Ohlins FGKT1084 Mounting Instruction

Öhlins Front Fork Kit for KTM EXC-F 250/ 450

FGKT 1083/1084

Application Speciﬁc Mounting Instructions

Issued 2009-10-09

Kit Contents (application speciﬁc)

Recommended Tools (application speciﬁc)

Hydraulic Stop Cup

Set-Up Data

Spring Recommendation

Part No. Pcs.

Front Fork kit FGKT 1083/1084 1

Base plug (with o-rings) 15430-04 2

Spacer 2 mm 15443-02 18

Hydraulic Stop Cup 15456-01 2

Spring Support washer N/A N/A

OEM Fork Cap Tool, socket 24 mm

Socket for OEM Base Plug 19 mm

Socket for Öhlins Base Plug 21 mm

FGKT 1084 cartridge kit comes with a Öhlins Hydraulic Stop

Cup that shall be installed according to step 10 in “Owner’s

Manual and General Mounting Instructions”.

Rebound Damping 15 clicks

Compression Damping 15 clicks

Spring Preload 1 mm

Fluid Volume (each leg) 0,370 litre

Cartridge Kit FGKT 1083/ 1084 shall be used together

with Öhlins Front Fork Springs part no. 08765-xx. For rate

recommendations, see Owner’s Manual/ General Mounting

Instructions.

Note!

The fork springs need to be ordered separately depending on the

rider’s choice of spring rate.

Part No. Pcs.

Circlip 15440-01 2

Öhlins Sticker 00197-01 2

TTX Cartridge Sticker 00191-29 2

Spring preload range -2 to 8 mm

(can be adjusted by adding/removing washers 15443-02)

Fluid volume range (each leg) 0,300 - 0,450 litre

Öhlins Front Fork uid 01312-01