Section:
Date: Jan 2020
FRAMES AND WORKSURFACES
height-adjustable bench
Installation Guides
Rev. 0
Page: 1 of 15
HABN_124
3.1
1.7
1.11
1.3
1.8
1.6
1.9
1.2
1.4
Navigate Single-Sided Frame (HNBFNZ), Navigate Single-Sided Rectangular Extended Worksurface (HNBWES)
Section:
Date: Jan 2020
FRAMES AND WORKSURFACES
height-adjustable bench
Installation Guides
Page: 2 of 15
HABN_124
ITEM
NO.
PREVIEW
DESCRIPTION
PART NUMBER
QTY.
1. NAVIGATE SINGLE-SIDED FRAME (HNBFNZ)
1.1
LEG ASSY, STD
RANGE ELEC,
NAVIGATE
ELECTRIC HAB
N09-8583L
1
1.2
LEG ASSY, STD
RANGE ELEC,
NAVIGATE
ELECTRIC HAB
N09-8583R
1
1.3
NAVIGATE CROSS
BEAM
A16-6481\70
1
1.4
STRETCHER ASSY,
SINGLE SIDED HAB
N09-8606\30
2
ITEM
NO.
PREVIEW
DESCRIPTION
PART NUMBER
QTY.
1.5
SINGLE SIDE BENCH
REAR LEG ASSY. HAB
N09-8573L
1
1.6
SINGLE SIDE BENCH
REAR LEG ASSY. HAB
N09-8573R
1
1.7
NAVIGATE STRUT
ALU CAST 23
A25-0630\23
2
1.8
NAVIGATE STRUT
COVER
A25-0631
2
1.9
LEG TOP CAP, HAB
A25-0668
2
Part & Product Identification
Section:
Date: Jan 2020
FRAMES AND WORKSURFACES
height-adjustable bench
Installation Guides
Page: 3 of 15
HABN_124
ITEM
NO.
PREVIEW
DESCRIPTION
PART
NUMBER
QTY.
1.10
COUNTER
WEIGHT, HAB
A16-7750
8
1.11
CONTROL BOX
COVER
B02-0739
1
1.12
NAVIGATE
CONTROL
MODULE
N09-8185x
1
1.13 NAVIGATE SINGLE SIDED - HARDWARE KIT (X05-0498)
1.13.1
SCRW 1/4-20X5/8
ZNC PN QD
MCHN (690150)
E01-0992
12
1.13.2
M6x1, 14mm HEX
DRIVE, FLAT
HEAD SCREW,
ZINK FINISH
E01-1249
16
1.13.3
MACHINE
SCREW, 5/16-18 X
3/4 BUTTON
HEAD SOCKET
SCREW (690151)
E01-1035
8
ITEM
NO.
PREVIEW
DESCRIPTION
PART
NUMBER
QTY.
1.13.4
M5 X 0.8 -10, FLAT
HEAD CAP
SCREW (680214)
E01-0989
4
1.13.5
(550105) 3/16”
WIRE CLAMP, YH
ELECTRIC TABLE
B02-0598
4
1.13.6
(550092) CABLE
CLAMP 3/8
NYLON 3366 BLK
B02-0558
5
1.13.7
(690123-XM) FLAT
QUAD WD.
SCREW 6 X 5/8
TYP A ZINC
E04-0090
9
1.13.8
(690247) #10 PAN
QUAD SCRW, 2 IN
L
E01-1009
2
1.13.9
(P-2184)
GROMMET
BUSHING,
LIVELLO HEYCO
P/N: P-2184SP
B02-0557
2
1.13.10
(P-914759) LINAK
MEMORY 90 DEG.
MOUTING BRKT
A16-3970
1
1.13.11
(720025) WD
SCREW PAN
QUAD #8x5/8"
BLACK OXIDE
E04-0091
2
1.13.12
#8 X 1 1/4 WOOD
SCREW, PAN
HEAD, QUADREX
DRIVE, ZINC
E04-0074
2
Part & Product Identification
Section:
Date: Jan 2020
FRAMES AND WORKSURFACES
height-adjustable bench
Installation Guides
Page: 4 of 15
HABN_124
OR
OR
OR
AND
ITEM
NO.
PREVIEW
DESCRIPTION
PART NUMBER
QTY.
1.14
MEMORY
SWITCH
N09-5600
1
NAVIGATE
SIMPLE SWITCH
N09-8192
NAVIGATE
DIGITAL
SWITCH
N09-8183
ITEM
NO.
PREVIEW
DESCRIPTION
PART NUMBER
QTY.
2. ELECTRICS
2.1
POWER BAR
PB-NAV-N09-
8157
or
PB-NAV-N09-
8737
1
or
0
2.3
POWER BAR
HOLE COVER
B02-0736
0
or
1
2.4
POWER SUPPLY
CORD 120V-10 FT
I04-0100
2.4
MOTOR CABLE
N09-8402
2
Part & Product Identification
Section:
Date: Jan 2020
FRAMES AND WORKSURFACES
height-adjustable bench
Installation Guides
Page: 5 of 15
HABN_124
ITEM
NO.
PREVIEW
DESCRIPTION
PART NUMBER
QTY.
3. NAVIGATE SINGLE SIDED WORKSURFACE
3.1
NAVIGATE EXTENDED RECTANGULAR
WORKSURFACE, HAB
HNBWES
OR
HNBWRS
1
Part & Product Identification
Section:
Date: Jan 2020
FRAMES AND WORKSURFACES
height-adjustable bench
Installation Guides
Page: 6 of 15
HABN_124
1.2
1.3
ATTACH LEGS TO CROSS BEAM
STEP 1: Attach Leg Assembly to Cross Beam as shown above.
STEP 2: Fasten Leg Assembly to the Cross Beam with screws provided.
FASTEN LEGS TO CROSS BEAM
Section:
Date: Jan 2020
FRAMES AND WORKSURFACES
height-adjustable bench
Installation Guides
Page: 7 of 15
HABN_124
1.7
1.13.2
1.8
1.13.4
ASSEMBLE STRUT
STEP 3: Attach Struts as shown above with screws provided.
STEP 4: Attach Strut Covers with screws provided.
ATTACH STRUT COVERS
Section:
Date: Jan 2020
FRAMES AND WORKSURFACES
height-adjustable bench
Installation Guides
Page: 8 of 15
HABN_124
1.4
1.9
1.6
1.13.3
ASSEMBLE STRETCHER
STEP 5: Attach Stretcher to Frame as shown above.
STEP 6: Remove covers from Counterbalance Legs.
REMOVE COVER FROM LEG
Section:
Date: Jan 2020
FRAMES AND WORKSURFACES
height-adjustable bench
Installation Guides
Page: 9 of 15
HABN_124
1.6
1.10
1.9
ADD WEIGHTS TO COUNTERBALANCE
STEP 7: Place Counterweights inside Counterbalance Leg.
STEP 8: Attach Stretcher Bars to Legs
ATTACH STRETCHER BARS
Section:
Date: Jan 2020
FRAMES AND WORKSURFACES
height-adjustable bench
Installation Guides
Page: 10 of 15
HABN_124
2.1
2.2
2.1
POWER BAR (OPTIONAL)
STEP 9a: Attach Power Bar as shown above.
STEP 9b: Attach Power Bar Cover as shown above.
POWER BAR COVER (OPTIONAL)
Section:
Date: Jan 2020
FRAMES AND WORKSURFACES
height-adjustable bench
Installation Guides
Page: 11 of 15
HABN_124
1.13
1.12
2.4
NOTE: Make sure that the dongle is
connected to the Control Box
STEP 10: Connect all the wires as shown above.
WIRE CONNECTION
Section:
Date: Jan 2020
FRAMES AND WORKSURFACES
height-adjustable bench
Installation Guides
Page: 12 of 15
HABN_124
3.1
1.13.12
STEP 11: Place Worksurface on the Frame Assembly and fasten with screws provided. Attach the Switch under the Worksurface and fasten with screws.
ATTACH WORKSURFACE TO THE FRAME
Section:
Date: Jan 2020
FRAMES AND WORKSURFACES
height-adjustable bench
Installation Guides
Page: 13 of 15
HABN_124
1.13.8
1.11
STEP 12: Fasten screws to the Control Module as shown above. Then, attach Control Box Cover.
ATTACH CONTROL BOX COVER
Section:
Date: Jan 2020
FRAMES AND WORKSURFACES
height-adjustable bench
Installation Guides
Page: 14 of 15
HABN_124
1.13.7
1.13.5
Front View
1.13.6
1.13.7
Rear View
STEP 13: Using Wire/Cable Clips and screws, organize wires as shown above.
ATTACH CABLE CLAMPS
Section:
Date: Jan 2020
FRAMES AND WORKSURFACES
height-adjustable bench
Installation Guides
Page: 15 of 15
HABN_124
NOTE: Refer to COM_151a for Cable Organizer installation
NOTE: Refer to COM_151b for Plastic Tray Cable Management
CABLE ORGANIZER (OPTIONAL)
STEP 14a: Refer to COM_151a for Cable Organizer
STEP 14b: Refer to COM_151b for Dual Plastic Tray Cable Management
PLASTIC TRAY CABLE MANAGEMENT (OPTIONAL)
/
