Breezesta Folding Adirondack Rocker Assembly Instructions

Brand
Breezesta
Model
Folding Adirondack Rocker
Type
Assembly Instructions
Attach Spreader tenon into mortise (pocket) on Legs and attach
with screws (C) as shown. Bolt legs to Base Assembly using bolts
(A). 2. Tenons on the Back Assembly will fit into mortise
(pocket) in Seat Assembly. Attach with Screws (B)
as shown).
3. Attach Seat Assembly to Front Legs using Bolt
(A). Bevel edge should face rear as shown in step
1.
6. After folding down the
legs as shown in step 5,
attach the Pivot Arm and
Back Assembly to the Seat
Base using Bolt (A) and
Washer (E).
Stand Chair and from back
of Seat Assembly attach Arm
Rest with Screw (D).
4. Attach Pivot Arm to Back
Assembly as shown in the
detail drawing above.
5. Attach Arm Rest Asseblies using Bolt (A) with
washer (E) between Legs and Arm Rest connection
point.
B
Ver 13.0
A-1.5"(6 pcs.)
B-1.75"(4 pcs.)
C-1.5"(2 pcs.)
D-3"(4 pcs.)painted
E-(6 pcs.)
LEGS
STEP 1
FRONT SPREADER
C
STEP 2
Seat Assembly
B
BACK SPREADER
STEP 3
A
BREEZESTA tm
Recycled Poly Furniture
FOLDING ADIRONDACK CHAIR
LIST OF PARTS
Back Assembly (1)
Seat Assembly (1)
Front Legs (2)
Front Spreader (1)
Back Spreader (1)
Pivot Arms (2)
Arm Rest Assemblies (2)
Chair Bolts "A" (6)
Colored Screws "B" (4)
Colored Screws "C" (2)
Lg. Headed Screws "D" (4)
Washers "E" (6)
Insert Bit Tool (1)
. Attach Pivot Arms to bottom of Bottom Assembly using large
Back Assembly
STEP 4
ASTEP 6
A
E
D
STEP 5
Angled Edge
AD-0106
  • Page 1 1

Breezesta Folding Adirondack Rocker Assembly Instructions

Brand
Breezesta
Model
Folding Adirondack Rocker
Type
Assembly Instructions
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents