ABB Welcome M22344-W User manual

VER:1.0 │ │ 31/12/2015

ABB-Welcome

Pos: 2 /DinA4 - Anleitungen O nline/Inhalt/KN X/DoorEntr y/83220-AP- xxx/Titelblatt - 8 3220-AP-xxx - ABB @ 19\mod_132324 9806476_15. docx @ 11108 4 @ @ 1

M22344-W

Basic 4.3" Video hands-free

indoor station

=== Ende der Liste für Te xtmarke Cover ===

ABB-Welcome

|

— 2 —

Pos: 4 /Busch-J aeger (Neus truktur)/Modul-Str uktur/Online-Do kumentatio n/Inhaltsverzeic hnis (--> Für alle Do kumente <--)/Inhalts verzeichnis @ 19\mod_1320 649044386_1 5.docx @ 109653 @ @ 1

1 Safety ............................................................................................................ 3

2 Intended use .................................................................................................. 3

3 Environment .................................................................................................. 3

3.1 ABB devices ................................................................................. 3

4 Operations ..................................................................................................... 5

4.1 Standard operations ..................................................................... 5

4.1.1 Control elements .......................................................................... 5

4.2 Control actions .............................................................................. 7

4.2.1 Incoming call / In a call ................................................................. 7

4.2.2 Display & volume settings during calling....................................... 8

4.2.3 Communication menu ................................................................... 9

4.3 Settings ....................................................................................... 11

4.3.1 Overview ..................................................................................... 11

4.3.2 Switch actuator settings .............................................................. 12

4.3.3 Program button settings .............................................................. 13

4.3.4 Ringtone settings ........................................................................ 14

4.3.5 Volume settings .......................................................................... 15

4.3.6 Date and time settings ................................................................ 16

4.3.7 Other settings ............................................................................. 17

4.3.8 History review ............................................................................. 18

4.3.9 Language settings ...................................................................... 20

4.3.10 Information .................................................................................. 21

4.3.11 Reseting factory default .............................................................. 22

4.4 Cleaning ..................................................................................... 23

4.5 Adjusting the device.................................................................... 24

5 Technical data ............................................................................................. 25

6 Mounting / Installation .................................................................................. 26

6.1 Requirements for the electrician ................................................. 26

6.2 General installation instructions .................................................. 27

6.3 Mounting ..................................................................................... 28

ABB-Welcome

Pos: 6 /Busch-J aeger (Neus truktur)/Modul-Str uktur/Online-Do kumentatio n/Überschriften (--> Für alle Doku mente <--)/1. E bene/S - T/Sicherh eit @ 18\mod _130261279179 0_15.docx @ 103357 @ 1 @ 1

1 Safety

Pos: 7 /Busch-J aeger (Neus truktur)/Modul-Str uktur/Online-Do kumentatio n/Sicherheit (--> Für all e Dokument e <--)/Warnhinweise/ Sicherheit - 23 0 V @ 18\mod_ 13026068167 50_15.docx @ 103308 @ @ 1

Warning

Electric voltage!

Risk of death and fire due to electrical voltage of 100-240 V.

– Work on the 100-240V supply system may only be performed by

authorised electricians!

– Disconnect the mains power supply prior to installation and/or

disassembly!

Pos: 8 /Busch-J aeger (Neus truktur)/Modul-Str uktur/Online-Do kumentatio n/Überschriften (--> Für alle Doku mente <--)/1. E bene/A - F/Besti mmungsgemäßer Gebrauc h @ 18\mo d_130276332131 6_15.docx @ 1 03483 @ 1 @ 1

2 Intended use

Pos: 9 /DinA4 - Anleitungen O nline/Inhalt/KN X/DoorEntr y/83220-AP- xxx/Bestimmungsg emaesser G ebrauch - 83 220-AP-xxx-500 @ 20\mo d_132456116 8699_15.docx @ 112728 @ @ 1

The M22344-W is an integral part of the ABB-Welcome door communication system and

operates exclusively with components from this system. The device must only be

installed in dry indoor rooms.

Pos: 10 /Busc h-Jaeger (Ne ustruktur)/Modul- Struktur/Onlin e-Dokumentati on/Überschriften ( --> Für alle Doku mente <--)/1. Ebene/U - Z/Umwelt @ 18\mod_1302 614158967_15. docx @ 103383 @ 1 @ 1

3 Environment

Pos: 11 /Busc h-Jaeger (Ne ustruktur)/Modul- Struktur/Onlin e-Dokumentati on/Umwelt (--> Für alle Doku mente <--)/Hinweise/Hi nweis - U mwelt - Hinweis Ele ktrogeräte @ 18\mod_1 302763973434_ 15.docx @ 1035 00 @ @ 1

Consider the protection of the environment!

Used electric and electronic devices must not be disposed of with

domestic waste.

– The device contains valuable raw materials which can be

recycled. Therefore, dispose of the device at the appropriate

collecting depot.

Pos: 12 /DinA 4 - Anleitungen Online/Ueberschrif ten/2./ABB Geraete @ 19\ mod_132316 2843832_15.doc x @ 110875 @ 2 @ 1

3.1 ABB devices

Pos: 13 /Busc h-Jaeger (Ne ustruktur)/Modul- Struktur/Onlin e-Dokumentati on/Umwelt (--> Für alle Doku mente <--)/Hinweise/Hi nweis - U mwelt - ABB Ele ktrogeräte @ 19\ mod_13231627 45839_15.doc x @ 110867 @ @ 1

All packaging materials and devices from ABB bear the markings and test seals for

proper disposal. Always dispose of the packaging material and electric devices and their

components via the authorized collecting depots and disposal companies.

ABB products meet the legal requirements, in particular the laws governing electronic

and electrical devices and the REACH ordinance.

ABB-Welcome

(EU-Directive 2002/96/EG WEEE and 2002/95/EG RoHS)

(EU-REACH ordinance and law for the implementation of the ordinance (EG)

No.1907/2006)

ABB-Welcome

Pos: 18 /DinA 4 - Anleitungen Online/Ueberschrif ten/1./Bedi enung @ 18\ mod_13026139 24165_15.doc x @ 103365 @ 1 @ 1

4 Operations

Pos: 19 /DinA 4 - Anleitungen Online/Ueberschrif ten/2./Nor maler Betrieb @ 18\mod_130 2768820965_ 15.docx @ 103 540 @ 2 @ 1

4.1 Standard operations

Pos: 20 /DinA 4 - Anleitungen Online/Ueberschrif ten/3./Bedi enelemente @ 2 0\mod_132 3260220559_15.d ocx @ 1116 47 @ 3 @ 1

4.1.1 Control elements

Pos: 21 /DinA 4 - Anleitungen Online/Inhalt/KN X/DoorEntry/8 3220-AP-xxx/Bedienele mente - 832 20-AP-xxx @ 18\mod_1303 212853605_15. docx @ 103 673 @ @ 1

Fig.

1

Control elements

1

3

4

5

6

7

2

ABB-Welcome

No.

Functions

1

4.3" Color display

2

Comunication button

2A When a call is coming, press this button to activate the communication

within 30 seconds and press it again to end the call.

2B In standby mode, press this button to enter the communication menu.

If the LED flashes slowly, this means an incoming call.

If the LED illuminates,, this means that a conversation is in progress.

If the LED flashes rapidly, it means system is busy.

3

Unlock button

Press this button to open the door at any time.

4

Surveillance button

4A In standby mode, press this button to survey the default outdoor station.

4B While the display is on, press this button to the survey the next outdoor

station. (This function is available depending on the installation type)

4C While the display is on, hold this button to take a snapshot.

4D In standby mode, if the LED flashes, press this button to display the

"History" record.

If the LED flashes slowly, this represents a notification on a missed

call.

5

Mute button

5A In standby mode, press this button to mute ringtone of the indoor

station.

5B In standby mode, hold the button to mute ringtone of all indoor stations

in the apartment.

5C When a call is coming, press this button to reject the call.

5D During the conversation, press this button to mute microphone.

The LED illuminates to indicate mute status.

6

Programmable button 1

6A Release the 2nd lock connected with an outdoor station

(default function).

6B *Programmable button for additional functions, e.g. call to guard unit

7

System setting button

Enter the system setting menu for various functions of the device.

If the LED flashes rapidly, it means that setting is busy.

* For use of those buttons, please contact your electrical installer.

Pos: 22 /Busc h-Jaeger (Ne ustruktur)/Modul- Struktur/Onlin e-Dokumentati on/Steuermodul e - Online-D okumentation (--> F ür all e Dokument e <--)/+++++++ +++++ Seitenumbruch +++ +++++++ ++ @ 9\mod _126889866809 3_0.docx @ 5 2149 @ @ 1

ABB-Welcome

Pos: 26 /DinA 4 - Anleitungen Online/Ueberschrif ten/2./Bedi enaktionen @ 20\mod_1323 262294281_1 5.docx @ 111911 @ 2 @ 1

4.2 Control actions

Pos: 27 /DinA 4 - Anleitungen Online/Ueberschrif ten/3./Sprec h- und Vide overbindung @ 20\mod_132326 2368700_15.doc x @ 111927 @ 3 @ 1

4.2.1 Incoming call / In a call

Pos: 28 /DinA 4 - Anleitungen Online/Inhalt/KN X/DoorEntry/8 3220-AP-xxx/Sprech- und Videover bindung - 832 20-AP-xxx @ 20\mod_13232 62341852_15.d ocx @ 111919 @ @ 1

Fig.

2

Incoming call / in a call

During calls, the following functions are available:

No.

Functions

1

Press this button to accept the incoming call; In a call, press this button to

end the call.

2

Press this button to open the door where the call is from.

3-A

Press this button to survey the analog camera of the outdoor station if

there is one.

3-B

Hold this button to take a snapshot.

4

Press this button to mute the ringtone of an incoming call; in a call, press

this button to mute the microphone.

5-A

Press this button to activate the function of the programmable button.

5-B

If the function "release 2nd-lock" or "control switch actuator" is assigned to

The programmable button, press this button to activate the function.

6-A

6-B

Press this button to enable or disable the full-screen function.

Hold this button to enter the brightness and volume setttings menu.

7

Time left of the connection.

8

Number of outdoor stations

Pos: 29 /Busc h-Jaeger (Ne ustruktur)/Modul- Struktur/Onlin e-Dokumentati on/Steuermodul e - Online-D okumentation (--> F ür all e Dokument e <--)/+++++++ +++++ Seitenumbruch +++ +++++++ ++ @ 9\mod _126889866809 3_0.docx @ 5 2149 @ @ 1

30s

Outdoor 1

1

3

6

7

8

2

4

5

ABB-Welcome

Pos: 30 /DinA 4 - Anleitungen Online/Ueberschrif ten/3./Tuer oeffnen @ 20\mod_132326 3277453_15.doc x @ 111935 @ 3 @ 1

4.2.2 Display & volume settings during calling

Pos: 31 /DinA 4 - Anleitungen Online/Inhalt/KN X/DoorEntry/8 3220-AP-xxx/Tuer oeffn en - 83220- AP-xxx @ 20\mod_ 13232679584 79_15.docx @ 112109 @ @ 1

Fig.

3

Display & volume settings during calling

Hold button for 3s to enter the display & volume setttings menu during a call or

conversation, the following functions are available.

No.

Functions

1

Navigation buttons ( up / down / confirm / cancel, etc)

2

Press the navigation buttons as needed.

3

Speech volume(only can be adjusted during conversation)

4

Saturation

5

Brightness

6

Value set

Pos: 32 /Busc h-Jaeger (Ne ustruktur)/Modul- Struktur/Onlin e-Dokumentati on/Steuermodul e - Online-D okumentation (--> F ür all e Dokument e <--)/+++++++ +++++ Seitenumbruch +++ +++++++ ++ @ 9\mod _126889866809 3_0.docx @ 5 2149 @ @ 1

120s

Outdoor 1

2

4

5

6

1

2

3

ABB-Welcome

Pos: 33 /DinA 4 - Anleitungen Online/Ueberschrif ten/3./Stu mm schalten @ 2 0\mod_1323 263607142_15. docx @ 111 951 @ 3 @ 1

Pos: 66 /Busc h-Jaeger (Ne ustruktur)/Modul- Struktur/Onlin e-Dokumentati on/Steuermodul e - Online-D okumentation (--> F ür all e Dokument e <--)/+++++++ +++++ Seitenumbruch +++ +++++++ ++ @ 9\mod _126889866809 3_0.docx @ 5 2149 @ @ 1

4.2.3 Communication menu

Pos: 31 /DinA 4 - Anleitungen Online/Inhalt/KN X/DoorEntry/8 3220-AP-xxx/Tuer oeffn en - 83220- AP-xxx @ 2 0\mod_13232 67958479_15.d ocx @ 112109 @ @ 1

4.2.3.1 Overview

Press button to enter the communication menu. The following functions are available:

No.

Functions

1

Call to guard unit

-Call guard unit directly.

2

Swtich actuator

-Activate the existing actuator list

ABB-Welcome

4.2.3.2 Switch actuator

Fig.

4

: Switch actuator

Set the actuator list in the “system settings-switch actuator“ menu first.

After chosing a list, press button √ to enable the lock or light which is connected with the

switch actuator.

SWITCH ACTUATOR

Actuator 1

(001)

ABB-Welcome

4.3 Settings

4.3.1 Overview

Press button to enter the system settings menu. The following functions are available:

No.

Functions

1

Switch actuator

-Set the actuator list in this menu

2

Program button

-Set functions for programmable buttons

3

Ringtone

-Set the ringtone for outdoor bells, indoor bell or others

4

Volume

-Set ringtone volumes

5

Date and time

-Set different times.

6

Other settings

-Other settings, e.g. auto full screen

7

History

-View all communication entries in the menu, e.g. received calls, missed

calls,

8

Language

-Set the local language

9

Information

10

Reset factory default

Pos: 27 /DinA 4 - Anleitungen Online/Ueberschrif ten/3./Sprec h- und Vide overbindung @ 20\mod_ 132326236870 0_15.docx @ 1 11927 @ 3 @ 1

ABB-Welcome

4.3.2 Switch actuator settings

Fig.

5

: Switch actuator settings

No.

Functions

1

Existing switch actuator list: Press button √ to modify the settings.

2

Add a new actuator list:Totally, up to 10 switch actuator lists can be added.

3

Enter to change target address with “+” or “-” button from 001 to 199.

4

Rename the switch actuator list:

Scroll through letters of the alphabet or numbers one by one with “+” or

“-” button

3

4

SWITCH ACTUATOR

Actuator 1

(001)

Add New

Target Address

Rename

002

light

Save

Cancel

SWITCH ACTUATOR

2

1

Add a new list

ABB-Welcome

4.3.3 Program button settings

Fig.

6

: Program button settings

No.

Functions

1

Set functions for the program button, e.g. releasing 2nd-lock, calling guard

unit, enabling the switch actuator.

*Only the switch actuator list can be assigned

to the program button.

Button 1

Release 2nd-Lock

PROGRAM BUTTON

1

ABB-Welcome

4.3.4 Ringtone settings

Fig.

7

: Ringtone

No.

Functions

1

Select the bell sound for the default outdoor station.

2

Select the bell sound for other outdoor stations.

3

Select the bell sound for the apartment door.

4

Select the bell sound for others, e.g.a call from the guard unit

1

Default Outdoor

Other Outdoors

RING TONE

Ring Tone 1

Ring Tone 2

2

Doorbell

Ring Tone 3

Others

Ring Tone 4

3

4

ABB-Welcome

4.3.5 Volume settings

Fig.

8

: Volume settings

No.

Functions

1

Set the volume of bell sound.

2

Enable/disable the feedback tone which sounds when the touch button is

pressed.

3

The ringtone can be set fixed or cycled.

1

Ringtone Volume

Touchbutton Tone

VOLUME

Volume 3

2

√

Repeated Tone

√

3

ABB-Welcome

4.3.6 Date and time settings

Fig.

9

: Date and time settings

No.

Functions

1

Set the date.

2

Set the time.

3

Enable/disable the summer time function.

1

Date(YYYY-MM-DD)

Time

DATE AND TIME

2013

2

08

Summer Time

√

：

00

-

01

-

01

3

ABB-Welcome

4.3.7 Other settings

Fig.

10

: Other settings

No.

Functions

1

Enable/disable the auto full screen function.

2

Enable/disable the auto-snapshot function.

3

Enable/disable the missed call function( flashes when there is a missed

call).

1

Auto Full Screen

Auto-snapshots

OTHER SETTINGS

√

2

Missed

Call

√

3

ABB-Welcome

4.3.8 History review

Fig.

11

: History review

No.

Functions

1

Up to 100 events can be recorded in the history menu.

-If the snapshot function is enabled, an icon is diplayed.If no snapshot

function, the icon is not displayed..

-Date, time and type of the event are recorded together with the

snapshot.

- Directions: means dialing calls

means receiving calls

means missed calls

●

HISTORY

1/2

Outdoor -1

1/63

2013-03-21

16:45

Outdoor - 1

●

2013-03-21

16:45

Outdoor - 1

●

2013-03-21

14:24

Outdoor - 1

1

2

3

ABB-Welcome

2

Press this button to view details of this event.

Two pictures are always made when a visitor rings the bell.

3

Press this button to delete a record item

ABB-Welcome

4.3.9 Language settings

Fig.

12

: Language settings

English

LANGUAGE

Page is loading ...

ABB Welcome M22344-W User manual

ABB Welcome M22344-W User manual

Related papers

Other documents