Breezesta Fanback Adirondack Rocker Assembly Instructions

Brand
Breezesta
Model
Fanback Adirondack Rocker
Type
Assembly Instructions
Attach Spreader to legs with screws (B) as shown. Bolt legs to
base assembly using bolts (A).
Fit arms on top of legs and attached with
screws (B) through top as shown.
Bolt back assembly to base assembly using 2 bolts (A) on
each side as shown. Attach arm to seat back using Large
Head Screws (C). Bolt Rocker legs to legs using bolt (A)
as shown.
A
Ver 13.0
A-1.5"(12 pcs.)
B-1.5"(6 pcs.)painted
C-3"(2 pcs.)painted
A
A
LEGS
BASE ASSEMBLY
STEP 1 SPREADER
B
B
STEP 2
B
ARMS
B
A
C Install from
back(see inset detail
above).
STEP 3
A
BREEZESTA tm
Recycled Poly Furniture
FANBACK ADIRONDACK ROCKER
LIST OF PARTS
Back Assembly (1)
Base Assembly (1)
Legs (2)
Spreader (1)
Arms (1R) (1L)
Rocker Legs (2)
Chair Bolts "A" (12)
Colored Screws "B" (6)
Colored Screws "C" (2)
Insert Bit Tool (1)
C
  • Page 1 1

Breezesta Fanback Adirondack Rocker Assembly Instructions

Brand
Breezesta
Model
Fanback Adirondack Rocker
Type
Assembly Instructions
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents