LG HR698D Owner's manual

OWNER’S MANUAL

Blu-ray Disc

™

Player with

built-in HDD & Twin HD Tuner

Please read this manual carefully before operating

your set and retain it for future reference.

HR698D/HR699D

P/NO : MFL65225522

www.lg.com

1 Getting Started

Getting Started 3

Getting Started

1

Safety Information

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK DO NOT REMOVE COVER (OR BACK) NO

USER-SERVICEABLE PARTS INSIDE REFER SERVICING

TO QUALIFIED SERVICE PERSONNEL.

This lightning ash with arrowhead

symbol within an equilateral triangle

is intended to alert the user to the

presence of uninsulated dangerous

voltage within the product’s

enclosure that may be of sucient magnitude to

constitute a risk of electric shock to persons.

The exclamation point within an

equilateral triangle is intended

to alert the user to the presence

of important operating and

maintenance (servicing)

instructions in the literature accompanying the

product.

WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK

HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN

OR MOISTURE.

WARNING: Do not install this equipment in a

conned space such as a book case or similar unit.

CAUTION: Do not block any ventilation openings.

Install in accordance with the manufacturer’s

instructions.

Slots and openings in the cabinet are provided for

ventilation and to ensure reliable operation of the

product and to protect it from over heating. The

openings shall be never be blocked by placing

the product on a bed, sofa, rug or other similar

surface. This product shall not be placed in a built-

in installation such as a bookcase or rack unless

proper ventilation is provided or the manufacturer’s

instruction has been adhered to.

CAUTION: This product employs a Laser System.

To ensure proper use of this product, please read

this owner’s manual carefully and retain it for future

reference. Shall the unit require maintenance,

contact an authorized service centre.

Use of controls, adjustments or the performance of

procedures other than those specied herein may

result in hazardous radiation exposure.

To prevent direct exposure to laser beam, do not try

to open the enclosure. Visible laser radiation when

open. DO NOT STARE INTO BEAM.

CAUTION concerning the Power Cord

Most appliances recommend they be placed upon

a dedicated circuit;

That is, a single outlet circuit which powers only

that appliance and has no additional outlets or

branch circuits. Check the specication page of this

owner’s manual to be certain. Do not overload wall

outlets. Overloaded wall outlets, loose or damaged

wall outlets, extension cords, frayed power cords, or

damaged or cracked wire insulation are dangerous.

Any of these conditions could result in electric

shock or re. Periodically examine the cord of your

appliance, and if its appearance indicates damage

or deterioration, unplug it, discontinue use of the

appliance, and have the cord replaced with an

exact replacement part by an authorized service

centre. Protect the power cord from physical or

mechanical abuse, such as being twisted, kinked,

pinched, closed in a door, or walked upon. Pay

particular attention to plugs, wall outlets, and

the point where the cord exits the appliance. To

disconnect power from the mains, pull out the

mains cord plug. When installing the product,

ensure that the plug is easily accessible.

Getting Started4

Getting Started

1

This device is equipped with a portable battery or

accumulator.

Safety way to remove the battery or the

battery from the equipment: Remove the

old battery or battery pack, follow the steps

in reverse order than the assembly. To prevent

contamination of the environment and bring on

possible threat to human and animal health, the

old battery or the battery put it in the appropriate

container at designated collection points. Do

not dispose of batteries or battery together with

other waste. It is recommended that you use

local, free reimbursement systems batteries and

accumulators. The battery shall not be exposed to

excessive heat such as sunshine, re or the like.

CAUTION: The apparatus shall not be exposed to

water (dripping or splashing) and no objects lled

with liquids, such as vases, shall be placed on the

apparatus.

y

The appliance is not intended for use by young

children or inrm persons without supervision.

y

Young Children should be supervised to ensure

that they do not play with appliance.

y

If the appliance is supplied from a cord

extension set or an electrical portable outlet

device, the cord extension set on electrical

portable outlet device must be positioned so

that it is not subject to splashing or ingress of

moisture.

Notes on Copyrights

y

Recording equipment should be used only for

lawful copying and you are advised to check

carefully what is lawful copying in the area

in which you are making a copy. Copying of

copyright material such as lms or music is

unlawful unless permitted by a legal exception

or consented to by the rights owner.

y

This product incorporates copyright protection

technology that is protected by U.S. patents

and other intellectual property rights. Use of

this copyright protection technology must be

authorized by Rovi Corporation, and is intended

for home and other limited viewing uses only

unless otherwise authorized by Rovi Corporation.

Reverse engineering or disassembly is prohibited.

y

CONSUMERS SHOULD NOTE THAT NOT ALL

HIGH DEFINITION TELEVISION SETS ARE FULLY

COMPATIBLE WITH THIS PRODUCT AND MAY

CAUSE ARTIFACTS TO BE DISPLAYED IN THE

PICTURE. IN CASE OF 625 PROGRESSIVE SCAN

PICTURE PROBLEMS, IT IS RECOMMENDED

THAT THE USER SWITCH THE CONNECTION

TO THE ‘STANDARD DEFINITION’ OUTPUT. IF

THERE ARE QUESTIONS REGARDING OUR TV SET

COMPATIBILITY WITH THIS MODEL 625p UNIT

PLEASE CONTACT OUR CUSTOMER SERVICE

CENTRE.

y

Because AACS (Advanced Access Content

System) is approved as content protection

system for BD format, similar to use of CSS

(Content Scramble System) for DVD format,

certain restrictions are imposed on playback,

analogue signal output, etc., of AACS protected

contents. The operation of this product and

restrictions on this product may vary depending

on your time of purchase as those restrictions

may be adopted and/or changed by AACS after

the production of this product.

y

Furthermore, BD-ROM Mark and BD+ are

additionally used as content protection systems

for BD format, which imposes certain restrictions

including playback restrictions for BD-ROM

Mark and/or BD+ protected contents. To obtain

additional information on AACS, BD-ROM

Mark, BD+, or this product, please contact an

authorized Customer Service Centre.

y

Many BD-ROM/DVD discs are encoded with

copy protection. Because of this, you should only

connect your player directly to your TV, not to a

VCR. Connecting to a VCR results in a distorted

picture from copy-protected discs.

Getting Started 5

Getting Started

1

y

Under the U.S. Copyright laws and Copyright

laws of other countries, unauthorized recording,

use, display, distribution, or revision of television

programs, videotapes, BD-ROM discs, DVDs, CDs

and other materials may subject you to civil and/

or criminal liability.

Important Notice for TV colour

system

The colour system of this player diers according to

currently playing discs.

For example, when the player plays the disc

recorded in the NTSC colour system, the image is

output as an NTSC signal.

Only the multi system colour TV can receive all

signals output from the player.

y

If you have a PAL colour system TV, you will see

just distorted images when using discs or video

contents recorded in NTSC.

y

The multi system colour TV changes the colour

system automatically according to input signals.

In case that the colour system is not changed

automatically, turn it o and then on to see

normal images on screen.

y

Even if the disc recorded in NTSC colour system

are well displayed on your TV, these may not be

recorded correctly on your recorder.

Table of Contents6

Table of Contents

1 Getting Started

3 Safety Information

8 Introduction

8 – About the “7” Symbol Display

8 – Symbols Used in this Manual

8 – Supplied Accessories

9 – Playable Discs

10 – File compatibility

11 – Regional Code

11 – AVCHD (Advanced Video Codec High

Deﬁnition)

11 – Certainy System Requirements

11 – LG Remote

11 – Compatibility Notes

12 Remote control

13 Main Unit

2 Connecting

14 Connections to Your TV

14 – Antenna connection to your TV and this

unit

15 – HDMI Connection

16 – Component Video Connection

16 – Composite connection

17 – Resolution Setting

18 Connecting to an Ampliﬁer

18 – Connecting to an Ampliﬁer via HDMI

Output

19 – Connecting to an Ampliﬁer via Digital

Audio Output

19 – Connecting to an Ampliﬁer via 2

Channel Audio Output

20 Connecting to your Home Network

20 – Wired network connection

21 – Wired Network Setup

22 – Wireless Network Connection

22 – Wireless Network Setup

25 USB device connection

25 – Playback content in the USB device

3 System Setting

26 Auto Set UP

27 Home Menu Overview

27 – Basic button operations

27 Settings

27 – Adjust the Setup Settings

28 – Settings for Digital TV

28 – Scanning programmes automatically

(Auto Tuning)

28 – Scanning programmes manually

(Manual Tuning)

29 – Editing Programme List (Channel Edit)

29 – Setting the DTV Lock

30 – Adjusting DTV Rating

30 – Setting the antenna power

30 – Setting the Timeshift

31 – [DTV] Menu

31 – [DISPLAY] Menu

33 – [LANGUAGE] Menu

33 – [AUDIO] Menu

35 – [LOCK] Menu

36 – [NETWORK] Menu

36 – [OTHERS] Menu

4 Operating

38 Using the Digital TV functions

38 – Viewing the Digital TV

38 – Changing Digital TV programmes

39 – Setting favourite programmes

39 – Viewing the programme information

39 – Selecting DTV audio language

40 – Selecting DTV subtitle language

40 – Programme Guide (Digital program

only)

41 – Using the timeshift function manually

41 – Using the timeshift function

automatically

42 – Using the teletext (Viewing Teletext)

42 Recording TV programmes

42 – Normal Recording

42 – Dual Programme Recording

43 – Timer Recording (Manual)

43 – Timer Recording (EPG)

44 – Canceling a timer recording

44 – Editing a timer recording

Table of Contents 7

1

2

3

4

5

6

44 – Instant Timer Recording

45 General Playback

45 – Playing Discs

46 – Using the disc menu

46 – Resume playback

46 – Playing the recorded titles

46 – Searching the recorded titles

47 – Sorting the recorded titles

47 – Playing content contained in the internal

hard disk drive

48 – Searching content in the hard disk drive

by entering ﬁle name

48 – Playing Blu-ray 3D disc

49 Advanced Playback

49 – Repeat Playback

50 – Repeating a speciﬁc portion

50 – Enlarge the playback image

50 – Marker Search

51 – Using the search menu

51 – Changing content list view

52 – Viewing content information

52 – Selecting a subtitle ﬁle

52 – Last Scene Memory

53 On-Screen display

53 – Displaying content information on-

screen

54 – Playing from selected time

54 – Hearing different audio

54 – Selecting a subtitle language

55 – Watching from a different angle

55 – Changing the TV Aspect Ratio

55 – Changing the Picture Mode

56 Copying

56 – Copying ﬁle(s)/folder(s) to the internal

hard disk drive

57 – Copying ﬁle(s)/folder(s) from the

internal hard disk drive to a USB storage

device

59 – Deleting a ﬁle(s)/folder(s)

59 – Naming a ﬁle/folder

60 Enjoying BD-LIVE

61 Playing movie ﬁle and VR discs

61 – Selecting a subtitle ﬁle

62 – Changing subtitle code page

62 Viewing a photo

63 – Options while viewing a photo

64 – Listening to music during a slide show

65 Listening to music

65 – Audio CD Archiving

66 – Viewing information from Gracenote

Media Database

67 – Using the Music Library

69 Playing content via your home network

(Home Link)

69 – About DLNA

70 – Accessing a DLNA media server

71 – About Nero MediaHome 4 Essentials

72 – Accessing a share folder from your PC

74 Using the Netcast

5 Troubleshooting

75 Troubleshooting

75 – General

76 – Picture

76 – Sound

77 – Network

78 – Recording

78 – Customer Support

78 – Open source software notice

6 Appendix

79 Controlling a TV with the Supplied Remote

Control

79 – Setting up the remote to control your TV

80 Area Code List

81 Language code List

82 Trademarks and Licenses

84 Network Software Update

84 – Network update notiﬁcation

84 – Software Update

86 Audio Output Speciﬁcations

88 Video Output Resolution

89 Speciﬁcations

90 Maintenance

90 – Notes on Discs

90 – Handling the Unit

91 – About the internal hard disk drive

91 Important Information Relating to Network

Services

Getting Started8

Getting Started

1

Introduction

About the “

7

” Symbol Display

“

7

” may appear on your TV display during

operation and indicates that the function explained

in this owner’s manual is not available on that

specic media.

Symbols Used in this Manual

,

Note

Indicates special notes and operating features.

>

Caution

Indicates caution for preventing possible damages

from abuse.

A section whose title has one of the following

symbols are applicable only to the disc represented

by the symbol.

BD

BD-ROM disc

DVD

DVD-Video, DVD

±

R/RW in

Video mode or VR mode and

nalized

AVCHD

DVD

±

R/RW in AVCHD format

ACD

Audio CDs

MOVIE

Movie les contained in the

Disc/USB/HDD

MOVIE-N

Movie les in the DLNA server

or PC

MUSIC

Music les contained on a

Disc/USB/HDD

MUSIC-N

Music les on a DLNA server

or PC

PHOTO

Photo les contained on a

DLNA server, PC or Disc

REC

Titles recorded via this unit

Supplied Accessories

Video cable (1) Audio cables (1)

Remote control (1) Batteries (2)

Nero MediaHome4

Essentials software CD-

ROM (1)

RF cable (1)

Getting Started 9

Getting Started

1

Playable Discs

Blu-ray Disc

y

Discs such as movies that can be

purchased or rented.

y

BD-R/RE discs that contain Movie,

Music or Photo les.

DVD-VIDEO (8 cm / 12 cm disc)

Discs such as movies that can be

purchased or rented.

DVD±R (8 cm / 12 cm disc)

y

Video mode and nalized only

y

Supports the dual layer disc also

y

Finalized AVCHD format

y

DVD±R discs that contain Movie,

Music or Photo les.

DVD-RW (8 cm / 12 cm disc)

y

VR mode, Video mode and nalized

only

y

Finalized AVCHD format

y

DVD-RW discs that contain Movie,

Music or Photo les.

DVD+RW (8 cm / 12 cm disc)

y

Video mode and nalized only

y

Finalized AVCHD format

y

DVD+RW discs that contain Movie,

Music or Photo les.

Audio CD (8 cm / 12 cm disc)

CD-R/RW (8 cm / 12 cm disc)

y

CD-R/RW discs that contain audio

titles, Movie, Music or Photo les.

y

Depending on the conditions of the

recording equipment or the CD-R/RW (or

DVD-R/RW) disc itself, some CD-R/RW (or

DVD

±

R/RW) discs cannot be played on the

unit.

y

Depending on the recording software & the

nalization, some of recorded discs (CD-R/

RW or DVD

±

R/RW) may not be playable.

y

BD-R/RE, DVD±R/RW and CD-R/RW discs

recorded using a personal computer or a

DVD or CD Recorder may not play if the

disc is damaged or dirty, or if there is dirt or

condensation on the player’s lens.

y

If you record a disc using a personal

computer, even if it is recorded in a

compatible format, there are cases in which

it may not play because of the settings of

the application software used to create the

disc. (Check with the software publisher for

more detailed information.)

y

This unit requires discs and recordings to

meet certain technical standards in order to

achieve optimal playback quality.

y

Pre-recorded DVDs are automatically set to

these standards. There are many dierent

types of recordable disc formats (including

CD-R containing MP3 or WMA les) and

these require certain pre-existing conditions

to ensure compatible playback.

y

Hybrid disc have both BD-ROM and DVD (or

CD) layers on one side. On such discs, BD-

ROM layer will be only played back in this

player.

y

Customers should note that permission

is required in order to download MP3 /

WMA les and music from the Internet.

Our company has no right to grant such

permission. Permission should always

be obtained from / guaranteed by the

copyright owner.

y

You have to set the disc format option

to [Mastered] in order to make the discs

compatible with the LG players when

formatting rewritable discs. If you set the

option to “Live System”, the disc cannot be

played on LG player. (Mastered/Live File

System : Disc format system for windows

Vista)

,

Note

Getting Started10

Getting Started

1

File compatibility

Overall

Available File extensions: “.jpg”, “.jpeg”, “.png”, “.avi”,

“.divx”, “.mpg”, “.mpeg”, “.mkv”, “.mp4”, “.mp3”,

“.wma”, “.ts”

y

There could be a variance on the available le

extensions depending on DLNA server.

y

The le name is limited to 180 characters.

y

Depending on the size and number of the les,

it may take several minutes to read the contents

on the media.

Maximum Files/Folder: Less than 2000 (total

number of les and folders)

CD-R/RW, DVD±R/RW, BD-R/RE Format:

ISO 9660+JOLIET, UDF and UDF Bridge format

MOVIE

Available resolution: 1920 x 1080 (W x H) pixels

Playable subtitle: SubRip (.srt / .txt), SAMI (.smi),

SubStation Alpha (.ssa/.txt), MicroDVD (.sub/.txt),

VobSub (.sub), SubViewer 1.0 (.sub), SubViewer 2.0

(.sub/.txt), DVD Subtitle System (.txt)

Playable Codec format: “DIVX3.xx”, “DIVX4.xx”,

“DIVX5.xx”, “XVID”, “DIVX6.xx” (Standard playback

only), H.264/MPEG-4 AVC, DIVX-HD, MPEG1 SS,

MPEG2 PS, MPEG2 TS

Playable Audio format: “Dolby Digital”, “DTS”,

“MP3”, “WMA”, “AAC”, “AC3”

y

Not all the WMA and AAC Audio formats are

compatible with this unit.

Sampling frequency: within 32-48 kHz (WMA),

within 16-48 kHz (MP3)

Bit rate: within 20-320 kbps (WMA), within 32-320

kbps (MP3)

y

HD movie les contained on the CD or USB

1.0/1.1 may not be played properly. BD, DVD

or USB 2.0 are recommended to play back

HD movie les.

y

This player supports H.264/MPEG-4 AVC

prole Main, High at Level 4.1. For a le

with higher level, there will be an warning

message on the screen.

y

This player does not support the le that

are recorded with GMC

*

1

or Qpel

*

2

. Those

are video encoding techniques in MPEG4

standard, like DivX or XVID.

*1 GMC – Global Motion Compensation

*2 Qpel – Quarter pixel

y

HD movie les that need high performance

playback could react slowly.

y

The total playback time indicated on the

screen may not be correct for .ts les.

,

Note

MUSIC

Sampling frequency: between 8 - 48 kHz (WMA),

within 11 - 48 kHz (MP3),

44.1 and 48 kHz (LPCM)

Bit rate: between 8 - 320 kbps (WMA, MP3), 768

kbps and 1.536 Mbps (LPCM)

y

This unit cannot support the ID3 Tag

embedded MP3 le.

y

The total playback time indicated on the

screen may not be correct for VBR les.

,

Note

PHOTO

Recommended size:

Less than 4,000 x 3,000 x 24 bit/pixel

Less than 3,000 x 3,000 x 32 bit/pixel

y

Progressive and lossless compression photo

image les are not supported.

y

Depending on the size and number of the photo

les, it may take several minutes to read the

contents of the media.

y

This player can not display thumbnail image in

some les.

Getting Started 11

Getting Started

1

Regional Code

This unit has a regional code printed on the rear of

the unit. This unit can play only BD-ROM or DVD

discs labelled same as the rear of the unit or “ALL”.

AVCHD (Advanced Video

Codec High Deﬁnition)

y

This player can playback AVCHD format discs.

These discs are normally recorded and used in

camcorders.

y

The AVCHD format is a high denition digital

video camera format.

y

The MPEG-4 AVC/H.264 format is capable of

compressing images at higher eciency than

the conventional image compressing format.

y

Some AVCHD discs use the “x.v.Color” format.

y

This player can playback AVCHD discs using

“x.v.Color” format.

y

Some AVCHD format discs may not be played,

depending on the recording condition.

y

AVCHD format discs need to be nalized.

y

“x.v.Color” oers a wider colour range than

normal DVD camcorder discs.

Certainy System Requirements

For high denition video playback:

y

High denition display that has COMPONENT or

HDMI input jacks.

y

BD-ROM disc with high denition content.

y

HDMI or HDCP capable DVI input on your display

device is required for some content (as specied

by disc authors).

y

For up-conversion of standard denition DVD, a

HDMI or HDCP capable DVI input on your display

device is required for copy-protected content.

For Dolby® Digital Plus, Dolby TrueHD and DTS-HD

multi-channel audio playback:

y

An amplier/receiver with a built-in (Dolby

Digital, Dolby Digital Plus, Dolby TrueHD, DTS or

DTS-HD) decoder.

y

Main, centre, surround speakers and subwoofer

as necessary for chosen format.

Compatibility Notes

y

Because BD-ROM is a new format, the can be

issues regarding certain disc, digital connection

and other compatibility issues. If you experience

compatibility problems, please contact an

authorized Customer Service Center.

y

Viewing high-denition content and up-

converting standard DVD content may require a

HDMI-capable input or HDCP-capable DVI input

on your display device.

y

Some BD-ROM and DVD discs may restrict the

use of some operation commands or features.

y

Dolby TrueHD, Dolby Digital Plus and DTS-HD are

supported with maximum 7.1 channels if you

use HDMI connection as the audio output.

y

You can use a USB device that is used to store

some disc related information, including

downloaded on-line content. The disc you are

using will control how long this information is

retained.

y

While watching 3D contents, on-screen displayed

may not be displayed properly. To display proper

on-screen display, turn o 3D mode on TV.

Getting Started12

Getting Started

1

Remote control

DISC MENU

REC.LIST

MARKER

SEARCH

ZOOM

TEXT

SUBTITLE

VOL

PR

AV/INPUT

VOL

PR

CLEAR

GUIDE

TIMER

REC.

Battery Installation

Remove the battery cover on

the rear of the Remote Control,

and insert two R03 (size AAA)

batteries with

4

and

5

matched correctly.

•• • • • • •

a

•• • • • • 

1

(Power): Switches the unit

ON or OFF.

MUTE (

@

): Mutes the sound.

OPEN/CLOSE (

B

): Opens and

closes the disc tray.

0-9 numerical buttons: Selects

numbered options in a menu.

CLEAR: Removes a mark on

the search menu or a number

when setting the password.

REPEAT: Repeats a desired

section or sequence.

TV/RADIO: Switches between

TV and radio modes.

•• • • • • •

b

•• • • • •

C/V

: Goes to next or

previous chapter/track/le.

c/v

: Searches backward

or forward.

Z

: Stops playback.

d

: Starts playback.

M

: Pauses playback or

recording.

TIME SHIFT: Activates pause

live TV/playback (timeshift) for a

live TV programme.

•• • • • • •

c

•• • • • •

GUIDE: Displays the EPG menu.

PR (

W/S

): Scans up or

down through memorized

programmes.

REC. (

X

): Starts recording.

PR LIST: Displays the Channel

list.

TIMER REC.: Displays [Timer

Recording] menu.

HOME (

n

)

: Accesses or

removes the HOME menu.

MUSIC ID

:

When the player

is connected to the network, it

can provide information about

the song played during movie

playback..

INFO/DISPLAY (

m

)

: Displays or

exits On-Screen Display.

W/S/A/D

(left/right/up/

down): Navigates on-screen

displays.

ENTER (

b

)

: Acknowledges

menu selection or displays the

TV info.

RETURN (

x

): Exits the menu

or back to previous step.

TITLE/POPUP: Displays the

DVD title menu or BD-ROM’s

popup menu, if available.

DISC MENU/REC.LIST:

Accesses menu on a disc or

switches between recording list

menu.

•• • • • • •

d

•• • • • •

Coloured (R, G, Y, B) buttons:

Use to navigate BD-ROM menus.

They are also used for [MOVIE],

[PHOTO], [MUSIC], [Home Link],

[DTV] and [Netcast] menu

.

MARKER: Marks any point

during playback.

SEARCH: Displays or exits the

search menu.

ZOOM: Displays or exits the

[Zoom] menu.

TEXT: Switches between

teletext mode and normal TV

viewing.

SUBTITLE: Selects a subtitle

language.

EXIT: Exits a menu or hides on-

screen information.

TV Control Buttons: See page

93

.

Getting Started 13

Getting Started

1

Main Unit

WIRELESS

j

a

1

(Power)

b

Disc Tray

c

Remote Sensor

d

Display window

e

T

(Play/Pause)

f

I

(Stop)

g X

(Recording)

h

Y

/

U

(Skip)/PROG.(

s

/

w

)

i

B

(Open/Close)

j

USB Port

a

ANTENNA IN

b

LAN port

c

HDMI OUT (1080p)

d

DIGITAL AUDIO OUT (COAXIAL)

e

2CH AUDIO OUT (Left/Right)

f

VIDEO OUT

g

AC IN connector

Connect the supplied power cord

h

ANTENNA OUT (TO TV)

i

COMPONENT VIDEO OUT (Y P

B

P

R

)

2 Connecting

Connecting14

Connecting

2

Connections to Your

TV

Make one of the following connections, depending

on the capabilities of your existing equipment.

y

Antenna connection (page 14)

y

HDMI connection (page 15)

y

Component Video connection (page 16)

y

Composite connection (page 16)

y

Depending on your TV and other

equipment you wish to connect, there are

various ways you could connect the unit.

Use only one of the connections described

in this manual.

y

Please refer to the manuals of your TV,

Stereo System or other devices as necessary

to make the best connections.

y

Make sure the player is connected directly

to the TV. Tune the TV to the correct video

input channel.

y

Do not connect the player’s AUDIO OUT

jack to the phono in jack (record player) of

your audio system.

y

Do not connect your player via your VCR.

The image could be distorted by the copy

protection system.

,

Note

Antenna connection to your

TV and this unit

Connect one end of the RF cable to ANTENNA

OUT(TO TV) jack on the unit and other end to

ANTENNA IN jack on your TV. Passes the signal from

the ANTENNA IN jack to your TV/monitor.

Connect the Terrestrial TV antenna to the ANTENNA

IN jack on the unit. If you want to use an indoor

antenna, use one with a signal amplier rated at 5V,

100mA and set [Antenna 5V] to [ON] in the setup

menu (See page 30).

Rear of this unit

TV

ANTENNA

RF Cable

Rear of this unit

TV

Connecting 15

Connecting

2

HDMI Connection

If you have a HDMI TV or monitor, you can connect

it to this unit using a HDMI cable (Type A, High

Speed HDMI™ Cable). Connect the HDMI jack on

the unit to the HDMI jack on a HDMI compatible TV

or monitor.

Rear of this unit

TV

Rear of this unit

TV

HDMI Cable

Set the TV’s source to HDMI (refer to TV’s Owner’s

manual).

y

If a connected HDMI device does not accept

the audio output of the unit, the HDMI

device’s audio sound may be distorted or

may not output.

y

When you use HDMI connection, you can

change the resolution for the HDMI output.

(Refer to “Resolution Setting” on page 17.)

y

Select the type of video output from the

HDMI OUT jack using [HDMI Color Setting]

option on the [Setup] menu (see page 32).

y

Changing the resolution when the

connection has already been established

may result in malfunctions. To solve the

problem, turn o the player and then turn it

on again.

y

When the HDMI connection with HDCP is

not veried, TV screen is changed to black

screen. In this case, check the the HDMI

connection, or disconnect the HDMI cable.

y

If there is noise or lines on the screen, please

check the HDMI cable (length is generally

limited to 4.5m).

,

Note

Additional Information for HDMI

y

When you connect a HDMI or DVI compatible

device make sure of the following:

y

Try switching o the HDMI/DVI device and

this player. Next, switch on the HDMI/DVI

device and leave it for around 30 seconds,

then switch on this player.

y

The connected device’s video input is set

correctly for this unit.

y

The connected device is compatible with

720x576p, 1280x720p, 1920x1080i or

1920x1080p video input.

y

Not all HDCP-compatible HDMI or DVI devices

will work with this player.

y

The picture will not be displayed properly

with non-HDCP device.

y

This player does not playback and TV screen

is changed to black screen.

Connecting16

Connecting

2

Component Video Connection

Connect the COMPONENT VIDEO OUT jacks on

the unit to the corresponding input jacks on the

TV using Y P

B

P

R

cables. Connect the left and right

AUDIO OUT jacks of the unit to the audio left and

right IN jacks on the TV using the audio cables.

TV

Rear of this unit

Component

video Cable

Audio Cable

Rear of this unit

TV

When you use COMPONENT VIDEO OUT

connection, you can change the resolution for

the output. (Refer to “Resolution setting” on

page 17.)

,

Note

Composite connection

Connect the VIDEO OUT jack on the Recorder to

the video in jack on the TV using the video cable

supplied. Connect the Left and Right AUDIO OUT

jacks on the Recorder to the audio left/right in jacks

on the TV using the supplied audio cables.

Rear of this unit

TV

Video Cable

Audio

Cable

TV

Rear of this unit

Connecting 17

Connecting

2

Resolution Setting

The player provides several output resolutions for

HDMI OUT and COMPONENT VIDEO OUT jacks. You

can change the resolution using [Setup] menu.

1. Press HOME (

n

).

2. Use

A/D

to select the [Setup] and press ENTER

(

b

). The [Setup] menu appears.

3. Use

W/S

to select [DISPLAY] option then

press

D

to move to the second level.

4. Use

A/D

to select the [Resolution] option

then press ENTER (

b

) to move to the third level.

5. Use

W/S

to select the desired resolution then

press ENTER (

b

) to conrm your selection.

Connecting18

Connecting

2

Connecting to an

Ampliﬁer

Make one of the following connections, depending

on the capabilities of your existing equipment.

y

HDMI Audio connection (page 18)

y

Digital Audio connection (page 19)

y

2CH Analogue Audio connection (page 19)

Since many factors aect the type of audio output,

see “Audio Output Specications” for details (pages

86-87).

About Digital Multi-channel sound

A digital multi-channel connection provides the

best sound quality. For this, you need a multi-

channel Audio/Video Receiver that supports one or

more of the audio formats supported by your unit.

Check the receiver manual and the logos on the

front of the receiver. (PCM Stereo, PCM Multi-Ch,

Dolby Digital, Dolby Digital Plus, Dolby TrueHD, DTS

and/or DTS-HD)

Connecting to an Ampliﬁer via

HDMI Output

Connect the player’s HDMI OUT jack to the

corresponding in jack on your amplier using a

HDMI cable. You will need to activate the player’s

digital output. (See “[AUDIO] Menu” on pages 33-

34.)

TV

Amplifier/Receiver

Rear of this unit

TV

HDMI Cable

HDMI

Cable

Amplier/Receiver

Connect the amplier’s HDMI output jack to HDMI

input jack on your TV using a HDMI cable if your

amplier has HDMI output jack.

Connecting 19

Connecting

2

Connecting to an Ampliﬁer via

Digital Audio Output

Connect the player’s DIGITAL AUDIO OUT (COAXIAL)

jack to the corresponding in jack (COAXIAL) on your

amplier.

Use an optional digital (coaxial) audio cable. You

will need to activate the unit’s digital output. (See

“[AUDIO] Menu” on pages 33-34.)

Amplifier/Receiver

Coaxial Cable

Rear of this unit

Amplier/Receiver

Connecting to an Ampliﬁer via

2 Channel Audio Output

Connect the Left and Right 2CH AUDIO OUT jacks

on the unit to the audio left and right in jacks on

your amplier, receiver, or stereo system, using

audio cables.

Amplifier/Receiver

Rear of this unit

Audio Cable

Amplier/Receiver

Connecting20

Connecting

2

Connecting to your

Home Network

This unit can be connected to a local area network

(LAN) via the LAN port on the rear panel or the

internal wireless module.

By connecting the unit to a broadband home

network, you have access to services such as

software updates, Home Link, BD-Live interactivity

and streaming services.

Wired network connection

Using a wired network provides the best

performance, because the attached devices

connect directly to the network and are not subject

to radio frequency interference.

Please refer to the documentation for your network

device for further instructions.

Connect the player’s LAN port to the corresponding

port on your Modem or Router using a

commercially available LAN or Ethernet cable (CAT5

or better with RJ45 connector). In the example

conguration for wired connection below, this

player would be able to access content from either

of the PCs.

y

When plugging or unplugging the LAN

cable, hold the plug portion of the cable.

When unplugging, do not pull on the LAN

cable but unplug while pressing down on

the lock.

y

Do not connect a modular phone cable to

the LAN port.

y

Since there are various connection

congurations, please follow the

specications of your telecommunication

carrier or internet service provider.

y

If you want to access content from PCs or

DLNA servers, this unit must be connected

to the same local area network with them

via a router.

,

Note

Rear of this unit

Broadband

Service

Router

WAN

LAN 1

LAN 2

LAN 3

PC

LAN Cable

Rear of this unit

Router

PC

Broadband

Service

Page is loading ...

LG HR698D Owner's manual

This manual is also suitable for

LG HR698D Owner's manual

Related papers

Other documents