2. GreenBrook
  3. HS1

GreenBrook HS1 Operating instructions

  • Hello! I've reviewed the Installation and Operating Instructions for the KingShield HS1 Dual Voltage Shaver Socket. This document outlines the necessary steps for safe installation, including wiring and voltage selection. I'm ready to assist with any inquiries you have about the product or its use.
  • Who should install this product?
    What size back box is required for installation?
    What voltage options are available?
MODEL NUMBER: HS1
INSTALLATION/OPERATING
INSTRUCTIONS FOR
DUAL VOLTAGE
SHAVER SOCKET
SAFETY
INSTRUCTIONS
1. This product should be installed by a
qualified electrician in accordance with
these instructions and the current IEE
regulations.
2.This product must be earthed.
3.All bare earth wires must be covered
with the appropriate green/yellow
sleeving, not supplied. Ensure all
electrical connections are tight.
4. Please check with manufacturers
instructions for suitability with
rechargeable shavers.
1. Ensure power supply is disconnected
before proceeding with the installation.
2. Shaver socket should be mounted in
a47mm back box.
3. Feed the supply cable through the
appropriate knockout in the
installation box. If using a metal back
box you will need to fit a 20mm rubber
grommet.
4. Strip outer sheath of the supply cable to
suitable length and then remove 10mm
of the insulation from the Live (brown or
red) and Neutral (blue or black)
conductors to expose the inner cores.
5. Insert Neutral (blue or black)
conductor into the terminal
marked N and fully tighten screw.
6. Insert Live (brown or red) conductor
into the terminal marked L and fully
tighten the screw.
7. Insert the earth conductor,
ensuring it has been sleeved with
green/yellow sleeving, into the
terminal marked
8. Ensure that an additional earth cable is
connected between the shaver supply
unit earth terminal and the earth
terminal in the back box being used.
9. Fit socket to back box with the two
fixing screws provided.
10. Reconnect supply.
To select the voltage required 115V/230V by
inserting shaver plug into the appropriate
socket.
Always unplug appliance after use.
INSTALLATION & WIRING
INSTRUCTIONS
HS1 Instructions:Layout 1 15/7/11 13:12 Page 1
Issue no: 702611
PLEASE KEEP THESE INSTRUCTIONS
SAFE FOR FUTURE REFERENCE
WEST ROAD . HARLOW
ESSEX . CM20 2BG . UK
sales@gr eenb rook.co.uk
W W W. G R E E N B R O O K . C O . U K
Your KingSheild Dual Voltage
Shaver Socket is guaranteed
for 12 months from the date of purchase.
This does not affect your statutory rights.
115/230VA - 20VA Max Load
SPECIFICATION
GUARANTEE
HS1 Instructions:Layout 1 15/7/11 13:12 Page 2
/