Xanté Accel a Writer 8300 Postscript Level 2 User guide

_____________________________________________________ i

®

A8300D-6th

03/09/98

100-100269

iibb ____________________________________________________

Trademarks

XANTÉ

®

, Accel-a-Writer

®

, and Accel-a-Graphix

®

are registered trademarks

of XANTÉ CORPORATION, registered in the United States Patent and

Trademark Office. X•ACT™ and FilmStar™ are trademarks of XANTÉ

CORPORATION.

Adobe

®

, Adobe

®

Illustrator

®

,

Adobe

®

Photoshop

®

, Adobe

®

PageMaker

®

,

Adobe

®

PostScript

®

, and the PostScript

®

logo are registered trademarks of

Adobe Systems Incorporated, registered in the United States Patent and

Trademark Office. Adobe

®

Acrobat™, Adobe

®

PostScript

®

3™, Adobe

®

Separator™, and PrePrint™ are trademarks of Adobe Systems Incorporated

which may be registered in certain jurisdictions. Aldus

®

is a registered

trademark of Aldus Corporation, registered in the United States Patent and

Trademark Office. Apple

®

, AppleTalk

®

, EtherTalk

®

, LaserWriter

®

, and

Macintosh

®

are registered trademarks of Apple Computer, Inc., registered in

the United States Patent and Trademark Office. LocalTalk™, Balloon

Help™, and SimpleText™ are trademarks of Apple Computer, Inc.

AutoCAD

®

is a registered trademark of Autodesk, Inc., registered in the

United States Patent and Trademark Office.

Canon

®

is a registered trademark of Canon USA, registered in the United

States Patent and Trademark Office. Centronics

®

is a registered trademark of

Centronics Data Computer Corporation, registered in the United States Patent

and Trademark Office. CorelDRAW™ is a trademark of Corel Corporation.

DEC

®

is a registered trademark of Digital Equipment Corporation,

registered in the United States Patent and Trademark Office.

Hewlett-Packard

®

, HP

®

and LaserJet

®

are registered trademarks of Hewlett-

Packard, Co., registered in the United States Patent and Trademark Office.

Intel

®

and Pentium

®

are registered trademarks of Intel Corporation

registered in the United States Patent and Trademark Office. Token Ring

®

is

a registered trademark of International Business Machines Corporation,

registered in the United States Patent and Trademark Office. Hammermill

®

is a registered trademark of International Paper, registered in the United

States Patent and Trademark Office. ITC Avante Garde Gothic

®

, ITC

Bookman

®

, ITC Zapf Chancery

®

, and ITC Zapf Dingbats

®

are registered

trademarks of International Typeface Corporation, registered in the United

States Patent and Trademark Office and some foreign countries. ITC

typefaces are copyrighted © by the International Typeface Corporation.

_____________________________________________________ iii

Helvetica

®

, Palatino

®

, New Century Schoolbook

®

, and Times

®

are

registered trademarks of Linotype AG and/or its subsidiaries, registered in

the United States Patent and Trademark Office.

FreeHand™ is a trademark of Macromedia, Inc. Microsoft

®

, MS-DOS

®

,

Windows

®

, and Windows NT

®

are registered trademarks of Microsoft

Corporation, registered in the United States Patent and Trademark Office.

MultiAd Creator

®

is a registered trademark of MultiAd Services, Inc.,

registered in the United States Patent and Trademark Office.

Novell

®

and NetWare

®

are registered trademarks of Novell, Inc., registered

in the United States Patent and Trademark Office.

Olivetti™ is a trademark of Olivetti, Inc.

QuarkXPress

®

is a registered trademark of Quark, Inc., registered in the

United States Patent and Trademark Office.

UL

®

is a registered trademark of Underwriters Laboratory, registered in the

United States Patent and Trademark Office. ENERGY STAR

®

is a

registered trademark of the US EPA, registered in the United States Patent

and Trademark Office.

Varityper

®

is a registered trademark of Varityper, Inc., registered in the

United States Patent and Trademark Office.

Ethernet

®

and Xerox

®

are registered trademarks of Xerox Corporation,

registered in the United States Patent and Trademark Office.

Manual Notice

XANTÉ CORPORATION reserves the right to make changes to this

manual and to the equipment described herein without notice. Every

effort has been made to ensure that this manual is free of

inaccuracies and omissions. However, XANTÉ CORPORATION

makes no warranty of any kind including, but not limited to, any

implied warranties of merchantability and fitness for a particular

purpose with regard to this manual.

XANTÉ CORPORATION assumes no responsibility for, or liability

for, errors contained in this manual or for incidental, special, or

consequential damages arising out of the furnishing of this manual,

or the use of this manual in operating the equipment, or in

connection with the performance of the equipment when so operated.

ivbb ____________________________________________________

Proprietary

The digitally encoded software included with the XANTÉ Accel-a-

software may not be reproduced, modified, displayed, transferred, or

copied in any form or manner or on any media, without the express

written permission of XANTÉ CORPORATION.

Copyright

Rights Reserved. Printed in the USA. This manual may not be copied in

whole or in part, nor transferred to any other media or language without the

express written permission of XANTÉ CORPORATION.

Safety Information

The printer generates a small amount of ozone gas during image transfer

in the printing process. When shipped from the factory, the printer

meets the Underwriter’s Laboratory (UL) standard for ozone emission.

Warning! An invisible laser beam which radiates inside the laser

printer’s scanner unit can cause permanent eye damage. DO

NOT disassemble or try to adjust the laser scanner unit.

FCC Classification

Warning! Changes or modifications to this unit not expressly

approved by the party responsible for compliance could

void the user’s authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a

Class A digital device, pursuant to Part 15 of the FCC Rules. These limits

are designed to provide reasonable protection against harmful interference

when the equipment is operated in a commercial environment. This

equipment generates, uses, and can radiate radio frequency energy and, if

not installed and used in accordance with the instruction manual, may cause

harmful interference to radio communications. Operation of this equipment

in a residential area is likely to cause harmful interference in which case the

user will be required to correct the interference at his own expense.

_____________________________________________________ v

Shielded cables must be used with this unit to ensure compliance with the

FCC Class A limits.

Power Information

Engine: 100 - 120 volts; 3.5 amps; 385 watts

Power Cord

The power cord is the main disconnect device. It should be plugged into an

easily accessible outlet.

For 115 Volt Configuration:

The power cord to be used with 115 Volt configuration is minimum type

SJT (SVT) 18/3, rated 250 Volts ac, 10 Amps with a maximum length of 15

feet. One terminated in an IEC 320 attachment plug. The other end is

terminated in a NEMA 5-15P plug.

For 230 Volt Configuration

The power cord to be used with 230 Volt configuration is minimum type

SJT (SVT) 18/3, rated 250 Volts ac, 10 Amps with a maximum length of 15

feet. One terminated in an IEC 320 attachment plug. The other end is

terminated as required by the country where it will be installed.

Le cable de transport d'energie que doit etre utilis'e la configuration 230

Volts est le type minimum SJT (SVT), 18/3, nominal 250 Volts ac, 10

Amps, 4.5 m long maximum. Un bout est raccorde comme exige par le pays

ou il sera utilis'e.

Das Netzkabel ist das haupfsachliche Diskonnektionsmittel, es sollte in eine

leicht erreichbare steckdos gesteckt werden.

Das Netzkabel kann mit einer 230 Volts Konfiguration verwonder werden

vom typ: Minimum VDE or HAR, 3 X 1.00 mm

2

, 250 V ac, 10 Amps,

maximal 4.5 m long. Ein Ende ontspriche dem Stecker IEC 320. Das andoro

Ende entspricht den Anfoderungen des entsprechenden Landes.

Power Conservation

As an ENERGY STAR

®

Partner, XANTÉ

CORPORATION has determined this product

meets the ENERGY STAR

®

guidelines for

energy efficiency. This printer enters a low-

power state after 30 minutes of inactivity. This

complies with the U.S. EPA ENERGY STAR

Program, but is not an EPA endorsement of the

product.

vibb ____________________________________________________

Manufacturer’s Declaration of Conformity

The Product Accel-a-Writer 8300 has been designed and manufactured in

accordance with the following international standards:

EN 50081-1 “Generic Emissions Standard for Residential,

Commercial and Light Industrial Products of” 01,

Feb. 1991

EN 50082-1 “Generic Immunity Standard for Residential,

Commercial and Light Industrial Products of” 01,

Feb. 1991

EN 55022 “Limits and Methods of Measurement of Radio

Interference Information Technology Equipment of”

14, April 1987

IEC 1000-4-2 “Testing Measurement Techniques, Electrostatic

Discharge of” 1995, First Edition

IEC 1000-4-3 “Testing and Measurement Techniques, Radio

Frequency, Electromagnetic Field Immunity Test of”

1995 First Edition

IEC 1000-4-4 “Testing and Measurement Techniques, Electrical

Fast Transient/Burst Immunity Test of” 1995 First

edition

MIL-STD-45662A “Calibration System Requirements”

EN 60950 “Safety of Information Technology Equipment

including Electrical Business Equipment”

I, the undersigned, hereby declare that the equipment specified above

conforms to the above Directives and Standards

Place Mobile, Alabama

Date December 7, 1995 Robert C. Ross, Jr.

President

Colophon and Credits

This manual was written using Adobe PageMaker, Adobe Acrobat, Adobe

Photoshop, and FreeHand. The typefaces for the main body of the manual

are Times, Helvetica, and Courier.

Credits: edited by Lesa Moore; written by Lane Crume, Stephanie Wright,

and Pam Throgmorton; designed by Gene Everette; illustrated by Phillip

Shepard, Dan Wilson, Susie Simmons, and Pat Richey; special thanks to

XANTÉ Engineering, XANTÉ Technical Support, and all of our reviewers.

◊ ◊ ◊

_____________________________________________________ vii

Table of Contents

Chapter 1 - Introduction.............................................................. 1-1

The XANTÉ Accel-a-Writer 8300........................................... 1-3

About this Manual.................................................................... 1-4

Manual Conventions ................................................................ 1-5

Other Helpful Documentation.................................................. 1-6

About Your Printer .................................................................. 1-6

Printer Features.................................................................. 1-8

PostScript Typefaces ......................................................... 1-9

About XANTÉ Utilities ......................................................... 1-10

Warranty and Product Registration........................................ 1-10

Chapter 2 - Installation ................................................................ 2-1

Introduction.............................................................................. 2-3

Printer Location ....................................................................... 2-3

Package Contents ..................................................................... 2-4

Unpacking the Printer .............................................................. 2-5

Overview of the Accel-a-Writer 8300 ..................................... 2-7

Installing Options..................................................................... 2-9

Controller Board Upgrades ............................................... 2-9

Ethernet Upgrade ........................................................ 2-9

Extra Wide Print Upgrade......................................... 2-10

Internal Hard Disk Upgrade...................................... 2-10

NEIT Upgrade........................................................... 2-10

Print Resolution Upgrade.......................................... 2-10

RAM Upgrades ......................................................... 2-11

Paper Handling Options .................................................. 2-11

Paper Feeder.............................................................. 2-12

Duplexer.................................................................... 2-14

The Toner Cartridge............................................................... 2-24

The Paper Cassettes ............................................................... 2-28

The Manual Feed Tray........................................................... 2-32

viiibb ____________________________________________________

Verify the Printer Setup ......................................................... 2-35

Connecting the Power Cord ............................................ 2-35

Starting the Printer........................................................... 2-35

Reviewing the Start-up Page ........................................... 2-36

The Printer Interfaces............................................................. 2-36

Connecting to a Macintosh.............................................. 2-37

Connecting to a PC.......................................................... 2-38

Connecting to the Parallel Port ................................. 2-38

Connecting to the Serial Port .................................... 2-39

Connecting an External SCSI Disk ................................. 2-41

Connecting an External SCSI Disk to the Printer..... 2-41

Initializing a Hard Disk............................................. 2-42

Chapter 3 - Macintosh Setup....................................................... 3-1

Introduction.............................................................................. 3-3

Before You Begin .................................................................... 3-3

XANTÉ Utilities CD-ROM (Macintosh)................................. 3-3

XInstaller.................................................................................. 3-5

Adobe Acrobat Reader 3.0....................................................... 3-9

Adobe PostScript Printer Drivers............................................. 3-9

Selecting the Adobe PostScript Printer Driver.................. 3-9

Adobe PSPrinter 8.3.1 ................................................ 3-9

The AdobePS 8.5.1 ................................................... 3-10

PSPrinter 8.3.1................................................................. 3-11

Installing PSPrinter 8.3.1 and the PPD ..................... 3-11

PSPrinter 8.3 User Guide.......................................... 3-13

Mac Watermark Plug-in Folder ................................ 3-13

AdobePS 8.5.1 ................................................................. 3-14

Installing AdobePS 8.5.1 .......................................... 3-14

Installing the PPD for AdobePS 8.5.1 ...................... 3-15

Configuring the PPD ....................................................... 3-16

Manual PPD Setup.................................................... 3-18

Configuring the Printer.................................................... 3-19

Downloads Folder .................................................................. 3-20

App Drivers Folder ................................................................ 3-22

Aldus APD Folder ........................................................... 3-22

Aldus PPD Folder............................................................ 3-23

QuarkXPress PDF Folder ................................................ 3-23

_____________________________________________________ ix

XANTÉ Command Center..................................................... 3-24

The General Menu........................................................... 3-24

Printer Status............................................................. 3-25

Printer Information ................................................... 3-25

Spooling .................................................................... 3-25

Margin Adjustment ................................................... 3-25

X•ACT Calibration ................................................... 3-26

Download PostScript File ......................................... 3-26

Test Directory ........................................................... 3-26

Reboot Printer ........................................................... 3-26

Startup Page .............................................................. 3-26

The Networking Menu .................................................... 3-27

Novell Print Server ................................................... 3-27

AppleTalk ................................................................. 3-28

TCP/IP ...................................................................... 3-28

The Color Menu .............................................................. 3-28

Transfer Curve .......................................................... 3-29

CRD Directories ....................................................... 3-29

Linearize ................................................................... 3-29

XANTÉ Linearizer................................................................. 3-29

Adobe Downloader ................................................................ 3-30

The File Menu ................................................................. 3-30

Download Fonts ........................................................ 3-30

Download PostScript File ......................................... 3-30

The Special Menu............................................................ 3-31

Printer Status............................................................. 3-31

Printer Font Directory ............................................... 3-31

Other Special Menu Options..................................... 3-31

Procedures.............................................................................. 3-31

The Spooler ..................................................................... 3-32

Using the Front Panel ............................................... 3-32

Using XANTÉ Command Center ............................. 3-32

Calibration with a Densitometer...................................... 3-36

Printing a Calibration Strip ....................................... 3-36

Using the Densitometer ............................................ 3-37

Linearizing the Densitometer Data ........................... 3-38

Creating a Custom Gamma Curve ............................ 3-39

Accurate Calibration Technology.................................... 3-40

xbb ____________________________________________________

Printer Margin Adjustment.............................................. 3-42

Downloaded Fonts........................................................... 3-44

Downloading Fonts................................................... 3-44

Reviewing and Removing Downloaded Fonts ......... 3-46

Chapter 4 - PC Setup ................................................................... 4-1

Introduction.............................................................................. 4-3

Before You Begin .................................................................... 4-3

XANTÉ Utilities CD-ROM (PC)............................................. 4-3

XANTÉ Utilities Installer ........................................................ 4-6

XANTÉ Utilities and Application Drivers ........................ 4-6

Adobe Acrobat Reader 3.0....................................................... 4-7

Adobe PostScript Printer Drivers............................................. 4-8

Windows 3.1 and 3.11 Printer Drivers .............................. 4-8

Installing the AdobePS Printer Driver ........................ 4-8

Installing your Printer’s PPD .................................... 4-10

Configuring the PPD for Windows 3.1 and 3.11 ...... 4-11

Deleting Previous Driver Versions ........................... 4-15

Windows 95 Drivers........................................................ 4-16

Installing the AdobePS Printer Driver and Printer PPD .....4-16

Configuring the PPD for Windows 95...................... 4-20

Windows NT Drivers ...................................................... 4-23

Windows NT............................................................. 4-23

Configuring the Printer.................................................... 4-28

PDFs Folder ........................................................................... 4-28

PS_Files Folder ...................................................................... 4-29

XANTÉ Command Center..................................................... 4-31

Configuration for XANTÉ Command Center ................. 4-31

The Options Menu........................................................... 4-32

The Controller Menu ....................................................... 4-32

Select Product ........................................................... 4-33

General...................................................................... 4-33

Align Paper ............................................................... 4-35

CRD Directory .......................................................... 4-35

Linearize ................................................................... 4-36

Spooler ...................................................................... 4-36

Novell........................................................................ 4-36

Test Directory ........................................................... 4-37

Transfer Curve .......................................................... 4-37

X•ACT ...................................................................... 4-37

_____________________________________________________ xi

The Ports Menu ............................................................... 4-38

The XANTÉ Linearization Tool ............................................ 4-38

Procedures.............................................................................. 4-39

The Spooler ..................................................................... 4-39

Using the Front Panel ............................................... 4-39

Using XANTÉ Command Center ............................. 4-39

Calibration with a Densitometer...................................... 4-43

Printing a Calibration Strip ....................................... 4-43

Using the Densitometer ............................................ 4-44

Linearizing the Densitometer Data ........................... 4-45

Creating a Custom Gamma Curve ............................ 4-46

Accurate Calibration Technology.................................... 4-47

Printer Margin Adjustment.............................................. 4-49

Managing Fonts on an Optional Hard Disk..................... 4-51

Chapter 5 - Configuration ........................................................... 5-1

Introduction.............................................................................. 5-3

Printer Control ......................................................................... 5-3

The Front Panel........................................................................ 5-3

The Display Window......................................................... 5-4

Front Panel Lights (LEDs) ................................................ 5-4

Front Panel Keys ............................................................... 5-5

The Configuration Menu Structure .......................................... 5-8

Selecting Menu Options .................................................... 5-8

Resetting to Factory Defaults .......................................... 5-10

The Main Menus .................................................................... 5-10

The Miscellaneous Menu ....................................................... 5-10

The Density Menu ........................................................... 5-11

The DPI Menu ................................................................. 5-12

The Gamma Menu........................................................... 5-12

The Initial Job Menu ....................................................... 5-12

The Jam Recover Menu ................................................... 5-13

The Language Menu........................................................ 5-13

The Manual Feed Menu .................................................. 5-13

The NEIT Menu .............................................................. 5-14

The RAM Disk Menu...................................................... 5-14

The Font Accelerator Menu............................................. 5-15

The Toner Page Menu...................................................... 5-15

The Screen Menu............................................................. 5-15

xiibb ____________________________________________________

The Startup Page Menu ................................................... 5-15

The Timeout Menu .......................................................... 5-16

The Tray Switch Menu .................................................... 5-16

The 1200 DPI Menu ........................................................ 5-16

The Interfaces Menu .............................................................. 5-17

The RS232 Menu............................................................. 5-17

The Enable Menu...................................................... 5-18

The Mode Menu........................................................ 5-18

The Baud Rate Menu ................................................ 5-18

The Parity Menu ....................................................... 5-18

The Flow Control Menu............................................ 5-18

The Data Bits Menu .................................................. 5-18

The Stop Bits Menu .................................................. 5-19

The Spool Menu........................................................ 5-19

The Parallel Menu ........................................................... 5-19

The Enable Menu...................................................... 5-19

The Mode Menu........................................................ 5-19

The Spool Menu........................................................ 5-19

The LocalTalk, EtherTalk, and LPR (Line Printer) Menus .......5-20

The Enable Menu...................................................... 5-20

The Mode Menu........................................................ 5-20

The Spool Menu........................................................ 5-20

The Novell PServer (Novell Print Server) Menu............. 5-21

The Enable Menu...................................................... 5-21

The Mode Menu........................................................ 5-21

The Protocol Menu ................................................... 5-21

The Spool Menu........................................................ 5-21

The Timeout Menu.................................................... 5-22

Chapter 6 - PPD Settings ............................................................. 6-1

Introduction.............................................................................. 6-3

About the PPD ......................................................................... 6-3

Selecting PPD Options............................................................. 6-3

In a Macintosh Environment ............................................. 6-4

In a Windows 95 Environment.......................................... 6-6

In a Windows 3.1 Environment......................................... 6-8

The PPD Menus ....................................................................... 6-9

Duplex ............................................................................. 6-10

Enhanced Screens............................................................ 6-10

_____________________________________________________ xiii

Fast Imaging .................................................................... 6-11

Gamma ............................................................................ 6-11

Horizontal and Vertical Image Shift................................ 6-12

Mirror Print...................................................................... 6-12

Negative Print.................................................................. 6-13

Resolution........................................................................ 6-14

Save Spooled Job............................................................. 6-15

Smooth Shading .............................................................. 6-15

Tray Switch ..................................................................... 6-16

Chapter 7 - Using Media and Toner ........................................... 7-1

Introduction.............................................................................. 7-3

Media Specifications................................................................ 7-3

Selecting Media ................................................................. 7-3

Storing Media .................................................................... 7-4

Media Sizes .............................................................................. 7-5

Standard Media Sizes ........................................................ 7-6

XANTÉ Myriad Film Sizes............................................... 7-7

Feeding Media to the Printer.................................................... 7-8

Determining the Leading Edge.......................................... 7-8

The Paper Cassettes........................................................... 7-8

The Manual Feed Tray ...................................................... 7-9

Tray Chaining.................................................................. 7-10

Using Special Media .............................................................. 7-10

Printing Computer-to-Film.............................................. 7-10

Printing Transparencies ................................................... 7-11

Printing Envelopes .......................................................... 7-12

Printing Labels ................................................................ 7-12

Printing on Custom Sized Media..................................... 7-13

Printing Double-Sided Copy.................................................. 7-14

Manual Double-Sided Copy ............................................ 7-14

Duplexing ........................................................................ 7-15

Using the Duplexer ................................................... 7-16

Handling the Toner Cartridge ................................................ 7-17

Adjusting Toner Output................................................... 7-18

Redistributing Toner ................................................. 7-18

Changing the Density Menu ..................................... 7-18

xivbb ____________________________________________________

Chapter 8- Advanced Features.................................................... 8-1

Introduction.............................................................................. 8-3

Levels of Gray.......................................................................... 8-3

Line Screens............................................................................. 8-4

Scanner Resolutions................................................................. 8-4

Line Art Scanning ............................................................. 8-4

Halftone Scanning ............................................................. 8-5

TIFF, PICT, EPS Formats ................................................. 8-5

Gamma Corrections ................................................................. 8-6

Negative Enhanced Imaging Technology ................................ 8-8

Enhanced Screening................................................................. 8-9

Font Accelerator and RAM Disk ............................................. 8-9

Accurate Calibration Technology .......................................... 8-10

Appendix A................................................................................... A-1

Appendix B................................................................................... B-1

Glossary ........................................................................................ G-1

Index ...............................................................................................I-1

◊◊◊

_________________________________________ Introduction 1-1

Chapter 1 - Introduction

Chapter Overview

The XANTÉ Accel-a-Writer 8300 ..................................................1-3

About this Manual...........................................................................1-4

Manual Conventions .......................................................................1-5

Other Helpful Documentation.........................................................1-6

About Your Printer ..........................................................................1-6

Printer Features.........................................................................1-8

PostScript Typefaces.................................................................1-9

About XANTÉ Utilities ................................................................1-10

Warranty and Product Registration ...............................................1-10

1-2 Introductionbb ________________________________________

Notes

_________________________________________ Introduction 1-3

The XANTÉ Accel-a-Writer 8300

Fig. 1.1 XANTÉ Accel-a-Writer 8300

Your new Accel-a-Writer 8300 features Adobe PostScript 3. The

high quality laser prints are excellent for everyday office needs as

well as for the demanding field of desktop publishing.

1-4 Introductionbb ________________________________________

About this Manual

This User’s Guide documents the installation, setup, and operation of

the Accel-a-Writer 8300.

Chapter 1—Introduction provides an overview of this manual, the

XANTÉ Utilities, your printer’s main features, and your printer

warranty.

Chapter 2—Installation provides instructions for unpacking and

setting up your printer, installing the paper handling and external

SCSI disk options, loading the toner and paper cassettes, and

connecting it to Macintosh and PC interfaces.

Chapter 3—Macintosh Setup describes the contents and use of the

XANTÉ Utilities CD-ROM for the Macintosh. This includes

installation instructions for the Adobe PostScript printer drivers, your

printer’s PPD, XANTÉ Command Center, XANTÉ Linearizer, the

Adobe Downloader and procedures for using many of your printer’s

innovative features.

Chapter 4—PC Setup describes the contents and use of the

XANTÉ Utilities CD-ROM for the PC. This includes installation

instructions for the Adobe PostScript printer drivers, your printer’s

PPD, XANTÉ Command Center, the XANTÉ Linearization Tool,

and procedures for using many of your printer’s innovative features.

Chapter 5—Configuration describes how to configure the default

settings for the printer features using the front panel keys and

configuration menus.

Chapter 6—PPD Settings describes the printer features that can be

set through an application’s Print dialog box using your printer’s

PPD (PostScript Printer Description file).

Chapter 7—Media and Toner describes how to select and use

various media types and sizes, how to print double-sided copies, and

how to handle your printer’s toner cartridge.

_________________________________________ Introduction 1-5

Chapter 8—Advanced Features describes XANTÉ’s NEIT

(Negative Enhanced Imaging Technology), Halftone Calibration

Technology, Font Accelerator, Enhanced Screening, and X•ACT

(XANTÉ Accurate Calibration Technology) features.

Chapter 9—Maintenance and Technical Specifications describes

how to care for your printer and contains your printer’s technical

specifications and warranty.

Appendix A—Troubleshooting provides troubleshooting tips,

gives an overview of XANTÉ service options, and describes how to

reach XANTÉ Technical Support.

Appendix B—Application Notes and Page Design provides

instructions and tips for using the printer in mainstream application

environments and some general page design tips.

Glossary—defines many terms related to your printer, XANTÉ

utilities, and the printing industry.

The Accel-a-Writer 8300 Menu quick reference sheet illustrates

the printer’s front panel menu structure and lists XANTÉ support

resources.

Manual Conventions

The following conventions are used in this manual:

Courier indicates information you must type or which

displays on screen.

↵ indicates that you need to press the Return key

on a Macintosh or the Enter key on a PC.

Note: indicates additional or emphasized information.

Caution: indicates instructions which if not followed can

or will cause damage to files or equipment.

Warning! indicates instructions which must be followed

exactly or personal injury can occur.

1-6 Introductionbb ________________________________________

Xanté Accel a Writer 8300 Postscript Level 2, Accel a Writer 8300 Postscript Level 3 User guide

Related papers

Other documents