Winmate FM10 Product Reference Manual

Winmate FM10

Vehicle Mounted Computer

Microsoft

®

Windows

®

7 Professional for Embedded System

Product Reference Guide

Revision I

November 2015

FM10 Product Reference Guide

ii

No part of this manual may be reproduce, copied, translated, or transmitted in any form or any means, electronic or

mechanical, for any purpose, without the written permission of Winmate Communication Inc.

Trademarks

All product names, trademarks or logos mentioned herein are the properties of their respective owners.

Microsoft, Windows, and the Windows logo are either registered trademarks or trademarks of Microsoft Corporation

in the United States and/or other countries. Microsoft products are licensed to OEMs by Microsoft Licensing, Inc., a

wholly owned subsidiary of Microsoft Corporation.

The Bluetooth

®

word mark and logos are registered trademarks owned by Bluetooth SIG, Inc.

All other brand and product names are trademarks or registered trademarks of their respective owners.

Note

• Display images shown may vary slightly from actual display. Information in this manual is subject to change without

notice.

Disclaimer

Winmate Communication Inc. reserves the right to make any product changes without notice, including circuits

and/or software described or contained in this manual in order to improve design and/or performance. Winmate

Communication Inc. assumes no responsibility or liability for the use of the described product(s), conveys no

license or title under any patent, copyright, or masks work rights to these products, and makes no representations

or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise

specied. Applications that are described in this guide are for illustration purposes only. Winmate Communication

Inc. makes no representation or warranty that such application will be suitable for the specied use without further

testing or modication.

Note

• FM10 Computer has to be used with the dock.

• Use the device when located at least 20 cm (7.9 inches) away from the human body.

Warranty

Winmate Communication Inc. warrants that each of its products is free from material and workmanship defect for a

period of one year starting from the invoice date. If the customer discovers a defect, Winmate Communication Inc.

will, at its option, repair or replace the defective product at no charge to the customer, provided it is returned during

the warranty period, with transportation charges prepaid. The returned product must be properly packaged in its

original packaging to obtain warranty service.

FM10 Product Reference Guide

iii

CONTENTS

Chapter 1: Introduction ..................................................................................... 1-1

Package Contents .............................................................................................................1-2

Optional Accessories ..............................................................................................................................1-2

About This Guide ..............................................................................................................1-3

Components ......................................................................................................................1-3

Front View ..............................................................................................................................................1-3

Rear View with Vehicle Dock .................................................................................................................1-4

Sides View with Vehicle Dock ................................................................................................................1-5

Top and Bottom View .............................................................................................................................1-6

Chapter 2: Hardware ......................................................................................... 2-1

System Hardware .............................................................................................................2-1

Central Processing Unit .........................................................................................................................2-1

Input / Output Components ....................................................................................................................2-1

System Memory .....................................................................................................................................2-1

Audio Interface .......................................................................................................................................2-2

Card Slots ..............................................................................................................................................2-2

802.11 a/b/g/n

/ac ...................................................................................................................................2-2

Power ................................................................................................................................2-3

Vehicle DC Power Supply ................................................................................................................................. 2-3

External AC Power Supply .....................................................................................................................2-3

UPS Battery ...........................................................................................................................................2-4

Backup Battery .......................................................................................................................................2-4

Power Management Modes ...................................................................................................................2-4

Ignition Control ......................................................................................................................................2-5

Power Controls ................................................................................................................2-6

Power Switch .........................................................................................................................................2-6

Power Button ..........................................................................................................................................2-6

External Connectors .........................................................................................................2-7

Serial Connector (COM) .........................................................................................................................2-7

USB Connector ......................................................................................................................................2-8

CANbus / Audio Connector ....................................................................................................................2-9

CANbus Cable .......................................................................................................................................2-9

Audio Cable ..........................................................................................................................................2-11

LAN Connector (PSE) ..........................................................................................................................2-12

Power Connector ............................................................................................................2-12

Power Connector .................................................................................................................................2-13

Antenna Connections ......................................................................................................2-14

Internal WI-FI Antenna .........................................................................................................................2-14

FM10 Product Reference Guide

iv

External / Vehicle Remote Antenna ......................................................................................................2-14

Keyboard Options ...........................................................................................................2-15

Integrated Keypad ................................................................................................................................2-15

USB Keyboard / Mouse ........................................................................................................................2-15

LED Function ..................................................................................................................2-16

Connection and UPS battery LEDs ......................................................................................................2-16

Display ............................................................................................................................2-17

Touch Screen .......................................................................................................................................2-17

Display Backlight Control .....................................................................................................................2-17

Chapter 3: Software........................................................................................... 3-1

Introduction .......................................................................................................................3-1

Operating System .............................................................................................................3-1

Windows 7 Professional for Embedded System ............................................................... 3-1

Setting up Windows for the First Time ..............................................................................3-2

Setting up Windows 7 Professional for Embedded System ..............................................3-2

Creating a user name and password .....................................................................................................3-2

License Agreement ................................................................................................................................3-2

Protecting your computer .......................................................................................................................3-2

Choosing your computer’s network ........................................................................................................3-3

Completing Windows 7 Professional for Embedded System Setup .......................................................3-4

Setting up Windows 7 Professional for Embedded System ..............................................3-5

Control Panel ....................................................................................................................3-9

Using the Touch Screen .........................................................................................................................3-9

Calibrating the screen ..........................................................................................................................3-10

Display ............................................................................................................................3-12

Power Options ................................................................................................................3-12

Select a Power Plan .............................................................................................................................3-12

Region and Language .....................................................................................................3-12

Sounds ............................................................................................................................3-13

KeyMap Introduction .......................................................................................................3-14

Touch Lock ......................................................................................................................3-14

Turn On/Off the Reading Lamp .......................................................................................3-14

Volume Adjustment .........................................................................................................3-15

Brightness .......................................................................................................................3-15

Power management .............................................................................................................................3-15

Display and Keypad Backlight Brightness ............................................................................................3-15

Function Key Form to access F6~F24 ............................................................................ 3-16

Bluetooth .........................................................................................................................3-17

Opening My Bluetooth ..........................................................................................................................3-17

Bluetooth Barcode Reader Setup ........................................................................................................3-17

FM10 Product Reference Guide

v

The FM10 with Label ............................................................................................................................3-18

The FM10 without Label .......................................................................................................................3-18

Adding and Pairing a Bluetooth Device ................................................................................................3-18

WiFi .................................................................................................................................3-18

External Wi Antenna ...........................................................................................................................3-19

Connecting to a Wireless network ........................................................................................................3-19

Using Camera Features ..................................................................................................3-21

Opening the Camera ............................................................................................................................3-21

The Camera Screen .............................................................................................................................3-21

Shooting Photos ...................................................................................................................................3-22

Recording Videos .................................................................................................................................3-22

Camera Settings ..................................................................................................................................3-23

Using Recovery Wizard to Restore Computer ................................................................ 3-24

Chapter 4 - Installation ...................................................................................... 4-1

Installing a Micro SD Card ................................................................................................4-1

Installing a Stylus with the holder ......................................................................................4-2

Installing the device .........................................................................................................4-3

Vehicle Mount Installation ......................................................................................................................4-3

Docking the device .................................................................................................................................4-3

Un-docking the device ............................................................................................................................4-3

Installing the device on a forklift using RAM Mount ..........................................................4-4

Components of RAM Mounts kits ...........................................................................................................4-4

RAM Mounts assembly ..........................................................................................................................4-4

Keyboard Mounting Installation ..............................................................................................................4-5

Connecting the power cable ...................................................................................................................4-7

Power cable routing ...............................................................................................................................4-9

Appendix A - Regulatory Information ..............................................................A-1

Important Information ............................................................................................................................ A-2

Safety Information ................................................................................................................................. A-2

Informations de sécurité ....................................................................................................................... A-3

About the Adapter ................................................................................................................................. A-4

FCC Regulations ................................................................................................................................... A-5

CE Notice (European Union) ................................................................................................................. A-6

RF Exposure Information (SAR) ........................................................................................................... A-6

IC Regulations ....................................................................................................................................... A-6

Important Note ...................................................................................................................................... A-7

1-1

Chapter 1 -

1

In the warehouse environment, the ability to mount mobile devices and computers to forklifts, trucks, tuggers, and

inventory pickers, is essential. From inventory management to order fulllment, asset tracking, and shipping and

receiving, the warehouse oor is complex ecosystem that requires high-efciency technology to keep it running

smoothly.

The FM10 Vehicle Computer runs on a 1.9GHz Intel Atom E3845 of the full Windows version. The tablet features

GFG resistive touch screen with 1024 x 768 pixel resolution. The FM10 Vehicle Computer delivers exibility and

mobility in a vehicle mounted computer form factor. FM10 is designed to easily be removed from the dock with a

latch on the top of theFM10 vehicle docking. Since the dock remains attached to the vehicle, this device can easily

be moved or switched from one vehicle to another vehicle.

The integrated keyboard and physical function keys will appeal to those who prefer the usability of a full keyboard,

but in a vehicle mounted computer form factor. For wireless connectivity the tablet comes equipped with Bluetooth

4.0 and comprehensive 802.11a/b/g/n dual band WiFi, and WWAN.

This vehicle-mount computer is built to endure the rigors of the warehouse, and designed to t seamlessly into

forklifts and other warehouse vehicles

Note

• Please contact our technical support for information on the latest rmware upgrade for your tablet.

Introduction

FM10 Product Reference Guide

1-2

Package Contents

Before using this Vehicle Mounted Computer, please make sure that all the items listed below are present in your

package:

Device - FM10 Dock + latch locking

key

5 m Power Cable with

fuse kit

0.3 m USB Cable Stylus kit + Screw

98P010A000J7 98D000A00003 98K000A0005V 9484098080K0 98K000A0005T

Cable Clamp Kit WiFi Antenna x 2 User Manual Driver CD

98K000A0005W 39700010000J 9152111I100J 9171111I101R

Optional Accessories

2 m DC Jack Power

Cable

1.2 m Power Adapter

cable

3.2 m Adapter with

power cable

1.8 m RS232 Cable 0.3 m Audio Cable

94J0086020K0 922D120W12V2 98K000A0005U 94G3094090K2 94E215R060K0

1.8 m CAN BUS Y

Cable

2 m IP65 LAN Cable 4G/LTE antenna 2 dB WWAN antenna Fuse Kit

94E2150090K0 94I0080080KF 39700030002H 391000M20200 94JL01L01000

Mounting Kit for

keyboard

Device Mounting Kit Spare Key for Vehicle

Dock

Keyboard UHF Fixed Reader

98K000A0005X 98K000A0005Y 9B000000007N 9B000000007R

9B000000007Z

FM10 Product Reference Guide

1-3

About This Guide

ThisFM10 Product Reference Guide provides instruction for the system administrator to follow when conguring

and using this Vehicle Computers. This Product Reference Guide has been developed for a FM10 with Microsoft

®

Windows

®

7 Professional for Embedded System operating system.

Components

Front View

8 1

5

2

3

6

4

7

9

10

No Item Description

1 10.4” Touch Screen Displays and act as one of the inputs for the device

2

Power Button Press and hold the button for 3 second to turn on the device

Power Indicator

3 Microphone For voice communication and voice recording

4 Digital Microphone For voice communication and voice recording

5 Camera 2 Megapixel Camera

6

Light Sensor and

LED indicators

s

Light Sensor

HDD Indicators

Blanking Indicators

Heater Indicators

FM10 Product Reference Guide

1-4

7 LED indicators

WiFi Indicators

Bluetooth Indicators

UPS Battery Indicators

8 Label

Space to print the label or company logo

9 Function button

Programmable Function key that can be congured by using the HotTab Utility

10 Speaker

Emit Sound

Rear View with Vehicle Dock

3

4

1

2

No Item Description

1 VESA Mount Hole VESA 75, 100, and RAM Mount

2 Release Latch Press to release the device and the docking

3 Kensington Lock Connect to a security lock, protecting your device from being stolen

4 Power switch

Set the switch to on (I) to provide the supply power to the device and it will

automatically connect to the ignition system of the vehicle

FM10 Product Reference Guide

1-5

Sides View With Vehicle Dock

No Item Description

1 COM 11 and COM 12 Port Connect a peripheral device such as a printer or scanner with serial port

2 USB 2.0 x 2

Connect USB peripheral devices such as USB Flash drive, mouse, keyboard,

printer, etc.

3 CAN Bus/ Audio Connect to a vehicle, allowing access to wide range of vehicle data

4 Service Window To protect I/O ports

5 LAN port with PSE function

Connect to a local area network (LAN) using an Ethernet cable and provide

PSE function for POE with 48V

6 Wide Range Power Input Connect a 10-60V DC IN wide range power input

7 WWAN Antenna connector

Connect a WWAN external antenna and allow the device to be remotely

mounted on the vehicle

8 GPS Antenna connector

Connect a GPS external antenna and allow the device to be remotely mounted

on the vehicle

9 WiFi Antenna connector

Connect a WiFi external antenna and allow the device to be remotely mounted

on the vehicle

9

8

7

6

1

2

3

4

5

FM10 Product Reference Guide

1-6

Top and Bottom View

No Item Description

1 Lock Lock the tablet in place

2 Reading Light Use to provide illumination in dark environment

1

2

2-1

Chapter 2 -

2

System Hardware

Central Processing Unit

The CPU is a 1.91GHz Intel Atom E3845 processor, and the operating system of this device is Windows 7

Professional for Embedded Systeem

Input / Output Components

The FM10 device supports the following I/O components:

• SIM Card Slot

• Micro SD Card Slot

• USB 3.0

• DC In power input Jack

The Vehicle dock

of this FM10 device supports the following I/O components :

• COM Port

• USB 2.0

• CAN Bus/ Audio Connector

• LAN port

• Wide Range Power Input

System Memory

The main system memory is 4GB SODIMM DDR3L-1600 (up to 8GB)

Hardware

FM10 Product Reference Guide

2-2

Audio Interface

Your device is equipped with two speakers which are located on the bottom part of the vehicle dock. A microphone is

also available for voice communication and voice recording.

As an alternative, you can use a headset adapter cable provides a connection for headset operation. When headset

is plugged into the adapter cable, the main speakers or internal microphone will be disabled.

Card Slots

Your device has a memory card slot which accepts an SD memory card. The memory card is hot swappable.

802.11 a/b/g/n/ac

Your device has an 802.11 a/b/g/n/ac network card that can be use with internal or external antennas.

WWAN

Using a SIM card for network connection, your device supports WWAN. (Wireless Wide Area Networking)

FM10 Product Reference Guide

2-3

Power

Vehicle DC Power Supply

The Power input voltage range for the vehicle dock is between 10 to 60V DC, without the need to perform any

manual operation within the vehicle dock.

This dock provides conditioned power output for the device. By using a specied DC to DC adapter, the input voltage

of 100-240 V DC nominal can be accepted.

External AC Power Supply (optional)

If the DC power is not available, you can use an optional external UPS (Universal Input Power Supply) to convert AC

power to an appropriate DC level.

Using an external UPS and adapter cable, the AC to DC power input for the device is transferred to the vehicle dock.

To perform the connection, simply plug one end of the adapter cable to the dock and then plug the other end of the

adapter cable to the DC output cable from adapter. For Details, refer to the connection diagram shown below:

2

1

3 4

No Item

1 AC Input Cable

2 DC Output Cable

3 To DC Output Cable

4 To FM10

FM10 Product Reference Guide

2-4

UPS Battery

Your device has an UPS battery. This UPS battery is automatically charged when the device is placed on a powered

dock. The charging time takes approximately 3 hours.

When running on the UPS battery power, the power timeouts maybe different than when vehicle power is applied.

Using the UPS battery power, it allows the device to continue operation even when the device is not mounted in a

dock. The UPS battery is designed to supply power to your device for a minimum of 30 minutes.

Note

• During full loading operations without external power attached, the device will use UPS battery to

operate.

Note

• If the UPS battery power becomes critically low, the device will automatically hibernate to prevent

damage to the UPS battery.

• To turn on the device using the UPS battery power, make sure the UPS battery has at least 10% charge.

If you cannot turn the device, charge the UPS battery immediately.

• The internal UPS battery status LED and the UPS battery control panel can be used to monitor the status

of the UPS battery.

Backup Battery

Your device has a backup battery to maintain time, date, and CMOS setup information for a minimum of 2 years.

This back up battery should only be replaced by service personnel.

Power Management Modes

The FM10 has four power modes

• Full On

• Standby / Sleep

• Hibernate

• Off

• Full On Mode

When the FM10 is attached to either vehicle power or an external power supply or is operating from the UPS

battery. and the power button is pressed, the device is in the On mode. In this mode, the keypad, touch screen and

any attached peripherals will function normally. The display remains On until the display, standby or hibernate timer

expires.

When the device is in On mode, the power LED indicators is off.

FM10 Product Reference Guide

2-5

• Standby / Sleep Mode

When the Standby / Sleep timer expires without a primary event occurring, the device transitions to standby /

Sleep mode. Pressing the power button to wake up the device back to On mode.

When the device is in Standby / Sleep mode, the power LED indicator is red.

• Hibernate Mode

When the device is in Hibernate Mode, all LEDs are off. Pressing the power button to wake up the device back to

On mode.

When the device is in Hibernate mode, the power LED indicator is red.

• Off Mode

By default, the FM10 turns off if the user turns off the device through the system or presses the power button for 8

seconds with a critical shut down. The FM10 will also be off when there is no connection to a power source or the

UPS battery is depleted. However the internal RTC will keep maintaining the date and time while the device is off.

When the device is off, the power LED indicator is red.

Ignition Control

The ignition on/off delay is to prevent the computer to be instantly shut down when the vehicle ignition is turned off.

It allows the computer running for about 1 to 120 seconds (using customized software) once the ignition has been

turned on/off. Winmate Vehicle Mount Computer supporting this ignition function. To access the Ignition Software AP,

tap . When the device is removed from dock, the Ignition Software AP will be disabled, shown as .

• Software support

Winmate provides Ignition Software AP to control the timing of delay. Users are able to select 1 to 120 seconds for

each period of timing delay. To setup the timing delay please follows these steps:

On Delay: Default 10 seconds. When the system is powered on via ignition key, the system will delay 10 seconds

to power on.

Off Delay: Default 10 seconds. When the system is powered off via ignition key, the system will delay 10 seconds

to shut down.

Hard Off Delay: Default 30 seconds. When the system is powered off via ignition key, the device will cut off power

after 30 seconds.

Note

• If user do not plan on using the ignition feature connect the green wire to the vehicle’s positive power

source, see Page 4-8

FM10 Product Reference Guide

2-6

Power Controls

Power Switch

There is a power switch located on the rear side of the vehicle

dock, When the dock is connected to external power and the power

switch is on, the dock delivers power to the FM10 so the device

can be powered on

Power Button

The Power button is located at lower right of the FM10 If the FM10

is OFF, pressing the power button will start the power up sequence.

Note

• The FM10 need to be docked in a powered vehicle dock

or UPS battery has a sufcient charge to power the

device.

• If no external power is available and the UPS battery

does not have enough charge, pressing the power button

cause no action

FM10 Product Reference Guide

2-7

External Connectors

Power OFF the FM10before connecting a cable to any ports. Most of the external connectors for the FM10 are

located on the vehicle dock

• COM11 connects to a device such as printer or scanner

• COM12 connects to a device such as printer or scanner

• USB connects to USB devices such as USB ash drive,

mouse, keyboard, printer etc. this USB also accept a dongle

cable with a USB host port and a USB Client port

• CAN bus

/ Audio allows direct linking into vehicle, enable

access to wide range of vehicle data and Audio connects to a

stereo headset, external speakers or audio recording device

• LAN port supports Power over Ethernet (PoE) as a Power

sourcing equipment (PSE)

Serial Connector (COM)

Pin Signal Description

1 DCD Data Carrier Detect – Input

2 RXD Receive Data – Input

3 TXD Transmit Data – Output

4 DTR Data Terminal Ready – Output

5 GND Signal / Power Ground

6 DSR Data Set Ready – Input

7 RTS Request to send – Output

8 CTS Clear to send – Input

9 +5 VDC or RI Bar Code Scanner Power – 500mA Max

Shell C GND Chassis Ground

COM11

COM12

CANbus/Audio

USB

LAN

FM10 Product Reference Guide

2-8

USB Connector

Pin Symbols Color

CN1-1 USBVCC1 Red

CN1-2 USB1_DM White

CN1-3 USB1_DP Green

CN1-4 GND Black

CN1 Shell

CN1-6 USBVCC2 Red

CN1-7 USB2_DM White

CN1-8 USB2_DP Green

CN1-9 GND Black

CN1 Shell

Pin Signal Description

CN2-1 USBVCC1 Red

CN2-2 USB1_DM White

CN2-3 USB1_DP Green

CN2-4 Ground Black

CN3-1 USBVCC2 Red

CN3-2 USB2_DM White

CN3-3 USB2_DP Green

CN3-4 Ground Black

FM10 Product Reference Guide

2-9

CANbus / Audio Connector

The CANbus/Audio connector is a D-15 male connector located on the rear side of the Vehicle Dock. The connector

supports a headset adapter cable or a CANbus cable. The FM10 does not support connecting audio and CANbus

simultaneously.

CANbus Cable

Receptacle J1939 Female Socket J1939 Male

Pin Signal Color

1 CAN_GND CAN Ground

2 CAN_V+ Option CAN external Power Supply

3 CAN_H CAN_H bus line dominant high

4 CAN_L CAN_L bus line dominant low

5 CAN_SHLD

6 Not used

7 Not used

8 Not used

9 Not used

Page is loading ...

Winmate FM10 Product Reference Manual

Winmate FM10 Product Reference Manual

Related papers

Other documents