Xanté FilmStar 4 Operating instructions

Instructions!Instructions!

XANTÉ’s FilmStar 4

Desktop Film Making Technology

is a registered trademark and FilmStar™ is a trademark of XANTÉ CORPORATION. XANTÉ CORPORATION:

Post Office Box 16526, Mobile, AL 36616-0526, USA, Tel. 251-473-6502, Fax: 251-473-6503, www.xante.com

XANTÉ 1-800-926-8839

Technical Support 1-800-926-8393

1. Pour approximately 8 oz. of the 16 oz.

FilmStar Solution in the bottom of the

FilmStar System.

2. Load film into the FilmStar System,

toner side up. Keep guiding it in until

you feel it stop.

3. Turn the crank away from you slowly, fully

coating the film with solution.

When finished using the FilmStar 4

system, please discard the FilmStar

solution in accordance with federal,

state, and local regulations.

Cleaning Instructions:

For best results, clean the FilmStar 4 base, roller,

and metal guide roller with warm, soapy water

after each use.

FS4 v1 12-9-02