2. Kamstrup
  3. OMNIPOWER® CT meter

Kamstrup OMNIPOWER® CT meter, OMNIPOWER® single-phase, OMNIPOWER® three-phase DIN rail meter, OMNIPOWER® three-phase meter Installation guide

  • Hello! I've reviewed the Installation guide for Kamstrup's METERTOOL and OMNIPOWER meters. This document provides instructions on how to connect the meters via an optical read-out head and how to enable radio control through the METERTOOL software. I'm ready to answer any questions you might have about the process.
  • How do I open the METERTOOL software?
    Where should I connect the optical read-out head?
    What do I need to import?
    Where can I find radio control settings?
Connecion of rdio
METERTOOL
Insllion guide
Kmstrup
kmstrup.com · info@kmstrup.com
Connecion of rdio
METERTOOL
1 Sr
Open he sofwre METERTOOL OMNIPOWER®.
2 Connec
Connec n opicl red-ou hed o he USB por on your PC nd o he
opicl por on OMNIPOWER®.
3 Impor
Impor he encrypion keys of he meer.
4 The METERTOOL OMNIPOWER® soluion
Selec he menu iem “Tools”.
5 The METERTOOL OMNIPOWER® soluion
Selec “Enbled” under “Rdio conrol”.
Visi kmsrup.com for furher info
Kamstrup A/S • 55123256_A1_EN_11.2021
Nice to know
If you need help, selec View help in
he menu in he upper lef corner
If you need help for connecing
n opicl red-ou hed, see
Communicion seings
If you need help for imporing
encrypion keys, see Imporing
encrypion keys
If you need help for connecing rdio,
see Rdio conrol
/