AMG CWDM4.4 Instruction Sheet

AMG
Brand
AMG
Model
CWDM4.4
Category
Fiber optic adapters
Type
Instruction Sheet

AMG CWDM4.4 is a 1U 19” rackmount 4 way 4 CWDM wavelength multiplexer or de-multiplexer. It is a passive optical device that can be used to combine or split 4 CWDM wavelengths. The device has four common ports (1A, 2A, 1B, 2B) and each port can support 4 CWDM wavelengths (CWDM1, CWDM2, CWDM3, and CWDM4). The CWDM4.4 has a maximum insertion loss of 2dB, a minimum adjacent channel isolation of 30dB, a minimum non-adjacent channel loss of 40dB, and a minimum return loss of 45dB. The device is designed to be used with single-mode fiber and has FC/PC connectors. The CWDM4.

AMG CWDM4.4 is a 1U 19” rackmount 4 way 4 CWDM wavelength multiplexer or de-multiplexer. It is a passive optical device that can be used to combine or split 4 CWDM wavelengths. The device has four common ports (1A, 2A, 1B, 2B) and each port can support 4 CWDM wavelengths (CWDM1, CWDM2, CWDM3, and CWDM4). The CWDM4.4 has a maximum insertion loss of 2dB, a minimum adjacent channel isolation of 30dB, a minimum non-adjacent channel loss of 40dB, and a minimum return loss of 45dB. The device is designed to be used with single-mode fiber and has FC/PC connectors. The CWDM4.

AMG Systems Ltd. reserve the right to make changes to this document without
notice. The information herein is believed to be accurate. No responsibility is
assumed by AMG for its use.
Page 1 of 2 CWDM4.4 Instruction Sheet
D16164-00
CWDM4.4
Instruction Manual
Four Way Four Channel CWDM Mux/Demux
The CWDM4.4 is a 1U 19” rackmount 4 way 4 CWDM wavelength multiplexer or de-multiplexer. Each
COMxx port can combine or split 4 CWDM wavelengths.
Connections
Connectors .........................................FC/PC.
Common Ports.....................................1A, 2A, 1B, 2B
Wavelengths
CWDM1.....................................1530nm
CWDM2.....................................1550nm
CWDM3.....................................1570nm
CWDM4.....................................1590nm
Fibre Size ............................................Singlemode
Max. Insertion Loss .............................2dB
Min. Adjacent Channel Isolation..........30dB
Min. Non-Adjacent Channel Loss........40dB
Min. Return Loss .................................45dB
Physical Information
Dimensions
Height ..................................................1U
Width....................................................19” Rackmount (removable mountings ears either front or rear
fitting
Depth ...................................................250mm (excluding connectors)
Weight..................................................1500grams
CWDM4-4
Com1B
Com2B
1510nm
1510nm
1530nm
1530nm
1550nm
1550nm
1570nm
1570nm
Com1A
Com2A
1510nm
1510nm
1530nm
1530nm
1550nm
1550nm
1570nm
1570nm
AMG Systems Ltd. reserve the right to make changes to this document without
notice. The information herein is believed to be accurate. No responsibility is
assumed by AMG for its use.
Page 2 of 2 CWDM4.4 Instruction Sheet
D16164-00
Safety
The CWDM4.4 is a passive optical device, however can combine multiple optical signals onto the same
optical fibre. Always ensure that combined optical signals are within the safety limits requirements of the
system.
It is always advisable to follow good practice when working with optical fibre systems. This includes:
Do not stare with unprotected eyes or with any unapproved collimating device at fibre ends or
connector faces, or point them at other people.
Use only approved filtered or attenuating viewing aids
For other safety issues and advice on good practice associated with the optical fibres systems see EN
60825-2:2000 or your local safety officer.
Maintenance and Repair
There are no user serviceable parts within the CWDM4.4 products.
In case of problem or failure contact your local support centre or AMG Systems Ltd, Technical Support
Department on tel. +44 (0) 1767 600777.
  • Page 1 1
  • Page 2 2

AMG CWDM4.4 Instruction Sheet

AMG
Brand
AMG
Model
CWDM4.4
Category
Fiber optic adapters
Type
Instruction Sheet

AMG CWDM4.4 is a 1U 19” rackmount 4 way 4 CWDM wavelength multiplexer or de-multiplexer. It is a passive optical device that can be used to combine or split 4 CWDM wavelengths. The device has four common ports (1A, 2A, 1B, 2B) and each port can support 4 CWDM wavelengths (CWDM1, CWDM2, CWDM3, and CWDM4). The CWDM4.4 has a maximum insertion loss of 2dB, a minimum adjacent channel isolation of 30dB, a minimum non-adjacent channel loss of 40dB, and a minimum return loss of 45dB. The device is designed to be used with single-mode fiber and has FC/PC connectors. The CWDM4.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents