2. Crystorama
  3. DAN-406-PN
DAN-406-PN

Crystorama DAN-406-PN User manual

  • Hello! I am an AI chatbot trained to assist you with the Crystorama DAN-406-PN User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
ASSEMBLYINSTRUCTIONMODEL#DAN-406-PN
CRYST
RAMA
WARNING:
ElectricalDanger TurnPoweroff
WARNING: ThisproductcanexposeyoutoLead
whichisknowntothestateofCaliforniatocausecancer
and/orbirthdefectsorreproductiveharm.Formore
informationgotowww.P65Warnings.ca.gov
L I G H T I N GT H EW A YF O RS I X T YY E A R S
installedbyalicensedelectrician
inaccordancewiththeNational
Allelectricalcomponentsmustbe
ElectricCodeandtheappropriate
localelectricalcodes.
6”
12”
1Pc
3Pcs
ROD2=
ROD1=
Howtoinstall
Crystorama.com
3.Determinethepreferredhangingheightandadjust
therequiredrods.
5.Slipcanopykitalongwireandthreaditintothetop
oftherodassembly.
8.Installthebulbs(notincluded)intothesocket.
4.Feedthewiresthroughtherodsandconnectthem
together.
Youwillneed6-CandelabraBaseBulb
40WattsRecommended60WattsMax.
USELEDBULBSFOREXTENDEDUSE
This fixture is Dry rated
5-7/8”
1”
17”
24-3/4”
FABRICSHADE 13-1/4”
24-1/4”
ROD1
ROD2
61-3/4”
ROD
COUPLING
FABRICSHADE
CENTER
ROD
LIGHTCLUSTER
CLIP
METALFRAME
CANDLESLEEVE
1.Slipthecenterrodassemblyalongwireandthread
ontothenipplelocatedonthetopofthelightcluster.
2.Slidethefabricshadeinsidethemetalframeand
secureitwithclips.
6.Installthemountingscrewsintothematching
holesinthemountingbar.Securethemounting
bartotheoutletboxwiththeoutletboxscrews.
7.Raisecanopyallowingthemountingscrewsto
protrudethroughtheholesinthecanopy,and
securewiththeballnut.
NOTE : HIDETHESEAMSOFTHESHADEBYALIGNING
ITWITHAVERTICALMETALBAR.
CRYST
RAMA
L I G H T I N GT H EW A YF O RS I X T YY E A R S
PartNumber
PartNumbers
A.(1)-Mountinghardware
B.(1)-CanopykitW5-7/8’’xH1’’ #XRF404PNCAN5.875IN
F.(1)-CenterrodW1/2’’xL9-1/4’’ #XRF406PNSTEM9.25IN
E.(3)-RodD5/8’’xL12’’ #XRF404PNROD12IN
C.(2)-Ballnut#XRF400PNBANUT
D.(1)-RodD5/8’’xL6’’ #XRF404PNROD6IN
ASSEMBLYINSTRUCTIONMODEL#DAN-406-PN
H.(6)-CandlesleeveW7/8’’xL2-3/8’’
Crystorama.com
A
B
C
D
E
F
G
H
I
G.(1)-FabricshadeW24-1/4’’xH13-1/4’’ #XRF406SHA24.25IN
I.(1)-Metalframe
/