2. Breezesta
  3. Shoreline Adirondack Rocker

Breezesta Shoreline Adirondack Rocker Assembly Instructions

  • Hello! I've reviewed the instructions for the Shoreline AD-0110 Adirondack Rocker. This document provides detailed steps on how to assemble the rocker, including attaching the legs, spreader, arms, and back assembly using specified bolts and screws. I am ready to answer any questions you might have about the assembly process or the parts involved.
  • What type of bolts are used to attach the legs to the base assembly?
    What type of screws are used to attach the spreader to legs?
    How many bolts are used to attach the back assembly to the base assembly?
Attach Spreader to legs with screws (B) as shown. Bolt legs to
base assembly using bolts (A).
Fit arms on top of legs and attached with
screws (B) through top as shown.
Bolt back assembly to base assembly using 2 bolts (A) on
each side as shown. Attach arm to seat back using Large
Head Screws (C). Bolt rocker legs to using bolt (A) as
shown. A
Ver 13.0
A-1.5"(12 pcs.)
B-1.5"(6 pcs.)painted
C-3"(2 pcs.)painted
A
A
LEGS
BASE ASSEMBLY
STEP 1 SPREADER
B
B
B
STEP 2
B
ARMS
D Install from
back(see inset detail
above).
STEP 3
A
A
BREEZESTA tm
Recycled Poly Furniture
SHORELINE ADIRONDACK ROCKER
LIST OF PARTS
Back Assembly (1)
Base Assembly (1)
Legs (2)
Spreader (1)
Arms (1R) (1L)
Rocker Legs (2)
Chair Bolts "A" (12)
Colored Screws "B" (6)
Colored Screws "C" (2)
Insert Bit Tool (1)
C
/