
F
F
F
ASSEMBLY INSTRUCTIONS
Quadro Square Legs
6P 120 Degree
Workstation
Sizes: 1200x1200x700 mm
B
B
C
Page 7 of 7
Need help!
Call us on
1300 527 665
www.jasonl.com.au
Please desktops on top of the frame. Tops will need to be drilled
using 30mm chipboard screws. Please put washers underneath
the plastic brackets hole before drilling the screws into the Tops.
ASSEMBLY INSTRUCTIONS
Quadro Square Legs
6P 120 Degree
Workstation
Sizes: 1200x1200x700 mm
STEP 06
I
TOP VIEW
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7

JasonL QDS120B6127.W.WT Operating instructions

Type
Operating instructions

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI