Alpine 64 PLUS
Dear customer,
Thank you for choosing the Alpine 64 PLUS.
This is a budget CPU cooler which offers standard
users enough performance and keeps the noise
level at minimum due to the large surface area of
the heatsink and an efficient fan. The mounting
system makes the installation a quick and easy
process and offers absolute transportation safety.
I hope you enjoy this CPU cooler and we at
ARCTIC look forward to further enriching your life
with our products. If you would like to share how
you use ARCTIC's products please do so at
https://www.facebook.com/ARCTIC.en
ARCTIC is a fully carbon neutral company and your
support helps us to compensate every kilogram of
CO we produce. Thank You.
2
Sincerely,
Magnus Huber
ARCTIC CEO
Intallation Manual
www.arctic.ac
support.arctic.ac/a64plus
EN
PL
FR
DE ...
2
1
1
Installation of Alpine 64 PLUS
Caution: Do not touch the pre-applied thermal paste.
Clean the CPU carefully. Remove the residue paste by
paper tissue carefully.
Clean the CPU carefully. Remove the residue paste by
paper tissue carefully.
Preparation - Uninstall AMD stock cooler
Remove the stock cooler and the plug carefully. If the
stock cooler is sticking to the CPU, rotate it slightly.
3
Make sure the screws are sitting perfectly in the hole.
2
4
© 2014 ARCTIC Switzerland AG. All Rights Reserved.
No part of this manual including the products described in it, may be reproduced, transmitted,
stored in a retrieval system, or translated into any language in any form or by any means,
except documentation kept by the purchaser for backup purpose, without the express written
permission of ARCTIC Switzerland AG. In no event shall ARCTIC its directors or employees be
liable for any indirect damages, incidental or consequential damages arising from any defect or
error in this manual or product.
Specifications
100 WattsMax. Cooling Capacity
92mm, 600 - 2,000 RPM
(Controlled by PWM)
Fan
Fluid Dynamic BearingBearing
0.4 SoneNoise Level
0.25A / +12V DCCurrent / Voltage
115 (L) x 98 (W) x 70 (H) mmDimensions
430gNet Weight
Thermal Compound
The thermal compound is already pre-applied to the heatsink. If the cooler is
installed for a second time, we highly recommend using MX-4 from ARCTIC.
Only our compounds guarantee optimal performance in combination with the
surface of our heatsinks.
Warranty
This ARCTIC product includes a six-year limited warranty. For further
information, please consult warranty.arctic.ac
Like us on facebook
www.facebook.com/ARCTIC.en
/
