Metropolitan N7103-258B User manual

Type
User manual

Metropolitan N7103-258B is a lighting fixture designed for indoor use. It can be mounted on a ceiling or wall and provides ambient lighting. The fixture has a metal frame with a black or brushed nickel finish and clear glass shades. It uses three 60-watt incandescent bulbs (not included) and is compatible with dimmers. The fixture is easy to install and comes with all necessary hardware. It is a stylish and functional addition to any home décor.

Metropolitan N7103-258B is a lighting fixture designed for indoor use. It can be mounted on a ceiling or wall and provides ambient lighting. The fixture has a metal frame with a black or brushed nickel finish and clear glass shades. It uses three 60-watt incandescent bulbs (not included) and is compatible with dimmers. The fixture is easy to install and comes with all necessary hardware. It is a stylish and functional addition to any home décor.

INSTALLATION INSTRUCTIONS
Item#N7103-258B (New. 04/28/2015)
READ AND SAVE THESE INSTRUCTIONS
W A R N I N G ! S H U T P O W E R O F F AT F U S E O R C I R C U I T B R E A K E R .
AVERTISSEMENT! COUPER LE COURANT AU NIVEAU DES FUSIBLES OU DU DISJONCTEUR.
Fig. 1
Fig. 2
MOUNTING THE FIXTURE (Fig.1)
1. Shut off the power at the fuse box or circuit
breaker. If necessary, remove the old fixture,
including the mounting hardware.
2. Carefully remove the fixture from the carton and
check that all parts are included as shown in the
illustration.
3. Attach mounting plate (A) to the junction box by
using mounting screws (B) (Size: #8-32N*L0.5”).
The side of the mounting plate marked “GND” must
face out.
CONNECTING THE WIRES (Fig. 2)
4. At this point, connect the electrical wires as shown
in Fig. 2, making sure that all wire connectors are
secured. If your outlet box has a ground wire
(green or bare copper), connect the fixture’s
ground wire to it. Otherwise, connect the fixture’s
ground wire directly to the mounting plate using the
green screw provided. After the wires are
connected, tuck them carefully inside the outlet
box.
FINISHING THE INSTALLATION (Fig.1)
5. Place fixture body (H) over the mounting plate (A)
and secure it with screws (C).
6. Hang the crystal drops (F) to the fixture body (H).
7. Place the tube (E) over the socket of the fixture
body (H).
8. Install the light bulb(s) (G) (not included) in
accordance with the fixture’s specifications. (DO
NOT EXCEED THE MAXIMUM WATTAGE
RATING!). (NE PAS DEPASSER LA PUISSANCE
NOMINALE MAXIMALE!)
Your installation is now complete. Return power and
test the fixture.
Note: Illustration (Fig.1) on this manual is for
installation purposes only. It may or may not be
identical to the fixture purchased.
LA-2458E
FIXTURE
WIRES
Black or
Smooth
HOUSE
WIRES
Black
(Hot)
FIXTURE
WIRES
White or
Ribbed
HOUSE
WIRES
White
(Neutral)
FIXTURE
WIRES
Green or
Bare
Copper
(Ground)
HOUSE
WIRES
Green
(Ground)
A
B
G
E
C
D
H
F
Set
A
-
021
-
120206
-Mounting Plate
-Ground Screw
-Mounting Screw*2
©
2015 Minka
Lighting, Inc.
This product is protected by United States Federal
and/or State Law, including Patent and/or Copyright
laws.”
  • Page 1 1

Metropolitan N7103-258B User manual

Type
User manual

Metropolitan N7103-258B is a lighting fixture designed for indoor use. It can be mounted on a ceiling or wall and provides ambient lighting. The fixture has a metal frame with a black or brushed nickel finish and clear glass shades. It uses three 60-watt incandescent bulbs (not included) and is compatible with dimmers. The fixture is easy to install and comes with all necessary hardware. It is a stylish and functional addition to any home décor.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI