TACTIK Winch Ready Front Bumper Installation guide

Brand
TACTIK
Model
Winch Ready Front Bumper
Type
Installation guide

This manual is also suitable for

To be safe while installing this product, read all messages and understand all instructions.
Mount a winch per the winch maker instructions. Use safe winching practices.
Always wear safety glasses while installing or working on this product. Recheck nuts and
bolts and re-torque after 250 miles. Periodically check the nuts and bolts during the life of
the product. Do not use this product if it is damaged. Check state and local laws regarding
permitted bumper sizes, types and heights.
Winch-Ready Front Bumper with Overrider Hoop
Installation Manual for 1997-2006 - Wrangler TJ #TJFBTB-001
TJ_WINCH_READY_F_BUMPER_TJFBTB-001.indd 1TJ_WINCH_READY_F_BUMPER_TJFBTB-001.indd 1 4/22/20 1:27 PM4/22/20 1:27 PM
A
B
C
D
E
F
G
Winch Ready Front Bumper Parts & Tools
REQUIRED TOOLS:
Safety Glasses
Ratchet Driver
3/4” Wrench
T55 Torx Bit
10mm Socket
KIT CONTENTS LIST:
A.) Front Bumper (1)
B.) D-Rings (2)
C.) D-Ring Washers (4)
D.) D-Ring Isolators (2)
E.) 1/2” Washers (6)
F.) 1/2” Split Washers (6)
G.) 1/2” Bolts (6)
2
TJ_WINCH_READY_F_BUMPER_TJFBTB-001.indd 2TJ_WINCH_READY_F_BUMPER_TJFBTB-001.indd 2 4/22/20 1:27 PM4/22/20 1:27 PM
Step 1
Step 3
Step 5
Step 2
Put on safety glasses. Factory Bumper Removal: Using
a T55 bit and socket remove the upper bumper bolts
and/or tow hooks on both sides. (Step 1)
Remove the two 10mm bolts on either side of the
Factory frame cover. Remove and discard the frame
cover. (Step 3)
Install D-rings and isolators. (Step 5)
Remove the lower bumper bolts with and T55 socket
on both sides. (Step 2) Remove and discard the factory
bumper.
Bumper Installation: Install the new bumper over the
frame rails and align the mounting holes. Install (6) ½”
bolts, split washers, and fl at washers into the upper
and lower frame holes on the right and left side of the
bumper. Tighten with a ¾” wrench. (Step 4)
Step 4
3
TJ_WINCH_READY_F_BUMPER_TJFBTB-001.indd 3TJ_WINCH_READY_F_BUMPER_TJFBTB-001.indd 3 4/22/20 1:27 PM4/22/20 1:27 PM
  • Page 1 1
  • Page 2 2
  • Page 3 3

TACTIK Winch Ready Front Bumper Installation guide

Brand
TACTIK
Model
Winch Ready Front Bumper
Type
Installation guide
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents