2. Computers & electronics
  3. Audio & home theatre
  4. Bluetooth music receivers
  5. Arctic
  6. S113 BT
S113 BT

Arctic S113 BT User manual

  • Hello! I am an AI chatbot trained to assist you with the Arctic S113 BT User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
  • How do I charge the Arctic S113 BT?
    How do I connect the Arctic S113 BT to my mobile device via Bluetooth?
    How do I connect the Arctic S113 BT to my mobile device via NFC?
    How do I connect the Arctic S113 BT to my mobile device via cable?
    What music operations are available on the Arctic S113 BT?
    What phone operations are available on the Arctic S113 BT?
    How do I reset the Arctic S113 BT to factory settings?
www.arctic.ac
S113 BT
Manual
EN
m.s113bt.man.arctic.ac
EN
PL
FR
DE ...
Dear Customer,
Thank you for choosing the ARCTIC S113 BT.
This smart little box allows you to bring your music
wherever you go. Lossless streaming of AAC and
mp3, aptX , bass radiators and high quality drivers
offer you a maximum of pleasure despite the small
size.
I hope you enjoy the S113 BT and we at ARCTIC
look forward to further enriching your life with our
products. If you would like to share how you use
ARCTIC's products please do so at
https://www.facebook.com/ARCTIC.en
ARCTIC is a fully carbon neutral company and your
support helps us to compensate every kilogram of
CO2 we produce. Thank You.
Sincerely,
Magnus Huber
ARCTIC CEO
Function Diagram
Power Switch
Micro-USB Charging Port
3.5 mm Audio Input
Volume up / Next Track
Multifunction button for Answer Phone / Pairing
Volume Down / Previous Track
POWER
OFF/ON
LINE IN
Packaging Contents
Speaker x 1
Carrying Case x 1
3.5 mm Cable
(30cm) x 1
Micro USB Cable
(80cm) x 1
Manual x 1
Getting Connected
The S113 BT allows you to pair with your mobile device in three
different ways:
Blue
Ÿ Blue light flashing means the speaker device is on and not
paired.
Ÿ Blue light flashing every five seconds means speaker is paired
to a device.
Red
Ÿ Red light flashing means battery is low
Ÿ Red light on constantly means charging
Red & Blue
Ÿ When both the red and the blue lights are rapidly flashing, it
means the speaker is searching for device to pair with.
LED Light Signals
Via Bluetooth
1. Switch on Bluetooth on phone.
2. Switch on S113 BT by sliding the power switch.
3. S113 BT will auto reconnect. If not the case, repeat
connection steps
Via NFC
1. Enable NFC on your phone
2. Switch on S113 BT by sliding the power button.
3. Tap your phone on the NFC tag.
Connection is automatic
Reconnection
Via Bluetooth
1. Switch on Bluetooth on phone.
2. Switch on S113 BT by sliding the power switch.
3. S113 BT will auto reconnect. If not the case, repeat
connection steps
Via NFC
1. Enable NFC on your phone
2. Switch on S113 BT by sliding the power button.
3. Tap your phone on the NFC tag.
Connection is automatic
Via Bluetooth
1. Switch on Bluetooth on phone.
2. Switch on S113 BT by sliding the power switch.
3. S113 BT will auto reconnect. If not the case, repeat
connection steps
Via NFC
1. Enable NFC on your phone
2. Switch on S113 BT by sliding the power button.
3. Tap your phone on the NFC tag.
Connection is automatic
Via Bluetooth
1. Switch on Bluetooth on phone.
2. Switch on S113 BT by sliding the power switch.
3. S113 BT will auto reconnect. If not the case, repeat
connection steps
Via NFC
1. Enable NFC on your phone
2. Switch on S113 BT by sliding the power button.
3. Tap your phone on the NFC tag.
Connection is automatic
Via Bluetooth
1. Switch on Bluetooth on phone.
2. Switch on S113 BT by sliding the power switch.
3. S113 BT will auto reconnect. If not the case, repeat
connection steps
Via NFC
1. Enable NFC on your phone
2. Switch on S113 BT by sliding the power button.
3. Tap your phone on the NFC tag.
Connection is automatic
Via Bluetooth
1. Switch on Bluetooth on phone.
2. Switch on S113 BT by sliding the power switch.
3. S113 BT will auto reconnect. If not the case, repeat
connection steps
Via NFC
1. Enable NFC on your phone
2. Switch on S113 BT by sliding the power button.
3. Tap your phone on the NFC tag.
Connection is automatic
Via Bluetooth
1. Switch on Bluetooth on phone.
2. Switch on S113 BT by sliding the power switch.
3. S113 BT will auto reconnect. If not the case, repeat
connection steps
Via NFC
1. Enable NFC on your phone
2. Switch on S113 BT by sliding the power button.
3. Tap your phone on the NFC tag.
Connection is automatic
Via Bluetooth
1. Switch on Bluetooth on phone.
2. Switch on S113 BT by sliding the power switch.
3. S113 BT will auto reconnect. If not the case, repeat
connection steps
Via NFC
1. Enable NFC on your phone
2. Switch on S113 BT by sliding the power button.
3. Tap your phone on the NFC tag.
Connection is automatic
Example: iOS
Switch
On Bluetooth
Select Bluetooth
Click Settings
A. Bluetooth Pairing
1. Switch on S113 BT by sliding the power switch.
2. Ensure that your S113 BT is not connected to another phone by
turning off Bluetooth on other devices.
3. Switch on Bluetooth on your phone and pair it with the speaker.
Example: Android 4.0
ON
ON
Bluetooth is On
Click Settings
ON
Now Connected
ON
Select S113 BT
Click Search
for Devices
OFF
Switch
On Bluetooth
Notes:
Ÿ Pairing mode will last up to five minutes or until a device is
found, two tones will sound to let you know when pairing has
stopped.
Ÿ If you exceed the effective range of approx. 10M (33ft) the
speaker will disconnect and will automatically reconnect if the
speaker re-enters the effective range within ten minutes.
Bluetooth is On
Select S113 BT
Now Connected
1. Switch on the S113 BT speaker by sliding the power switch.
2. Enable NFC on your mobile device.
3. Tap your phone on the NFC tag
and confirm the connection.
4. Play music!
B. Connection via NFC
1. Switch on the S113 BT speaker by sliding the power switch.
2. Enable NFC on your mobile device.
3. Tap your phone on the NFC tag
and confirm the connection.
4. Play music!
1. Switch on the S113 BT speaker by sliding the power switch.
2. Enable NFC on your mobile device.
3. Tap your phone on the NFC tag
and confirm the connection.
4. Play music!
1. Switch on the S113 BT speaker by sliding the power switch.
2. Enable NFC on your mobile device.
3. Tap your phone on the NFC tag
and confirm the connection.
4. Play music!
1. Switch on the S113 BT speaker by sliding the power switch.
2. Enable NFC on your mobile device.
3. Tap your phone on the NFC tag
and confirm the connection.
4. Play music!
1. Switch on the S113 BT speaker by sliding the power switch.
2. Enable NFC on your mobile device.
3. Tap your phone on the NFC tag
and confirm the connection.
4. Play music!
1. Switch on the S113 BT speaker by sliding the power switch.
2. Enable NFC on your mobile device.
3. Tap your phone on the NFC tag
and confirm the connection.
4. Play music!
1. Switch on the S113 BT speaker by sliding the power switch.
2. Enable NFC on your mobile device.
3. Tap your phone on the NFC tag
and confirm the connection.
4. Play music!
1. Switch on S113 BT speaker by sliding the power switch.
2. Insert one end of the 3.5mm audio cable into the speaker and
the other end into your mobile device headphone's output.
3. Play music!
C. Connect via Cable
Ÿ
Ÿ Volume down: one short press of the
Ÿ Next track: while music is playing, press and hold the
until the track moves to the next track.
Ÿ Previous track: while the music is playing, press and hold
the until the start of the track replays. Quickly press and
hold the again to go to the previous track.
Ÿ Pause / Play: one short press and release of the
multifunction button
Volume up: one short press of the
Music Operations
If the mobile device that is paired with the S113 BT speaker is a
cellular phone you can:
Ÿ Answer Call: one quick press of the multifunction button .
Ÿ End Call: one quick press of the multifunction button .
Ÿ Reject Call: pressing and holding the multifunction button
for three seconds or until you hear a tone that indicates this
function has been completed.
Ÿ Voice Recognition: If supported by your mobile device, turn
the voice recognition feature on, in standby mode press and
hold the multifunction button for three seconds; a tone will
sound to indicate activation. Say the name of who you would
like to call and wait for the dial tone.
Phone Operations
The S113 BT can be charged while switched on or off.
1. Insert the micro USB cable into the S113 BT and the USB side
into a power source. (We recommend the Home Charger 4500).
2. When the red LED light is off the S113 BT is fully charged.
It is recommended to fully charge before initial use.
Charging
To restore your speaker to factory settings:
1. Switch the S113 BT on.
2. Then press the and buttons simultaneously for 10
seconds until a low key beep is emitted.
3. Switch the speaker off.
Restore to Factory Settings
© 2014 ARCTIC Switzerland AG. All Rights Reserved.
No part of this manual including the products described in it, may be reproduced, transmitted,
stored in a retrieval system, or translated into any language in any form or by any means,
except documentation kept by the purchaser for backup purpose, without the express written
permission of ARCTIC Switzerland AG. In no event shall ARCTIC its directors or employees be
liable for any indirect damages, incidental or consequential damages arising from any defect or
error in this manual or product.
Like us on facebook
www.facebook.com/ARCTIC.en
© 2013 CSR plc and its group companies.
The aptX mark and the aptX logo are trade marks of CSR plc or one of its group companies
and may be registered in one or more jurisdictions
The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG,
Inc., and any use of such marks by ARCTIC (HK) Ltd. is under license. Other trademarks and
trade names are those of their respective owners.
FCC ID ZG8BSK10
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:(1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Cautions
Ÿ Wireless connections are affected by obstructions such as
walls and other devices.
Ÿ Keep S113 BT dry moisture may damage electronic
components.
Ÿ Exposure to high temperature will shorten the life and damage
electronic components.
Ÿ Opening / altering the S113 BT voids all product warranty.
Ÿ Rough handling may damage inside electronic components.
Reset
To reset your speaker
1. S113 BT can be reset while switched on or off
2. Keep pressing the and then charge the S113 BT by insert
the micro USB cable.
3. When the red LED on, the speaker is reset
/