Kmart 42619901 User manual

Kmart
Brand
Kmart
Model
42619901
Type
User manual
1PC
1PC 1P C
1PC
1PC
1PC
1
2
34
56
78
1PC 1P C 91PC 10
1PC 4P CS
12
10
2PCS
6PCS
12P C S
6x35mm
15x9.5mm
6x30mm
4x40mm
9
7
8
1
2
3
4
56
10
11
12
11
1PC
4PCS
4x30mm
2PCS
6x30mm
4x35mm
4x14mm
20x150mm
12
12
12
10P C S
Hardw
are list
(
Assembly Instructions
CARE INSTRUCTIONS:
TO BE ASSEMBLED ON A CLEAN, DRY AND SMOOTH SURFACE. WIPE CLEAN WITH A SOFT DAMP CLOTH. NEVER USE SCOURERS, ABRASIVES OR CHEMICAL SOLVENTS. CHECK AND
TIGHTEN ALL PARTS REGULARLY. KEEP AWAY FROM MOISTURE AND DIRECT SUNLIGHT. STORE IN A DRY PLACE. FOR INDOOR USE ONLY.
WARNING!
DO NOT STAND, SIT OR LEAN ON THIS UNIT. DO NOT USE THIS UNIT AS A STEP LADDER OR AS A CHOPPING SURFACE. ENSURE THIS UNIT IS USED ONLY ON A FLAT SURFACE. DO NOT
USE THIS UNIT UNLESS ALL BOLTS AND SCREWS ARE FIRMLY SECURED. DO NOT PLACE HOT ITEMS SUCH AS COFFEE CUPS DIRECTLY ON THE SURFACE OF THIS FURNITURE ITEM. KEEP
AWAY FROM CHILDREN AND BABIES. THIS PACKAGE CONTAINS SMALL PARTS AND SHARP POINTS. ADULT ASSEMBLY REQUIRED. A MILD ODOUR MAY BE PRESENT WHEN FIRST OPENING
THIS CARTON. SIMPLY ALLOW TO AIR OUTSIDE AND THIS WILL FADE. MAXIMUM SAFE LOAD: 10KGS FOR TOP PANEL, 5KGS FOR INSIDE DRAWER.
A
A
D
D
D
A
A
A
A
4
5
3
11
3
1
1
C
D
D
D
4
5
3
11
2
12
12
12
12
C
C
B
B
BB
B
Step 1: Fix Part A onto board 1 and put Part D into the corresponding position (as per
below diagram). Attach board 3 , 4 & 5 onto board 1 , and then fix the round screws
(Part B) with a screwdriver. Ensure all parts align.
Step 2: Slide board 11 into the corresponding position (as per below diagram). Ensure it is
fully fitted in the groove.
Step 3: Put part D into the corresponding position (as per below diagram) and attach board
2 with screws (Part C). Ensure board 11 is fully fitted in the groove.
Step 4: Screw on the legs (Part 12) as per below diagram.
G
G
B
A
7
8
9
6
10
E
E
F
F
Step 5: Assemble board 6 , 7 , 8 with screws (Part G). Slide board 9 into the
corresponding position (as per below diagram). Ensure it is fully fitted in the groove. Screw
Part A onto board 10 , and attach this piece to the rest of the drawer before fixing the round
screws (Part B) with a screwdriver. Ensure all parts align.
Step 6: Slide the drawer into the unit. Assembly is complete.
Step 7: Fix the part E at the back of the unit with a screwdriver.
Step 8: Fix table to the wall with part F using screwdriver.
TOPPLING FURNITURE WARNING:
• It is strongly recommended that
this product is permanently fixed to
the wall.
• Please seek professional advice if
you are in doubt of what fixing
device to use.
• Regularly check that anchors are
securely maintained.
• Stability of tall items may be
aected by thick pile carpet or
uneven floors.
• Do not place unanchored
televisions on furniture.
Caution: for your safety when
attaching the anchor fixings,
please note the following:
• Check any electrical wires or
plumbing inside the wall before
drilling any holes (if you are unsure
please seek professional advice
from a qualified tradesperson)
  • Page 1 1
  • Page 2 2
  • Page 3 3

Kmart 42619901 User manual

Kmart
Brand
Kmart
Model
42619901
Type
User manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents