Arctic S113 BT Owner's manual

Brand: Arctic

Model: S113 BT

Category: Portable speakers

Type: Owner's manual

Arctic S113 BT is a versatile audio device that offers multiple ways to connect and enjoy music. With Bluetooth connectivity, you can wirelessly pair your phone or other Bluetooth-enabled devices and stream music or take calls. Alternatively, you can use the included 3.5mm audio cable to connect directly to your device. The S113 BT also features NFC One Touch Pairing for quick and easy connection with compatible devices. With its compact size and carrying case, the S113 BT is perfect for taking your music on the go, whether you're at home, in the office, or outdoors.

www.arctic.ac

S113 BT

Manual

4.0

Function Diagram

Power Switch

Micro-USB Charging Port

3.5 mm Audio Input

Volume up / Next Track

Multifunction button for Answer Phone / Pairing

Volume Down / Previous Track

POWER

OFF/ON

LINE IN

Packaging Contents

Speaker x 1

Carrying Case x 1

3.5 mm Cable

(30cm) x 1

Micro USB Cable

(80cm) x 1

Manual x 1

Blue

Ÿ Blue light flashing means the speaker device is on and not

paired.

Ÿ Blue light flashing every five seconds means speaker is paired

to a device.

Red

Ÿ Red light flashing means battery is low

Ÿ Red light on constantly means charging

Red & Blue

Ÿ When both the red and the blue lights are rapidly flashing, it

means the speaker is searching for device to pair with.

LED Light Signals

1. Turn on S113 BT by sliding the power switch.

2. Activate pairing mode on your S113 BT by pressing the

Multifunction button for until the red and blue

LED's flash alternately. (Not necessary for reconnection).

3. Turn on Bluetooth on your phone and pair it with the speaker.

8 seconds

Getting Connected

The S113 BT allows you to pair with your mobile device in three

different ways:

A. Bluetooth Pairing

Example: iOS

1. Turn on S113 BT by sliding the power switch.

2. Activate pairing mode on your S113 BT by pressing the

Multifunction button for until the red and blue

LED's flash alternately. (Not necessary for reconnection).

3. Turn on Bluetooth on your phone and pair it with the speaker.

8 seconds

Switch

On Bluetooth

1. Turn on S113 BT by sliding the power switch.

2. Activate pairing mode on your S113 BT by pressing the

Multifunction button for until the red and blue

LED's flash alternately. (Not necessary for reconnection).

3. Turn on Bluetooth on your phone and pair it with the speaker.

8 seconds

Select Bluetooth

1. Turn on S113 BT by sliding the power switch.

2. Activate pairing mode on your S113 BT by pressing the

Multifunction button for until the red and blue

LED's flash alternately. (Not necessary for reconnection).

3. Turn on Bluetooth on your phone and pair it with the speaker.

8 seconds

Click Settings

Bluetooth is On

Select S113 BT

Now Connected

Example: Android 4.0

1. Turn on the S113 BT speaker by sliding the power switch.

2. Enable NFC on your mobile device.

3. Slide your phone very slowly from top to bottom across the

speaker directly above the multifunction button until you

hear a beep and a confirmation message comes up on your

mobile device.

4. Play music!

B. NFC One Touch Pairing (only for NFC enabled phones)

Notes:

Ÿ Pairing mode will last up to five minutes or until a device is

found, two tones will sound to let you know when pairing has

stopped.

Ÿ If you exceed the effective range of approx. 10M (33ft) the

speaker will disconnect and will automatically reconnect if the

speaker re-enters the effective range within ten minutes.

Bluetooth is On

Click Settings

Now Connected

Select S113 BT

Click Search

for Devices

OFF

Switch

On Bluetooth

1. Turn on S113 BT speaker by sliding the power switch.

2. Insert one end of the 3.5mm audio cable into the speaker and

the other end into your mobile device headphone's output.

3. Play music!

C. Connect via Cable

Via Bluetooth

1. Turn on Bluetooth on phone.

2. Turn on S113 BT by sliding the power switch.

3. If your device was the latest one to be paired with the S113 BT

it will connect automatically otherwise please repeat pairing

section.

Via NFC

1. Enable NFC on your phone

2. Turn on S113 BT by sliding the power button.

3. Slide your phone very slowly from top to bottom across the

speaker directly above the multifunction button (Picture) until

you hear a beep and a confirmation message comes up on

your mobile device.

Reconnection

Ÿ Volume down: one short press of the

Ÿ Next track: while music is playing, press and hold the

until the track moves to the next track.

Ÿ Previous track: while the music is playing, press and hold

the until the start of the track replays. Quickly press and

hold the again to go to the previous track.

Ÿ Pause / Play: one short press and release of the

multifunction button

Volume up: one short press of the

Music Operations

If the mobile device that is paired with the S113 BT speaker is a

cellular phone you can:

Ÿ Answer Call: one quick press of the multifunction button .

Ÿ End Call: one quick press of the multifunction button .

Ÿ Reject Call: pressing and holding the multifunction button

for three seconds or until you hear a tone that indicates this

function has been completed.

Ÿ Voice Recognition: If supported by your mobile device, turn

the voice recognition feature on, in standby mode press and

hold the multifunction button for three seconds; a tone will

sound to indicate activation. Say the name of who you would

like to call and wait for the dial tone.

Phone Operations

The S113 BT can be charged while switched on or off.

1. Insert the micro USB cable into the S113 BT and the USB side

into a power source. (We recommend the Charger Pro 4).

2. When the red LED disappears the S113 BT is fully charged.

To reset your speaker to factory settings;

1. Switch the S113 BT on.

2. Then press the and buttons simultaneously for 10

seconds until a low key beep is emitted.

3. Switch the speaker off.

It is recommended to fully charge before initial use.

Ÿ Wireless connections are affected by obstructions such as

walls and other devices.

Ÿ Keep S113 BT dry moisture may damage electronic

components.

Ÿ Exposure to high temperature will shorten the life and damage

electronic components.

Ÿ Opening / altering the S113 BT voids all product warranty.

Ÿ Rough handling may damage inside electronic components.

No part of this manual including the products described in it, may be reproduced, transmitted,

stored in a retrieval system, or translated into any language in any form or by any means,

except documentation kept by the purchaser for backup purpose, without the express written

permission of ARCTIC Switzerland AG. In no event shall ARCTIC its directors or employees be

liable for any indirect damages, incidental or consequential damages arising from any defect or

error in this manual or product.

Charging

Reset

Caution

Like us on facebook

www.facebook.com/ARCTIC.en

The aptX mark and the aptX logo are trade marks of CSR plc or one of its group companies

and may be registered in one or more jurisdictions

The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG,

Inc., and any use of such marks by ARCTIC (HK) Ltd. is under license. Other trademarks and

trade names are those of their respective owners.

FCC ID ZG8BSK10

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions:(1) this device may not cause harmful interference, and (2) this device must accept

any interference received, including interference that may cause undesired operation.

Arctic S113 BT Owner's manual

Brand: Arctic

Model: S113 BT

Category: Portable speakers

Type: Owner's manual

Download PDF

report

Arctic S113 BT Owner's manual

Arctic S113 BT Owner's manual

Related papers

Other documents