Grundig DSR 6450 HD/CD User manual

Brand: Grundig

Model: DSR 6450 HD/CD

Category: TV set-top boxes

Type: User manual

This manual is also suitable for

DIGITAL

SATELLITE

RECEIVER

DSR 6450 HD/CD

DSR 6452 HD/CD

DSR 6454 HD/CD

ENGLISH

DANSK

NORSK

SVENSKA

SUOMI

CONTENTS _________________________________________

4-6 General information

4 Packing contents

4 Grundig accessories for satellite receivers

4 Receiving digital stations

5 Special features of your digital receiver

6 What is Common Interface?

7 Set-up and safety

8-9 Overview

8 The front of the digital receiver

9 The back of the digital receiver

10-12 The remote control

10 Television mode

11 PVR mode

12 Photo album

12 MP3 function

13-14 Connection and preparation

13 Connecting the satellite antenna

13 Connecting the terrestrial antenna

13 Connecting the television

13 Connecting a video recorder

13 Connecting an AV receiver or hi-fi system

13 Connecting a digital multi-channel amplifier

14 Connecting a PC

14 Connecting the mains cable

14 Inserting batteries in the remote control

15-21 Basic settings

15 The menu

16-21 Assigning preset stations

22-25 Settings

22 Parental lock

23-24 Editing the station list

25 Receiving encoded satellite stations

26-28 Basic functions

26 Switching on and off

26 Mode selection

26 Selecting preset channels

26 Adjusting the volume

27 Muting the sound

27 Selecting stations from lists

27 Switching from the current station to the previous one

27 Selecting the audio channel

28 Electronic programme guide (EPG)

ENGLISH

CONTENTS

_________________________________________________

29-42 Personal Video Recorder

29 The hard disk

30-33 Recording

34-35 Playback

36 Editing the PVR list

37-39 Photo album

40-42 MP3 function

43-49 Additional functions

43 Custom settings

44 Timer functions

45 Editing stations

46 Editing transponders

47-48 Editing satellites

49 Searching for terrestrial stations manually

50-51 Special settings

50 Deleting all stations

50 Resetting the receiver to the original state

51 Updating the digital receiver software

51 Displaying device information

51 Connecting the digital receiver to a PC

52-55 Information

52-54 Technical data

55 Troubleshooting

Packing contents

1 DSR 6450 (6452) HD/CD Digital Satellite Receiver

2 RC 54 S remote control

3 Two batteries for the remote control (2 x 1.5 V, Micro, e.g.

LR 03 or AAA)

4 Euro/AV (Scart) cable

5 USB cable

6 Operating manual

Grundig accessories for satellite receivers

Your specialist dealer will be happy to tell you about the compre-

hensive range of GRUNDIG accessories for satellite receivers.

Receiving digital stations

This DSR 6450 (6452) HD/CD digital receiver can play digital

satellite stations and digital terrestrial stations. To operate it you

need a digital satellite antenna, which must be installed and direct-

ed at the required satellite (such as Thor) and/or a digital rooftop or

indoor antenna.

Unlike analogue broadcasting, digital TV or radio stations are not

all assigned their own frequencies; instead, several TV and/or

radio are ”transmitted” by a single transponder.

To help you with the choice and settings for satellite stations, a selec-

tion of TV and radio stations have already been programmed for

you. So that all the satellite stations that have since gone on air are

available to you, you can start a station search.

Of course, you can easily program new stations yourself. You can

find the current transponder information on teletext from various

broadcasters, or look in a satellite TV guide or on the Internet.

GENERAL INFORMATION__________________

ENGLISH

Special features of your digital receiver

The DSR 6450 (6452) HD/CD digital receiver can receive and

process all unencoded and certain encoded digital satellite and ter-

restrial stations. It converts the signals from digital stations to pro-

vide outstanding audio and picture quality.

This digital receiver features a digital video recorder which has two

digital receiver units.

Independently of the station you are currently tuned to, you can

compile, record and play back your personal choice of pro-

grammes.

The digital stations are converted by the receiver unit and can be

stored on the built-in hard disk.

The large storage capacity of the hard disk (80 Gigabytes) allows

you to record up to 40 hours of material in excellent picture and

sound quality.

Function Time Shift is a special technical feature. During playback

from the hard disk you can press a button on the remote control to

simply pause the programme you are watching and resume it again

at a later time.

Using the reverse search function you can quickly find the start of

the current programme, and you can use the fast forward function

to view it in real time again.

During a recording in progress, you can select a different pro-

gramme from the archive and watch that.

The electronic TV guide also tells you of any schedule changes at

short notice, and provides an overview of all the stations’ schedules

for the next few hours.

You can call up detailed information on each TV programme at the

touch of a button.

This digital receiver has a very comprehensive, user-friendly menu

system.

The menu is displayed on the television screen, and the functions of

the remote control buttons are explained.

GENERAL INFORMATION

______________________________

What is Common Interface?

Common Interface (CI) is an interface for DVB receivers such as

digital receivers (including set-top boxes).

The digital receiver and CI modules can receive and process all

unencrypted and certain encrypted digital stations.

Encoded channels can only be viewed with a CI module suitable for

the encoding system and the appropriate smart card.

The front of the digital receiver has a Common Interface slot and

a slot for smart cards (CONAX encoding system). You can use

CI modules from various providers in the Common Interface slot.

You can insert the provider’s smart card into the CI module in order

to enable the encrypted satellite stations you want to see.

Note:

Disconnect the power plug before you insert a CI module.

GENERAL INFORMATION

______________________________

Canal Digital

ENGLISH

SET-UP AND SAFETY___________________________

°C

COMBO DIGITAL SATELLITE/TERRESTRIAL RECEIVER-PVR

-S/T

COMBO DIGITAL SATELLITE/TERRESTRIAL RECEIVER-PVR

-S/T

COMBO DIGITAL SATELLITE/TERRESTRIAL RECEIVER-PVR

-S/T

rieg im

alkan

COMBO DIGITAL SATELLITE/TERRESTRIAL RECEIVER-PVR

-S/T

AC 90-240V~

50/60Hz

50W

USB

VCR

LNB IN

IF OUT

DC 13/18V

400mA Max.

VIDEO

S/PDIFAUDIO

SERIAL PORT

ANT IN

DC 5V

30mA Max.

TV OUT

To ensure that this high quality, easy-to-use digital receiver gives

you lasting entertainment and enjoyment, please note the following

information.

This digital receiver is designed to receive, record and play back

video and audio signals. Any other use is expressly prohibited.

When setting up the digital receiver, make sure it is in a horizontal

position and that the mains socket is easily accessible.

Please note when setting up the digital receiver that furniture sur-

faces are coated with various types of paint and plastic, which often

contain chemical additives. These additives may cause corrosion to

the feet of the unit. This may leave stains on the surface of the furni-

ture which can be difficult or impossible to remove.

If the digital receiver is subject to a sudden change in temperature,

for example when brought in from the cold to a warm room,

let it stand for at least two hours before you connect it to the mains

supply.

Do not expose the digital receiver to any moisture.

The digital receiver is designed for use in dry rooms. If you do use it

outdoors, please ensure that it is protected from moisture, such as

rain or splashing water. Do not place any vessels such as vases on

the digital receiver. These may be knocked over and spill fluid on

the electrical components, thus presenting a safety risk.

Do not place the digital receiver close to heating units or in direct

sunlight, as this will impair cooling. Place the digital receiver on a

hard, level surface. Do not lay any objects such as magazines on

the digital receiver. When placed in a cabinet, make sure there is a

minimum space of 10 cm around it.

Thunderstorms are a danger to all electrical devices. Even if the

digital receiver player is switched off, it can be damaged by a

lightning strike to the mains or the antenna.

Always disconnect the mains and antenna plugs during a storm.

Never open the digital receiver casing under any circumstances.

Warranty claims are excluded for damage resulting from improper

handling.

Environmental note

This product has been made from high-quality parts and materials

which can be re-used and recycled.

Therefore, do not throw the product away with normal household

waste at the end of its life. Take it to a collection point for recycling

electrical and electronic devices. This is indicated by this symbol on

the product, in the operating manual and on the packaging.

Please find out about collection points operated by your local

authority.

Help protect the environment by recycling used products.

The front of the digital receiver

1 Smart card slot (CONAX encoding system, channel “Canal

Digital”) for inserting a smart card.

2 Common Interface slot for inserting a CI module.

ǼǼ

/I Switches the digital receiver on and off to standby mode.

MENU Opens and closes the main menu.

OK Opens the station list.

In the menus: confirm entries.

∧∧

∨∨

Switch channels up and down one by one.

In the menus: move the cursor up/down, select and change

individual entries.

Change the volume.

In the menus: move the cursor left/right, select and change

individual entries.

OVERVIEW____________________________________________

ENGLISH

OVERVIEW

_________________________________________________

The back of the digital receiver

USB USB interface for data transfer.

VCR Euro AV socket (input and output) for the video

recorder.

TV Euro AV (output) socket for the television.

LNB IN Antenna socket for the satellite antenna.

IF OUT Antenna socket (output) for a second satellite

receiver.

L R Left/right stereo output sockets (cinch) for the

AUDIO hi-fi system.

VIDEO Video signal output socket (FBAS) for television

or AV receiver.

S/PDIF Audio output socket for digital audio signal (cinch)

for digital multi-channel amplifier.

SERIAL PORT Serial interface for data transfer.

ANT IN Antenna socket for digital terrestrial antenna.

IF OUT Socket for loop cable to television or video

recorder.

AC 90-240V~

50/60Hz

50W

USB

VCR

LNB IN

IF OUT

DC 13/18V

400mA Max.

VIDEO

S/PDIFAUDIO

SERIAL PORT

ANT IN

DC 5V

30mA Max.

TV OUT

THE REMOTE CONTROL _____________________

Television mode

Ǽ Switches the digital receiver to standby, and from

standby to the channel last selected.

ı Switches the sound to mute and on again.

Selects the audio channel and default volume.

w Selects the sleep timer and the switch-off time.

Opens the »Aspect Ratio« menu.

X Switches between digital receiver mode and the

audio and video signals from the device connected to

the »VCR« socket.

MENU Opens the main menu.

EXIT Quits the menu.

Ń Switch channels up and down one by one.

CH Ľ

VOL Adjust the volume.

ı VOL

OK Opens the station list.

EPG Calls up the TV guide.

Displays programme information.

P- Select the next menu page.

P+

RED Switches between TV and radio mode.

GREEN Opens the list of favourites.

YELLOW Opens the satellite/terrestrial selection.

BLUE Opens the group selection.

y Opens the »Subtitles« menu.

ķ Calls up teletext.

Enlarges the screen picture (zoom function).

Selects video mode, if provided by the station.

RC 54 S

EXIT

EPG

VOL VOL

REC PVR

P+

OK/

CH UST

Time Shift

FAV LIST

A-B

ABC

DEF

GHI

JKL

MNO

PQRS

TUV

WXYZ

ENGLISH

1 ... 0 Select stations.

Enter letters.

? Selects the »Message« function.

Switches between the two most recently selected

channels.

Personal Video Recorder

PVR Opens the »PVR List«.

Press »Q« and then CH Ń or CH Ľ to select PVR,

MP3 or Photo.

PVR mode

REC Starts recording.

P- Pause during recording.

P+ Index functions during recording or playback.

Shows the information bar.

Press twice: displays the help menu.

■

Stop – return to television signal.

4 Playback

$ Pause during playback.

Time Shift during live signal.

W Fast forward

Q Fast rewind

9 Time shift 15 seconds forward.

8 Time shift 15 seconds back.

$R Slow motion forward.

E$ Slow motion reverse.

Repeat the current video file.

A-B Repeats a section of a recorded programme.

? Shows the index list in playback mode.

THE REMOTE CONTROL

________________________________

RC 54 S

EXIT

EPG

VOL VOL

REC PVR

P+

OK/

CH UST

Time Shift

FAV LIST

A-B

ABC

DEF

GHI

JKL

MNO

PQRS

TUV

WXYZ

Photo album

ľ VOL, CH Ń Move the picture section.

ı VOL, CH Ľ

OK Displays the photo album list when a picture is

shown.

Shows the selected picture in the photo album.

Shows the information bar.

Press twice: displays the help menu.

■

Stop – return to television signal.

4 Starts the slide show when a photo is shown.

$ Stops the slide show.

Q Enlarges the current photo.

W Reduces the current photo.

8 Selects the previous photo.

9 Selects the next photo.

MP3 function

OK Displays the MP3 list when playing a file.

Plays the selected file from the MP3 list.

Displays the help menu.

■

Stop – return to television signal.

4 Resumes playback of the selected MP3 file after it

has been paused.

$ Pause

Q Reverse search.

W Forward search.

$R Time shift 15 seconds forward.

E$ Time shift 15 seconds back.

8 Selects the previous MP3 file.

9 Selects the next MP3 file.

Repeats the current MP3 file.

A-B Repeats a section of an MP3 file.

THE REMOTE CONTROL

________________________________

RC 54 S

EXIT

EPG

VOL VOL

REC PVR

P+

OK/

CH UST

Time Shift

FAV LIST

A-B

ABC

DEF

GHI

JKL

MNO

PQRS

TUV

WXYZ

ENGLISH

Connecting the satellite antenna

1 Connect the antenna cable of the satellite antenna to the »LNB IN«

socket on the digital receiver. (Screw connection, F connector).

You can connect a second satellite receiver to the »IF OUT« socket.

Connecting a terrestrial antenna

1 Connect the antenna cable of the indoor or outdoor antenna to the

»ANT IN« socket on the digital receiver.

Note:

When connecting an indoor antenna you may have to try it out at

different positions until you get the best reception.

2 Connect the »OUTPUT TER.« socket on the digital receiver via an HF

cable to the antenna socket on the television (loop-through function for

analogue stations).

Connecting the television

1 Plug the Euro-AV (Scart) cable supplied into the »TV« socket on the digital

receiver and the corresponding Euro-AV socket (e.g. EURO-AV, SCART)

on the television.

Connecting a video recorder

1 Plug a standard Euro-AV (Scart) cable into the »VCR« socket on the

digital receiver and the Euro-AV socket (e.g. EURO-AV, LINE IN/OUT,

EXT.1) on the video recorder.

Note:

When playing back a video recording, the video and audio signal from

the video recorder is automatically looped through to the television via

the »TV« socket on the digital receiver.

Connecting an AV receiver or hi-fi system

1 Plug a standard cinch cable into the »VIDEO« and »L R AUDIO«

sockets (left/right) on the digital receiver and the corresponding input

sockets on the AV receiver or hi-fi system.

Connecting a digital multi-channel amplifier

1 Plug a standard cinch cable into the »S/PDIF« socket on the digital

receiver and the corresponding socket on the digital multi-channel

amplifier.

CONNECTION AND PREPARATION__

VCR

LNB IN

IF OUT

DC 13/18V

400mA Max.

VIDEO

S/PDIFAUDIO

SERIAL PORT

ANT IN

DC 5V

30mA Max

TV OUT

VCR

LNB IN

IF OUT

DC 13/18V

400mA Max.

VIDEO

S/PDIFAUDIO

SERIAL PORT

ANT IN

DC 5V

30mA Max.

TV OUT

VCR

LNB IN

IF OUT

DC 13/18V

400mA Max.

VIDEO

S/PDIFAUDIO

SERIAL PORT

ANT IN

DC 5V

30mA Ma

TV OU

VCR

LNB IN

IF OUT

DC 13/18V

400mA Max.

VIDEO

S/PDIFAUDIO

SERIAL PORT

ANT IN

DC 5V

30mA Ma

TV OU

LNB IN

IF OUT

DC 13/18V

400mA Max.

VIDEO

S/PDIFAUDIO

SERIAL PORT

ANT IN

DC 5V

30mA Max.

TV OUT

LNB IN

IF OUT

DC 13/18V

400mA Max.

VIDEO

S/PDIFAUDIO

SERIAL PORT

ANT IN

DC 5V

30mA Max.

TV OUT

Connecting a PC

1 Connect the USB cable of the PC to the »USB« socket on the digital

receiver. (Data transfer and downloading software).

Connecting a PC

1 Connect the serial cable of the PC to the »SERIAL PORT« socket (RS 232)

on the digital receiver. (Downloading software).

Connecting the mains cable

1 Plug the mains cable into the wall socket.

Inserting batteries in the remote control

1 Open the battery compartment by removing the lid.

2 Insert the batteries (micro type, e.g. LR 03 or AAA, 2 x 1.5 V).

Observe the polarity (marked on the base of the battery compartment).

3 Close the battery compartment.

Note:

If the digital receiver no longer reacts properly to remote control

commands, the batteries may be flat. Be sure to remove used batteries.

The manufacturer accepts no liability for damage resulting from leaking

batteries.

Environmental note

Batteries, including those which contain no heavy metals, may not be

disposed of with household waste. Please dispose of used batteries in an

environmentally sound manner. Find out about the legal regulations

which apply in your area.

CONNECTION AND PREPARATION

_________________

AC 90-240V~

50/60Hz

50W

USB

VCR

LNB

IF O

DC 13

400mA

VCR

LNB IN

IF OUT

DC 13/18V

400mA Max.

VIDEO

S/PDIFAUDIO

SERIAL PORT

ANT IN

DC 5V

30mA Max.

TV OUT

ENGLISH

The menu

This digital receiver has a very comprehensive, user-friendly menu

system. The menu is displayed on the television screen.

The digital receiver responds to many functions which you select on

the remote control with informative menus and icons on the televi-

sion screen.

It enables you to select many different settings and contains infor-

mation on using your digital receiver.

The buttons on the remote control for using the menu are explained

on the screen.

The main menu contains the most important controls for your digital

receiver.

Press »MENU« to open the main menu. Press »

ľ VOL« or

»ı VOL« and to navigate in the menu and select the submenu.

When you confirm your selection with »OK« you can navigate in

that submenu. Press »CH

Ľ« or »CH Ń« to select the menu item.

Press »OK« to confirm. Normally another menu then appears,

where you can use »CH

Ľ« or »CH Ń« to navigate and make the

setting. Make settings using »ľ VOL«, »ı VOL«, »CH Ľ« or

»CH Ń«.

You can also use the drop-down menu to make settings. Select the

setting and then press »OK«. Press »CH

Ľ« or »CH Ń« to make

the setting and press »OK« to confirm:

Press »MENU« to quit the current menu level.

Press »EXIT« to quit the menu entirely.

BASIC SETTINGS __________________________________

Assigning preset stations

The digital receiver is already programmed with satellite stations,

depending on the language you select.

In the following settings, you select the language for the menu,

sound, subtitles and teletext. Adapt the digital receiver to your tele-

vision and configure the tuner.

The preset stations and those found by the automatic search are

added to the channel list. You can then sort the stations in the order

you require.

1 Switch on the digital receiver by pressing »

Ǽ/I« on the

receiver.

– The »Reset« menu appears when the device is first switched

on.

Selecting the country

Note:

The »Reset« menu is in the main menu under »System Informa-

tion«.

1 Press »

ľ VOL« or »ı VOL« to select your country.

2 Select »Start« with »CH

Ľ« or »CH Ń« and press »OK« to

confirm.

– The »Language Settings« menu appears.

Language setting

Note:

The »Language Settings« menu is in the main menu under

»User Setting«.

1 Select the menu items with »CH

Ľ« or »CH Ń«.

2 Press »

ľ VOL« or »ı VOL« to select the language

3 Press »OK« to open the drop-down menu and press »CH

Ľ«

or »CH Ń« to select the language, then press »OK« to confirm.

– »Menu Language«: The language for the on-screen dis-

play (OSD).

– »Main Audio«: The preferred language for pro-

grammes with multi-channel sound.

– »Second Audio«: The alternative language for pro-

grammes with multi-channel sound,

if the language of the first audio

track is not broadcast.

BASIC SETTINGS

________________________________________

ENGLISH

BASIC SETTINGS

________________________________________

– »Main Subtitle«: The preferred language for pro-

grammes with subtitles.

– »Second Subtitle«: The alternative language for pro-

grammes with subtitles, if the language

of the main subtitles is not broadcast.

– »Teletext«: The language for teletext.

4 Press »MENU« to go to the next setting.

Selecting the television picture format

Note:

The »TV Output« menu is in the main menu under »User

Setting«.

You can also select the »Aspect Ratio« menu by pressing

«.

1 Press »

ľ VOL« or »ı VOL« to select the picture format.

– »4:3 Full«: Setting for a television or flat screen in

4:3 format.

Wide-screen pictures fill the screen

without black bars at the top and bot-

tom.

– »16:9 Full«: Setting for a television or flat screen in

16:9 format.

– »4:3 Center«: Setting for a television or flat screen in

4:3 format.

Picture fills the screen with the left and

right edges slightly cropped.

– »4:3 LetterBox«: Setting for a television or flat screen in

4:3 format.

Wide-screen pictures are shown with

black bars at the top and bottom.

Setting the contrast

1 Select »Contrast« by pressing »CH Ľ« or »CH Ń«.

2 Set the contrast with »

ľ VOL« or »ı VOL«.

Selecting Dolby Digital*

If you select Dolby Digital »On« you can enjoy Dolby Digital sound,

as long as it is supported by the current programme.

If the current programme is broadcast in digital multi-channel

sound, the »

=« symbol is displayed in the programme informa-

tion.

Before you can enjoy Dolby Digital sound, you must connect the

»S/PDIF« socket to a multi-channel amplifier.

1 Select »Dolby Digital« by pressing »CH

Ľ« or »CH Ń«.

2 Press »

ľ VOL« or »ı VOL« to select »On«.

Specifying the video signal at the Euro AV (TV)

output

You can choose »CVBS« (normal picture quality), »RGB« (high

picture quality) or »S-VIDEO« (high picture quality). The default

setting is »RGB«.

1 Select »Video Output« by pressing »CH

Ľ« or »CH Ń«.

2 Press »

ľ VOL« or »ı VOL« to select »FBAS« or »RGB«.

– You cannot select the S-VIDEO signal, because it is always

transmitted by the Euro AV output (TV).

3 Press »MENU« to go to the next setting.

Setting the local time

You must select a time zone so that the electronic programme guide

always shows you the current programmes at the right time.

Note:

The »Local Time Setup« menu is in the main menu under

»User Setting«.

1 Press »

ľ VOL« or »ı VOL« to select your country.

Note:

The »Local Time« item is for information only and cannot be

selected.

2 Press »MENU« to go to the next setting.

BASIC SETTINGS

________________________________________

* Under license from Dolby Laboratories Licensing Corporation.

DOLBY and the Double-D symbol

ĳ are registered trademarks of the

Dolby Laboratories Licensing Corporation.

ENGLISH

LNB setting

You must configure the LNB settings of the receiver according to

your LNB type.

If your satellite antenna is pointed at the THOR satellite and

equipped with a universal LNB, you do not need to change any-

thing.

Note:

The »LNB Setup« menu is in the main menu under »Installa-

tion«.

1 Press »CH

Ľ« or »CH Ń« to select the item and then press

»OK«.

2 Select the required settings by pressing »CH

Ľ« or »CH Ń«

and press »OK« to confirm.

3 Once you have entered all the settings, press »CH

Ľ« or

»CH Ń« to select »Store« and then press »OK« to confirm.

Note:

If you do not intend to use the pre-programmed stations, press

»RED« to enter the »Search setup« menu directly and start a

search.

4 Press »MENU« to go to the next setting.

Automatic satellite station search

During the automatic search, the system searches for stations on all

transponders.

1 Select »Number of Antenna« with »CH

Ľ« or »CH Ń« and

press »ľ VOL« or »ı VOL« to enter the number of antennas.

Notes:

If your receiver is connected to a DiSEqC system, set the number

of antennas and the current antenna accordingly.

Example: if your receiver is connected to three antennas, select

3 under »Number of antenna« and then assign the satellite

name to the current antenna.

2 Select »Current Antenna« with »CH

Ľ« or »CH Ń« and press

»ľ VOL« or »ı VOL« to select the first antenna.

Notes:

If you only have one antenna, you cannot make any changes

here.

BASIC SETTINGS

________________________________________

3 Select »Satellite Name« with »CH Ľ« or »CH Ń« and press

»ľ VOL« or »ı VOL« to select the satellite at which the

antenna is directed.

Notes:

If several antennas are connected, set »Current antenna« to

»2« and assign this antenna to the satellites.

4 Select »LNB Type« with »CH

Ľ« or »CH Ń« and press

»ľ VOL« or »ı VOL« to enter the LNB type.

5 Select »TP« with »CH

Ľ« or »CH Ń« and press »ľ VOL« or

»ı VOL« to select the transponder.

Notes:

Press the green button to edit the transponders. Press the yellow

button to add a new transponder.

6 Select »Search Type« with »CH

Ľ« or »CH Ń« and press

»ľ VOL« or »ı VOL« to select the type of search.

7 Select »FTA/CAS type« with »CH

Ľ« or »CH Ń« and press

»ľ VOL« or »ı VOL« to select the FTA/CAS type.

Notes:

If you select »All« or »CAS«, you can select the CAS system

after pressing the green button.

8 Select »Search Current ANT« or »Search All ANT« with »CH

Ľ« or »CH Ń« and press »OK« ´to start the search.

– The »Search Channels« page appears.

9 When the message »Search Completed Press OK« appears,

press »OK«.

10 Press »MENU« to return to the »Search setup« menu, or

»EXIT« to go to the next setting.

BASIC SETTINGS

________________________________________

Page is loading ...

Grundig DSR 6450 HD/CD User manual

Brand: Grundig

Model: DSR 6450 HD/CD

Category: TV set-top boxes

Type: User manual

This manual is also suitable for

Download PDF

report

Grundig DSR 6450 HD/CD User manual

This manual is also suitable for

Grundig DSR 6450 HD/CD User manual

Related papers

Other documents