Skunk2 RACING Intake Manifold K20A3 User manual

Brand
Skunk2 RACING
Model
Intake Manifold K20A3
Type
User manual

Skunk2 RACING Intake Manifold K20A3

This high-performance intake manifold is designed to improve airflow and increase horsepower and torque for K20A3 engines. It features a larger plenum volume, optimized runner lengths, and a unique tumble flap design that promotes better air/fuel mixing. The manifold is constructed from lightweight aluminum for improved durability and comes with all necessary hardware for installation.

Here are some of the benefits of installing a Skunk2 RACING Intake Manifold K20A3:

  • Increased horsepower and torque
  • Improved airflow
  • Enhanced throttle response
  • Better fuel economy

Skunk2 RACING Intake Manifold K20A3

This high-performance intake manifold is designed to improve airflow and increase horsepower and torque for K20A3 engines. It features a larger plenum volume, optimized runner lengths, and a unique tumble flap design that promotes better air/fuel mixing. The manifold is constructed from lightweight aluminum for improved durability and comes with all necessary hardware for installation.

Here are some of the benefits of installing a Skunk2 RACING Intake Manifold K20A3:

  • Increased horsepower and torque
  • Improved airflow
  • Enhanced throttle response
  • Better fuel economy
Report a problem with this article
Intake Manifold Removal and Installation (K20A3)
Intake Manifold Removal and Installation
Exploded View - K20A3 Engine
Removal - K20A3 Engine
1. Remove the intake manifold cover.
2006 Acura RSX • MotoLogic https://www.motologic.com/car/ec50af00-3e3c-012c-0349-19005f6e69d...
1 of 15 8/5/2022, 10:02 PM
2. Disconnect the intake air temperature (IAT) sensor connector (A), and remove the breather hose (B), then
remove the air cleaner housing (C).
3. Remove the throttle cover (A). Fully open the throttle link and cruise control link by hand, then remove the
throttle cable (B) and cruise control actuator cable (C) from the links. Loosen the locknuts (D), and remove the
cables from the bracket.
2006 Acura RSX • MotoLogic https://www.motologic.com/car/ec50af00-3e3c-012c-0349-19005f6e69d...
2 of 15 8/5/2022, 10:02 PM
4. Remove the evaporative emission (EVAP) canister hose (A) and brake booster vacuum hose (B).
2006 Acura RSX • MotoLogic https://www.motologic.com/car/ec50af00-3e3c-012c-0349-19005f6e69d...
3 of 15 8/5/2022, 10:02 PM
5. Remove the water bypass hoses, then plug the water bypass hoses.
6. Disconnect the intake manifold tuning (IMT) (intake manifold runner control (IMRC)) valve actuator control
solenoid valve connector (A), then remove the positive crankcase ventilation (PCV) hose (B) and IMT (IMRC)
2006 Acura RSX • MotoLogic https://www.motologic.com/car/ec50af00-3e3c-012c-0349-19005f6e69d...
4 of 15 8/5/2022, 10:02 PM
valve control solenoid valve mounting bolt (C).
7. Remove the front bumper.
8. Disconnect the hood switch connector (A), then remove the air conditioning (A/C) line bracket mounting bolt
(B), intake air duct mounting bolt (C), and harness clamps (D).
2006 Acura RSX • MotoLogic https://www.motologic.com/car/ec50af00-3e3c-012c-0349-19005f6e69d...
5 of 15 8/5/2022, 10:02 PM
9. Remove the upper bracket and cushion mounting bolts (A), then remove the bulkhead (B).
10. Remove the engine wire harness connectors and wire harness clamps from the intake manifold.
◦ Idle air control (IAC) valve connector
◦
Throttle position (TP) sensor connector
◦ Manifold absolute pressure (MAP) sensor connector
◦
Evaporative emission (EVAP) canister purge valve connector
◦ Intake manifold tuning (IMT) (Intake manifold runner control (IMRC)) valve position sensor connector
2006 Acura RSX • MotoLogic https://www.motologic.com/car/ec50af00-3e3c-012c-0349-19005f6e69d...
6 of 15 8/5/2022, 10:02 PM
11. Remove the intake manifold.
2006 Acura RSX • MotoLogic https://www.motologic.com/car/ec50af00-3e3c-012c-0349-19005f6e69d...
7 of 15 8/5/2022, 10:02 PM
Installation - K20A3 Engine
1. Install the intake manifold (A), and tighten the bolts/nuts in a crisscross pattern in two or three steps, beginning
with the inner bolt. Use new O-rings (B).
2006 Acura RSX • MotoLogic https://www.motologic.com/car/ec50af00-3e3c-012c-0349-19005f6e69d...
8 of 15 8/5/2022, 10:02 PM
2. Install the bulkhead (A), then install the upper bracket and cushion mounting bolts (B).
2006 Acura RSX • MotoLogic https://www.motologic.com/car/ec50af00-3e3c-012c-0349-19005f6e69d...
9 of 15 8/5/2022, 10:02 PM
3. Connect the hood switch connector (A), then install the A/C line bracket mounting bolt (B), intake air duct
mounting bolt (C) and harness clamps (D).
4. Install the front bumper.
2006 Acura RSX • MotoLogic https://www.motologic.com/car/ec50af00-3e3c-012c-0349-19005f6e69d...
10 of 15 8/5/2022, 10:02 PM
5. Connect the IMT (IMRC) valve actuator control solenoid valve connector (A), then install the PCV hose (B) and
IMT (IMRC) valve actuator control solenoid valve mounting bolt (C).
2006 Acura RSX • MotoLogic https://www.motologic.com/car/ec50af00-3e3c-012c-0349-19005f6e69d...
11 of 15 8/5/2022, 10:02 PM
6. Install the water bypass hoses.
2006 Acura RSX • MotoLogic https://www.motologic.com/car/ec50af00-3e3c-012c-0349-19005f6e69d...
12 of 15 8/5/2022, 10:02 PM
7. Install the EVAP canister hose (A) and brake booster vacuum hose (B).
8. Install the throttle cable, then adjust it.
9. Install the cruise control actuator cable, then adjust it.
2006 Acura RSX • MotoLogic https://www.motologic.com/car/ec50af00-3e3c-012c-0349-19005f6e69d...
13 of 15 8/5/2022, 10:02 PM
10. Install the air cleaner housing (A) and connect the IAT sensor connector (B).
11. Install the breather hose (C).
12. Install the intake manifold cover.
13.
After installation, check that all tubes, hoses, and connectors are installed correctly.
14. Refill the radiator with engine coolant, and bleed air from the cooling system with the heater valve open.
15. Clean up any spilled engine coolant.
2006 Acura RSX • MotoLogic https://www.motologic.com/car/ec50af00-3e3c-012c-0349-19005f6e69d...
14 of 15 8/5/2022, 10:02 PM
2006 Acura RSX • MotoLogic https://www.motologic.com/car/ec50af00-3e3c-012c-0349-19005f6e69d...
15 of 15 8/5/2022, 10:02 PM
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15

Skunk2 RACING Intake Manifold K20A3 User manual

Brand
Skunk2 RACING
Model
Intake Manifold K20A3
Type
User manual

Skunk2 RACING Intake Manifold K20A3

This high-performance intake manifold is designed to improve airflow and increase horsepower and torque for K20A3 engines. It features a larger plenum volume, optimized runner lengths, and a unique tumble flap design that promotes better air/fuel mixing. The manifold is constructed from lightweight aluminum for improved durability and comes with all necessary hardware for installation.

Here are some of the benefits of installing a Skunk2 RACING Intake Manifold K20A3:

  • Increased horsepower and torque
  • Improved airflow
  • Enhanced throttle response
  • Better fuel economy
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents