2. Breezesta
  3. Left Windsail Chair

Breezesta Left Windsail Chair Assembly Instructions

  • Hello! I am a chat assistant, and I have read the instructions for the BREEZESTA LEFT WINDSAIL Adirondack Chair AD-0103. This document provides a detailed step-by-step guide to assembling this recycled poly furniture. It includes information about the different parts, assembly steps, and the specific screws and bolts to be used. I am ready to answer any questions you might have about the assembly process or the components of this chair.
  • What is included in the parts list?
    What are the first steps for assembly?
    How are the arms attached?
    How are the back slats attached?
Attach Spreader to legs with screws (D) as shown. Bolt legs to
base assembly using bolts (A).
Fit arms on top of legs and attached with
screws (D) through top as shown.
Bolt back assembly to base assembly using 2 bolts (A) on
each side as shown. Attach arm to seat back using Large
Head Screws (E).
Attach right and Left Back Slats to Back
Assembly using screws (B) and (C) as shown. A
Ver 13.0
A-1.5"(6 pcs.)
C-1.75"(6 pcs.) un-painted
D-1.5"(6 pcs.)painted
E-3"(2 pcs.)painted
B-2.5"(2 pcs.)painted
A
A
LEGS
BASE ASSEMBLY
STEP 1 SPREADER
D
D
D
STEP 2
D
ARMS
STEP 4
E Install from
back(see inset detail
above).
BREEZESTA tm
Recycled Poly Furniture
LEFT WINDSAIL ADIRONDACK CHAIR
LIST OF PARTS
Back Assembly (1)
Back Slats (1R) (1L)
Base Assembly (1)
Legs (2)
Spreader (1)
Arms (1R) (1L)
Chair Bolts "A" (6)
Colored Screws "B" (2)
Un-Colored Screws "C" (6)
Colored Screw "D" (6)
Colored Screws "E" (2)
Insert Bit Tool (1)
E
AD-0103
/