Ohlins FGKT1084 Mounting Instruction

Hello! I am an AI chatbot trained to assist you with the Ohlins FGKT1084 Mounting Instruction. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!

Öhlins Front Fork Kit for KTM EXC-F 250/ 450

FGKT 1083/1084

Application Speciﬁc Mounting Instructions

Issued 2009-10-09

Kit Contents (application speciﬁc)

Recommended Tools (application speciﬁc)

Hydraulic Stop Cup

Set-Up Data

Spring Recommendation

Part No. Pcs.

Front Fork kit FGKT 1083/1084 1

Base plug (with o-rings) 15430-04 2

Spacer 2 mm 15443-02 18

Hydraulic Stop Cup 15456-01 2

Spring Support washer N/A N/A

OEM Fork Cap Tool, socket 24 mm

Socket for OEM Base Plug 19 mm

Socket for Öhlins Base Plug 21 mm

FGKT 1084 cartridge kit comes with a Öhlins Hydraulic Stop

Cup that shall be installed according to step 10 in “Owner’s

Manual and General Mounting Instructions”.

Rebound Damping 15 clicks

Compression Damping 15 clicks

Spring Preload 1 mm

Fluid Volume (each leg) 0,370 litre

Cartridge Kit FGKT 1083/ 1084 shall be used together

with Öhlins Front Fork Springs part no. 08765-xx. For rate

recommendations, see Owner’s Manual/ General Mounting

Instructions.

Note!

The fork springs need to be ordered separately depending on the

rider’s choice of spring rate.

Part No. Pcs.

Circlip 15440-01 2

Öhlins Sticker 00197-01 2

TTX Cartridge Sticker 00191-29 2

Spring preload range -2 to 8 mm

(can be adjusted by adding/removing washers 15443-02)

Fluid volume range (each leg) 0,300 - 0,450 litre

Öhlins Front Fork uid 01312-01