Cobalt Digital 9490CWDM Multi-Channel Fiber Optical Multiplexers and De-Multiplexers User manual

Cobalt Digital
Brand
Cobalt Digital
Model
9490CWDM Multi-Channel Fiber Optical Multiplexers and De-Multiplexers
Category
Wire connectors
Type
User manual

Cobalt Digital 9490CWDM Multi-Channel Fiber Optical Multiplexers and De-Multiplexers

These devices allow for the transmission of multiple optical signals over a single fiber optic cable. The multiplexers combine multiple signals onto a single fiber, while the demultiplexers separate the signals back into their individual channels. This can be useful for a variety of applications, such as:

  • Transmitting multiple video signals over a single fiber optic cable
  • Combining multiple data signals onto a single fiber optic cable
  • Extending the range of a fiber optic signal by using a multiplexer and demultiplexer at each end of the link

Cobalt Digital 9490CWDM Multi-Channel Fiber Optical Multiplexers and De-Multiplexers

These devices allow for the transmission of multiple optical signals over a single fiber optic cable. The multiplexers combine multiple signals onto a single fiber, while the demultiplexers separate the signals back into their individual channels. This can be useful for a variety of applications, such as:

  • Transmitting multiple video signals over a single fiber optic cable
  • Combining multiple data signals onto a single fiber optic cable
  • Extending the range of a fiber optic signal by using a multiplexer and demultiplexer at each end of the link
Cobalt Digital Inc.
2406 E. University Ave.
Urbana, IL 61802
Voice 217.344.1243 • Fax 217.344.1245
www.cobaltdigital.com • info@cobaltdigital.com
2014 Cobalt Digital Inc. All Rights Reserved. E&OE 9490CWDM8-OM_V1.1
9490CWDM-8M-LC
8-Channel CWDM Multiplexer
9490CWDM-8D-LC
8-Channel CWDM Demultiplexer
Installation Instructions
This manual provides safety and installation instructions for the 9490CWDM-8M-LC 8-Channel CWDM Multiplexers and 9490CWDM-8D-LC 8-Channel
CWDM Demultiplexers. All units use type LC connectors and use the following wavelength divisions:
9490CWDM-8M-LC 8-Ch mux; 1270nm - 1290nm - 1310nm - 1330nm - 1350nm - 1370nm - 1430nm - 1450nm
9490CWDM-8MX-LC 8-Ch mux with expansion port; 1470nm - 1490nm - 1510nm - 1330nm - 1530nm - 1550nm - 1570nm - 1590nm
9490CWDM-8D-LC 8-Ch demux; 1270nm - 1290nm - 1310nm - 1330nm - 1350nm - 1370nm - 1430nm - 1450nm
9490CWDM-8DX-LC 8-Ch demux with expansion port; 1470nm - 1490nm - 1510nm - 1330nm - 1530nm - 1550nm - 1570nm - 1590nm
Laser Safety Instructions and Notices
• Do not look into fiber cable ends or connectors.
• Only trained and authorized personnel shall be permitted to perform laser/fiber optic installation and/or maintenance.
9490CWDM-8MX-LC and 490CWDM-8DX Block Diagrams
Unit Installation and Rear I/O Module Connections
Install the mux/de-mux units and connect fiber cabling as shown in the illustration below and as described below.
1. Install the rear module in the desired 20-slot frame slot pair (mux or de-mux unit and its rear module occupies 2 card slots).
2. Install the mux or demux unit in the frame to mate with the rear module.
3. Remove protective caps on couplers and install cable onto connectors.
Please see other side
9490CWDM-8MX-LC 8-Channel CWDM Multiplexer 9490CWDM-8DX-LC 8-Channel CWDM Demultiplexer
Note: Depending on model, wavelength designations for the mux/demux ports may vary from those shown here. Refer to label on rear module
for wavelength designations.
2014 Cobalt Digital Inc. All Rights Reserved. E&OE 9490CWDM8-OM_V1.1
Typical 9490CWDM-8MX-LC / 9490CWDM-8DX-LC Rear Module Connections
9490CWDM-8MX-LC / 9490CWDM-8DX-LC Specifications
Note: Depending on model, wavelength
designations for the mux/demux ports
may vary from those shown here.
Refer to label on rear module for
wavelength designations.
.
Item Characteristic
Part number, nomenclature, and filter
wavelength divisions
9490CWDM-8M-LC 8-Channel Optical Mux
1270nm - 1290nm - 1310nm - 1330nm - 1350nm - 1370nm - 1430nm - 1450nm.
Includes type LC connector Rear I/O Module
9490CWDM-8MX-LC 8-Channel Optical Mux with expansion port
1470nm - 1490nm - 1510nm - 1530nm - 1550nm - 1570nm - 1590nm - 1610nm.
Includes type LC connector Rear I/O Module
9490CWDM-8D-LC 8-Channel Optical De-Mux
1270nm - 1290nm - 1310nm - 1330nm - 1350nm - 1370nm - 1430nm - 1450nm.
Includes type LC connector Rear I/O Module
9490CWDM-8DX-LC 8-Channel Optical De-Mux with expansion port
1470nm - 1490nm - 1510nm - 1530nm - 1550nm - 1570nm - 1590nm - 1610nm.
Includes type LC connector Rear I/O Module
Insertion Loss
Note: When used as a pair, max. 4.1 dB
insertion loss (exluding expansion port)
3.1 dB (max) per channel (mux or demux)
3.0 dB (max) (expansion port; mux or demux)
Adjacent Channel Isolation 30 dB (min)
Non-Adjacent Channel Isolation 40 dB (min)
Passband Ripple 0.3 dB
Channel Passband +/- 6.5 nm
Channel Spacing 20 nm
Return Loss 50 dB (min)
Frame Slot Usage 2 per unit
Connector Type Single Mode, Type LC/UPC
  • Page 1 1
  • Page 2 2

Cobalt Digital 9490CWDM Multi-Channel Fiber Optical Multiplexers and De-Multiplexers User manual

Cobalt Digital
Brand
Cobalt Digital
Model
9490CWDM Multi-Channel Fiber Optical Multiplexers and De-Multiplexers
Category
Wire connectors
Type
User manual

Cobalt Digital 9490CWDM Multi-Channel Fiber Optical Multiplexers and De-Multiplexers

These devices allow for the transmission of multiple optical signals over a single fiber optic cable. The multiplexers combine multiple signals onto a single fiber, while the demultiplexers separate the signals back into their individual channels. This can be useful for a variety of applications, such as:

  • Transmitting multiple video signals over a single fiber optic cable
  • Combining multiple data signals onto a single fiber optic cable
  • Extending the range of a fiber optic signal by using a multiplexer and demultiplexer at each end of the link
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents