Engineered by NewTechWood. Designed by You.
Installation Guidelines
Installation
Below shows an example of a one (1) kit installation, please refer to the legend if you forget which
symbols represent which parts. Design paper can be downloaded from our website at
www.newtechwood.com to draw out your layout before installation.
Step 2. Insert the accessories
Step 3. Snap in the timbers and your DONE!!
Step 1. Lay the grids on a flat solid surface
Legend
For an easier read and explanation we have taken the parts of the kit for this installation guide and
used symbols to denote them.
Components in 1 Kit
Snap Clips
Locking Inserts
Capped Composite Timbers
Grids
Gap Spacer
Butt Joint Clips
Snap Clip in the horizontal direction
Snap Clip in the vertical direction
For spacing the ends of each timber evenly
Symbol
Visit www.newtechwood.com for a detailed installation guide.
12 x
4 x
4 x
3 x
1 x
4 x
1
Engineered by NewTechWood. Designed by You.
Call us at 1-866-728-5273
Locking insert at the end of timber
More than two locking inserts per timber
Locking insert in the middle of the timber
Locking Inserts
Grids
4 interlocking sides highlighted in yellow
Cutting grids the same width as boards
Snap Clips
Snap Clips at a maximum distance of three
(3) holes away
Snap Clips not at a maximum distance of
three (3) holes away
Actual
Symbol
Actual Symbol
Actual Symbol
Butt Joint Clips
Actual Symbol
Connecting two timbers on the same clip
and using the Gap Spacer to space them
evenly
Using the butt joint clip as a snap clip
Components
in 1 Kit
Installation Guidelines
Visit www.newtechwood.com for a detailed installation guide.
4
3
12
4
2
Engineered by NewTechWood. Designed by You.
Call us at 1-866-728-5273
Gap Spacer
Actual
Symbol
Components
in 1 Kit
Installation Guidelines (Cont.)
Visit www.newtechwood.com for a detailed installation guide.
1
3
Two timbers being spaced evenly with the
Gap Spacer
A timber in the horizontal direction and a
timber in the vertical direction being
spaced evenly by the Gap Spacer
Engineered by NewTechWood. Designed by You.
Call us at 1-866-728-5273
Repeat until complete
Starting Corner
Row A
Row B
Row C
Row A
Row B
Row B
Row A
Row A
Row C
Row C
Row B
Row C
Starting Corner
Patterns / Layouts
Below shows some examples of what kind of patterns/layouts can be completed with the
Deck-A-Floor.
Border / Picture Frame
Brick Layout
Visit www.newtechwood.com for a detailed installation guide.
Engineered by NewTechWood. Designed by You.
4
Straight Layout
Repeat until complete
Starting Corner
Call us at 1-866-728-5273
4
/
